CaseIH Puma 150 X
The CaseIH Puma 150 X is a tractor produced by Caseih. It is equipped with a 410.6 ci 6.7 L engine. The listed engine power is Diesel (gross): 150 hp / 111.9 kW. Transmission: 19 forward and 6 reverse.
Engine Power
Diesel (gross): 150 hp / 111.9 kW
Fuel & Capacities
87.2 gal
330.1 L
Transmission
19 forward and 6 reverse
Overview
 | 2018 -
Puma SeriesRow-Crop tractor |
|---|---|
2018 - | |
Puma Series | |
Row-Crop tractor | |
Production | |
|---|---|
Manufacturer | CaseIH |
Row-Crop tractor | |
Built in St. Valentin, Austria | |
CaseIH Puma 150 X Engine | |
|---|---|
FPT 6.7L 6-cyl diesel | |
Fuel tank | 87.2 gal
330.1 L |
Exhaust fluid (DEF) | 12.7 gal
48.1 L |
Engine details ...  | |
CaseIH Puma 150 X Power | |
|---|---|
Engine (gross) | 150 hp
111.9 kW |
Engine (max) | 165 hp
123.0 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Differential lock | rear standard |
Power steering | |
Hydraulic wet disc brakes | |
Trailer brakes | hydraulic |
pneumatic OptOptional | |
Cab standard with air-conditioning. | |
Hydraulics | |
|---|---|
Type | pressure flow compensated |
Pressure | 3045 psi
210.0 bar |
Rear valves | 4 |
Mid valves | 3 |
Pump flow | 29.1 gpm
110.1 lpm |
Tractor hitch | |
|---|---|
Rear Type | III/II |
Control | electronic draft control |
Rear lift (at 24"/610mm) | 14586 lbs
6616 kg |
Front lift | 7873 lbs
3571 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/540E/1000 (1.375) |
540/1000/1000E (1.375) | |
Engine RPM | 540@1969 |
540E@1546 | |
1000@1893 | |
1000E@1621 | |
Front PTO Type | 1000 |
Engine RPM | 1000@1895 |
Dimensions & Tires | |
|---|---|
Front tire | 380/85R28 |
Rear tire | 460/85R38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 120 |
200 OptOptional | |
Battery volts | 12 |
Engine
Engine Detail — 410.6 ci / 6.7 L Diesel
Manufacturer | FPT |
Configuration | turbocharged intercooled diesel, 6-cylinder 24-valve, liquid-cooled |
Displacement | 410.6 ci
6.7 L |
Bore/Stroke | 4.09x5.20 inches
104 x 132 mm |
Emissions | Stage IV |
Rated Power (gross) | 150 hp
111.9 kW |
Maximum Power (gross) | 165 hp
123.0 kW |
Rated RPM | 2200 |
Torque | 516 lb-ft
699.7 Nm |
Torque RPM | 1500 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
18-speed partial power shift | |
19-speed partial power shift |
Transmission — 18 forward and 6 reverse partial power shift
Type | partial power shift |
Gears | 18 forward and 6 reverse |
Transmission — 19 forward and 6 reverse partial power shift
Type | partial power shift |
Gears | 19 forward and 6 reverse |
Dimensions
CaseIH Puma 150 X Tires | |
|---|---|
Standard tires (ag) | Front: 380/85R28. Rear: 460/85R38 |
Dimensions | |
|---|---|
Flange rear axle | |
Bar rear axle | 98 inch length
2489 mmOptOptional |
Photos
CaseIH Puma 150 X tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Caseih Puma 150 X based on its 150 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Puma 150 X.
Estimated Continuous Field Runtime: 11.2 hrs
Approximately 11.2 hours of continuous field operation at ~75% rated power on a full tank (87.2 gal / 330.1 L).
Estimated 75% Load Fuel Burn~7.8 gal/hr (29.5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Caseih Puma 150 X Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Caseih Puma 150 X.
Converted Equivalents:
Horsepower (HP)150 hp
Kilowatts (kW)111.9 kW
Metric Horsepower (PS / CV)152.1 PS
Direct Competitor Comparison
Compare CaseIH Puma 150 X against same-era industry alternatives in the same horsepower class.
Current Model
Caseih
CaseIH Puma 150 X
Engine Power:Diesel (gross): 150 hp / 111.9 kW
★ Baseline Reference
Related models
CaseIH CVX 120
- Power:
- 120
- Production years:
- 2000 - 2003
CaseIH Farmall 115A
- Power:
- 120
- Production years:
- 2020 - 2026
CaseIH Farmall 120M
- Power:
- 120
- Production years:
- 2024 - 2026
CaseIH MX120
- Power:
- 120
- Production years:
- 1997 - 2002
CaseIH MXM120
- Power:
- 122
- Production years:
- 2002 - 2007