CaseIH Farmall 80CL

The CaseIH Farmall 80CL is a tractor produced by Caseih. It is equipped with a 207.5 ci 3.4 L engine. The listed engine power is Diesel (listed): 74 hp / 55.2 kW. Transmission: 32 forward and 16 reverse.

Engine Power

Diesel (listed): 74 hp / 55.2 kW

Fuel & Capacities

19.8 gal 74.9 L

Transmission

32 forward and 16 reverse

Overview

	2024 - CL SeriesOrchard/Vineyard tractor
2024 -
CL Series
Orchard/Vineyard tractor

Production
Manufacturer	CaseIH (a part of CNH)
Orchard/Vineyard tractor

CaseIH Farmall 80CL Engine
FPT 3.4L 4-cyl diesel
Cab Fuel tank	19.8 gal 74.9 L
ROPS Fuel tank	17.2 gal 65.1 L
Engine details ...

CaseIH Farmall 80CL Power
Engine	74 hp 55.2 kW
PTO (claimed)	65 hp 48.5 kW

Mechanical
Four-wheel drive
ROPS. Cab optional.

Hydraulics
Valves	3
Pump flow	16.9 gpm 64.0 lpm
	21 gpmOptOptional 79.5 lpm

Tractor hitch
Rear Type	II
Rear lift	1433 lbs 650 kg

Power Take-off (PTO)
Rear PTO Type	540 (1.375)
Mid PTO Type	2000

Dimensions & Tires
Wheelbase	65.9 inches 167 cm
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Battery volts	12

Engine

Engine Detail — 207.5 ci / 3.4 L Diesel

Manufacturer	FPT
Configuration	turbocharged aftercooled diesel, 4-cylinder, liquid-cooled
Displacement	207.5 ci 3.4 L
Bore/Stroke	3.898x4.331 inches 99 x 110 mm
Emissions	Tier IV
Power	74 hp 55.2 kW
Rated RPM	2300
Starter	electric
Starter volts	12

Transmission

Transmission options
16-speed power shuttle
32-speed partial power shift

Transmission — 16 forward and reverse power shuttle

Type	power shuttle
Gears	16 forward and reverse
Clutch	wet disc

Transmission — 32 forward and 16 reverse partial power shift

Type	partial power shift
Gears	32 forward and 16 reverse
Clutch	wet disc

Dimensions

CaseIH Farmall 80CL Tires

Dimensions
Wheelbase	65.9 inches 167 cm

Recommended Implements & Sizing Guide

Engineering recommendations for Caseih Farmall 80CL based on its 74 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Farmall 80CL.

Estimated Continuous Field Runtime: 5.1 hrs

Approximately 5.1 hours of continuous field operation at ~75% rated power on a full tank (19.8 gal / 75 L).

Estimated 75% Load Fuel Burn~3.8 gal/hr (14.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours