CaseIH Farmall 115A

The CaseIH Farmall 115A is a tractor produced by Caseih. It is equipped with a 207 ci 3.4 L engine. The listed engine power is Diesel (listed): 120 hp / 89.5 kW. Transmission: 20 forward and reverse. Operating weight: 7304 to 8492 pounds.

Engine Power

Diesel (listed): 120 hp / 89.5 kW

Fuel & Capacities

23.8 gal 90.1 L

Transmission

20 forward and reverse

Operating Weight

7304 to 8492 pounds

Overview

	2020 - Utility tractor
2020 -
Utility tractor

Production
Manufacturer	CaseIH
Utility tractor

CaseIH Farmall 115A Engine
FPT 3.4L 4-cyl diesel
ROPS Fuel tank	23.8 gal 90.1 L
Cab Fuel tank	29 gal 109.8 L
Exhaust fluid (DEF)	2.9 gal 11.0 L
Engine details ...

CaseIH Farmall 115A Power
Engine	120 hp 89.5 kW
PTO (claimed)	100 hp 74.6 kW

Mechanical
Two- or four-wheel drive
Final drives	inboard planetary
Power steering
Wet disc brakes
Two-post folding ROPS. Cab optional with air-conditioning.

Hydraulics
Type	open center
Rear valves	2 or 3
Pump flow	16.9 gpm 64.0 lpm
	21.6 gpmOptOptional 81.8 lpm

Tractor hitch
Rear Type	II/I
Control	top-link draft sensing
Rear lift (at ends)	4409 lbs 1999 kg
Rear lift (at 24"/610mm)	3200 lbs 1451 kg
	7716 lbsOptOptional 3499 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540 (1.375)
	540/1000 (1.375)

Dimensions & Tires
2WD Wheelbase	91 inches 231 cm
4WD ROPS Wheelbase	84 inches 213 cm
4WD Cab Wheelbase	89 inches 226 cm
Weight	7304 to 8492 pounds
Front tire	10.00-16
2WD Rear tire	18.4-30
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	120
Battery volts	12

References

Farmall Utility 95A/105A/115A Series Tractors published in 2019, by CaseIH
Farmall Utility Series Tractors published in 2021, by CaseIH

Engine

Engine Detail — 207 ci / 3.4 L Diesel

Manufacturer	FPT F5G
Configuration	turbocharged aftercooled diesel, 4-cylinder, liquid-cooled
Displacement	207 ci 3.4 L
Bore/Stroke	3.90x4.33 inches 99 x 110 mm
Emissions	Tier IV
Power	120 hp 89.5 kW
Fuel system	electronic high-pressure common rail direct injection
Rated RPM	2300
Starter	electric
Starter volts	12

Transmission

Transmission options
12-speed power shuttle
20-speed creeper

Transmission — 12 forward and reverse power shuttle

Type	power shuttle
Gears	12 forward and reverse
Transmission
Type	creeper
Gears	20 forward and reverse

Dimensions

CaseIH Farmall 115A Tires
2WD Standard tires (ag)	Front: 10.00-16. Rear: 18.4-30
4WD Standard tires (ag)	Front: 12.4-24. Rear: 18.4-30
2WD Optional tires (ag)	Front: 7.5-16. Rear: 16.9-30
4WD Optional tires (ag)	Front: 10-16. Rear: 16.9-34

Dimensions
2WD Wheelbase	91 inches 231 cm
4WD ROPS Wheelbase	84 inches 213 cm
4WD Cab Wheelbase	89 inches 226 cm
2WD Length	162 inches 411 cm
4WD Length	161 inches 408 cm
Height (ROPS)	103 inches 261 cm
Height (cab)	106 inches 269 cm
Flange rear axle

CaseIH Farmall 115A Weight
2WD ROPS	7304 lbs 3313 kg
2WD Cab	8173 lbs 3707 kg
4WD ROPS	7689 lbs 3487 kg
4WD Cab	8492 lbs 3851 kg

Recommended Implements & Sizing Guide

Engineering recommendations for Caseih Farmall 115A based on its 120 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Farmall 115A.

Estimated Continuous Field Runtime: 3.8 hrs

Approximately 3.8 hours of continuous field operation at ~75% rated power on a full tank (23.8 gal / 90.1 L).

Estimated 75% Load Fuel Burn~6.2 gal/hr (23.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours