TractorData Logo
TractorData

Cockshutt 1950-T

The Cockshutt 1950-T is a tractor produced by Cockshutt. It is equipped with a 310 ci 5.1 L engine. The listed engine power is 105.11 hp 78.4 kW. Transmission: Hydraul-Shift. Operating weight: 10460 to 11490 pounds.

Engine Power
105.11 hp 78.4 kW
Fuel & Capacities
27.5 gal 104.1 L
Transmission
Hydraul-Shift
Operating Weight
10460 to 11490 pounds

Overview

Cockshutt 1950-T tractor photo
1967 - 1969 Row-Crop tractor
Note: the Cockshutt model 1950-T is the same as the Oliver 1950-T. The following data is from the 1950-T listing.
Production
Manufacturer
Cockshutt
Row-Crop tractor
Cockshutt 1950-T Engine
Waukesha-Oliver 5.1L 6-cyl diesel
Fuel tank
27.5 gal 104.1 L
78 gal (fender tanks) 295.2 L
Engine details ...
Cockshutt 1950-T Power
PTO (claimed)
105 hp 78.3 kW
Drawbar (tested)
89.10 hp 66.4 kW
PTO (tested)
105.24 hp 78.5 kW
Performance test details ...
Mechanical
Two- or four-wheel drive
Steering
hydraulic power
Differential disc brakes
Open operator station. Optional cab.
Hydraulics
Type
open center
Pressure
2050 psi 141.3 bar
Pump flow
16.7 gpm 63.2 lpm
Tractor hitch
Rear Type
II
III
Control
position and lower-link draft control
Rear lift (at ends)
6000 lbs 2721 kg
Power Take-off (PTO)
Rear PTO Type
540
540/1000
Dimensions & Tires
Wheelbase
109.1 inches 277 cm
Weight
10460 to 11490 pounds
Full dimensions and tires ...

Engine

Note: the Cockshutt model 1950-T is the same as the Oliver 1950-T. The following data is from the 1950-T listing.

Engine Detail — 310 ci / 5.1 L Diesel

Manufacturer
Waukesha-Oliver
Configuration
turbocharged diesel, 6-cylinder, liquid-cooled
Displacement
310 ci 5.1 L
Bore/Stroke
3.875x4.375 inches 98 x 111 mm
Air cleaner
dual dry pre-cleaners
Compression
16:1
Rated RPM
2400
Starter volts
12
Oil capacity
11.5 qts 10.9 L
Coolant capacity
20 qts 18.9 L

Transmission

Note: the Cockshutt model 1950-T is the same as the Oliver 1950-T. The following data is from the 1950-T listing.
Transmission options
6-speed gear
12-speed two-speed power shift
18-speed partial power shift

Transmission — 6 forward and 2 reverse gear

Type
gear
Gears
6 forward and 2 reverse
Clutch
330mm cera-metallic disc

Transmission — Hydra-Power

Transmission
Hydra-Power
Type
two-speed power shift
Gears
12 forward and 6 reverse
Clutch
330mm cera-metallic disc

Transmission — Hydraul-Shift

Transmission
Hydraul-Shift
Type
partial power shift
Gears
18 forward and 6 reverse
Clutch
330mm cera-metallic disc
The Hydraul-Shift provides an on-the-move power shift to a higher or lower range for each of the six forward, and two reverse, gears.

Dimensions

Note: the Cockshutt model 1950-T is the same as the Oliver 1950-T. The following data is from the 1950-T listing.
Cockshutt 1950-T Tires
Dimensions
Wheelbase
109.1 inches 277 cm
Length
159.5 inches 405 cm
Height (steering wheel)
79.4 inches 201 cm
Ground clearance
25.5 inches 64 cm
Front tread
67.5 to 91.6 inches 171 to 232 cm
Rear tread
67 to 109 inches 170 to 276 cm
Cockshutt 1950-T Weight
Operating
10,460 lbs (2WD) 4744 kg
11,490 lbs (4WD) 5211 kg
Ballasted
20,220 lbs (4WD) 9171 kg

Tests

Note: the Cockshutt model 1950-T is the same as the Oliver 1950-T. The following data is from the 1950-T listing.
Tractor Tests
NTTL 969: diesel Hydaul-Shift 2WD
NTTL 972: diesel Hydraul-Shift 4WD
Nebraska Tractor Test 969
Diesel Hydaul-Shift 2WD November 13 - 18, 1967 Link: Nebraska Tractor Test 969 file
PTO performance
Power at rated engine speed
105.24 hp 78.5 kW
Fuel use
6.5 gal/hour 24.6 l/hour
Drawbar performance
Max power
70.07 hp 52.3 kW
Fuel use
4.9 gal/hour 18.5 l/hour
Gear 4-Under used for power test.
Max pull
12,884 lbs 5844 kg
Gear 1-Over used for pull test.
Nebraska Tractor Test 972
Diesel Hydraul-Shift 4WD April 29 - May 7, 1968 Link: Nebraska Tractor Test 972 file
PTO performance
Power at rated engine speed
105.11 hp 78.4 kW
Fuel use
6.5 gal/hour 24.6 l/hour
Drawbar performance
Max power
89.10 hp 66.4 kW
Fuel use
6.6 gal/hour 25.0 l/hour
Gear 3-Direct used for power test.
Max pull
17,692 lbs 8025 kg
Gear 1-Direct used for pull test.

Attachments

Note: the Cockshutt model 1950-T is the same as the Oliver 1950-T. The following data is from the 1950-T listing.

Photos

Cockshutt 1950-T

Cockshutt 1950-T

Cockshutt 1950-T.

Cockshutt 1950-T.

Cockshutt 1950-T.

Cockshutt 1950-T.

Recommended Implements & Sizing Guide

Engineering recommendations for Cockshutt 1950-T based on its 105.11 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)Heavy DutyHeavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing
10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼Heavy DutyWide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep
90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机Commercial / Field ScaleDeep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage
10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙Heavy DutyAggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage
5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机Heavy DutyHigh density baling; requires minimum 85 PTO HP.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Cockshutt 1950-T.

Estimated Continuous Field Runtime: 5 hrs

Approximately 5 hours of continuous field operation at ~75% rated power on a full tank (27.5 gal / 104.1 L).

Estimated 75% Load Fuel Burn~5.5 gal/hr (20.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Cockshutt 1950-T Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Cockshutt 1950-T.

Converted Equivalents:

Horsepower (HP)105.1 hp
Kilowatts (kW)78.4 kW
Metric Horsepower (PS / CV)106.6 PS

Direct Competitor Comparison

Compare Cockshutt 1950-T against same-era industry alternatives in the same horsepower class.

Current Model
Cockshutt

Cockshutt 1950-T

Engine Power:105.11 hp 78.4 kW
★ Baseline Reference
Massey FergusonMarket Competitor

Massey Ferguson 1014

Engine Power:95
Production Years:1978 - 1990
View Full Specs→
Deutz-FahrMarket Competitor

Deutz-Fahr 4.71

Engine Power:95
Production Years:1990 - 1993
View Full Specs→
FordMarket Competitor

Ford 5095

Engine Power:95
View Full Specs→
DeereMarket Competitor

Deere 5095M

Engine Power:95
Production Years:2022 - 2026
View Full Specs→

Related models