Challenger 65D
The Challenger 65D is a tractor produced by Challenger. It is equipped with a 636 ci 10.4 L engine. The listed engine power is Diesel (gross): 300 hp / 223.7 kW. Transmission: 10 forward and 2 reverse. Drive type: crawler. Operating weight: 35235 lbs 15982 kg.
Overview
![]() | 1995 - 1997
Agricultural Crawler tractor |
|---|
Production | |
|---|---|
Manufacturer | Challenger (a part of Caterpillar) |
Agricultural Crawler tractor | |
Original price was $129,000 in 1997 | |
During official testing, the Challenger 65D hydraulics were unable to supply 27 GPM as advertised. At maximum power, the flow was 21.6 GPM. | |
Challenger 65D Engine | |
|---|---|
Caterpillar 10.4L 6-cyl diesel | |
Fuel tank | 209 gal
791.1 L |
Engine details ... | |
Challenger 65D Transmission | |
|---|---|
10-speed full power shift | |
Transmission details ... |
Challenger 65D Power | |
|---|---|
Engine (gross) | 300 hp
223.7 kW |
Drawbar (tested) | 235.26 hp
175.4 kW |
PTO (tested) | 256.15 hp
191.0 kW |
Performance test details ... | |
Mechanical | |
|---|---|
Drive | crawler |
Steering | hydrostatic differential steering |
Hydraulic wet disc brakes | |
Cab standard with air-conditioning. | |
Hydraulics | |
|---|---|
Type | closed-center pressure-compensated |
Valves | 4 |
Pump flow | 27 gpm
102.2 lpm |
35 gpmOptOptional
132.5 lpm | |
Tractor hitch | |
|---|---|
Rear Type | III |
Rear lift | 15,084 lbs
6842 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 1000 (1.75) |
Dimensions & Tracks | |
|---|---|
Wheelbase | 107 inches
271 cm |
Weight | 35235 lbs
15982 kg |
25-inch tracks | |
Full dimensions and tracks ... | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 145 |
Batteries | 2 |
Battery volts | 12 |
References | |
|---|---|
![]() | |
Challenger 65D Agricultural Tractor published in 1995, by Caterpillar |
Engine
Engine Detail — 636 ci / 10.4 L Diesel
Manufacturer | Caterpillar 3306 DITA |
Configuration | turbocharged intercooled diesel, 6-cylinder, liquid-cooled |
Displacement | 636 ci
10.4 L |
Bore/Stroke | 4.75x6.00 inches
121 x 152 mm |
Power (gross) | 300 hp
223.7 kW |
Air cleaner | dual paper elements with aspirator |
Pre-heating | ether injection |
block heater | |
Compression | 15:1 |
Rated RPM | 2100 |
Starter volts | 12 |
Coolant capacity | 44 qts
41.6 L |
Transmission
Transmission — 10 forward and 2 reverse full power shift
Type | full power shift |
Gears | 10 forward and 2 reverse |
![]() | |
Dimensions
Challenger 65D Tracks | |
|---|---|
Width | 25 inches
63 cm |
Width | 30 inches
76 cm |
Width | 35 inches
88 cm |
Dimensions | |
|---|---|
Wheelbase | 107 inches
271 cm |
Length | 232 inches
589 cm |
Width | 120 inches*Width with 30-inch tracks.
304 cm |
Height (cab) | 128 inches
325 cm |
Height (exhaust) | 144 inches
365 cm |
Operating weight | 35235 lbs
15982 kg |
Gauge | 90 inches
228 cm |
Tests
OCED Tractor Test 1706 | |
|---|---|
Diesel 10-speed crawler
April 1 - 4, 1996
Link: OCED Tractor Test 1706 file | |
PTO performance | |
Power at rated engine speed | 256.15 hp
191.0 kW |
Fuel use | 15.5 gal/hour
58.7 l/hour |
Power at rated PTO speed | 268.39 hp
200.1 kW |
Fuel use | 16.1 gal/hour
60.9 l/hour |
Drawbar performance | |
Max power | 235.26 hp
175.4 kW |
Fuel use | 15.9 gal/hour
60.2 l/hour |
Gear 3 used for power test. | |
Max pull | 35,502 lbs
16103 kg |
Gear 1 used for pull test. | |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Challenger 65D based on its 300 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁 | Commercial / Field Scale | High horsepower articulated/4WD field plowing. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙 | Commercial / Field Scale | Broad-acre grain tillage for high-drawbar tractors. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Challenger 65D.
Estimated Continuous Field Runtime: 13.4 hrs
Approximately 13.4 hours of continuous field operation at ~75% rated power on a full tank (209 gal / 791.2 L).
Engine Crankcase Oil
Transmission & Hydraulic System
Engine Cooling System
Challenger 65D Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Challenger 65D.
Converted Equivalents:
Direct Competitor Comparison
Compare Challenger 65D against same-era industry alternatives in the same horsepower class.
Challenger 65D
Related models
Challenger 45
- Power:
- 240
- Production years:
- 1995 - 1998
Challenger MT595D
- Power:
- 240
- Production years:
- 2012 - 2014
Challenger MT595E
- Power:
- 240
- Production years:
- 2015 - 2020
Challenger MT645C
- Power:
- 240
- Production years:
- 2009 - 2010
Challenger MT645D
- Power:
- 240
- Production years:
- 2011 - 2013



