Craftsman 917.28910

The Craftsman 917.28910 is a tractor produced by Craftsman Lawn Tractors. It is equipped with a 540 cc 32.95 ci engine. The listed engine power is Gasoline (gross): 20 hp / 14.9 kW. Transmission: infinite forward and reverse. Operating weight: 507 lbs 229 kg.

Engine Power

Gasoline (gross): 20 hp / 14.9 kW

Fuel & Capacities

1.5 gal 5.7 L

Transmission

infinite forward and reverse

Operating Weight

507 lbs 229 kg

Overview

	2009 LT 2000 SeriesLawn tractorHusqvarna built LT 2000 Series Lawn tractor Husqvarna built

Production
Distributor	Craftsman (a part of Sears)
Manufacturer	Husqvarna
Lawn tractor

Craftsman 917.28910 Engine
20HP Briggs & Stratton 540cc 1-cyl gasoline
Fuel tank	1.5 gal 5.7 L
Engine details ...

Craftsman 917.28910 Transmission
hydrostatic
Transmission details ...

Mechanical
Two-wheel drive
Steering	manual sector and pinion
Mechanical disc brakes
Open operator station with low-back seat

Power Take-off (PTO)
Mid PTO	independent
Clutch	manual

Dimensions & Tires
Weight	507 lbs 229 kg
Front tire	15x6-6
Rear tire	18x9.5-8
Full dimensions and tires ...

Electrical
Ground	negative
Charging amps	3 (battery)
	5 (lights)
Battery CCA	230
Battery volts	12
Battery AH	28

References

2009 Riding Equipment published by Sears

Engine

Engine Detail — 540 cc / 32.95 ci Gasoline

Manufacturer	Briggs & Stratton 331777
Fuel Type	Gasoline
Configuration	1-cylinder, air-cooled vertical-shaft
Displacement	540 cc 32.95 ci
Bore/Stroke	3.701x3.062 inches 94 x 78 mm
Power (gross)	20 hp 14.9 kW
Air cleaner	paper element
Starter	electric
Starter volts	12
Sparkplug	Champion RC12YC
Sparkplug gap	0.030 inches 0.762 mm

Transmission

Transmission — infinite forward and reverse belt-driven hydrostatic

Type	belt-driven hydrostatic
Gears	infinite forward and reverse
Oil change	sealed unit, owner service is not recommended

Dimensions

Craftsman 917.28910 Tires
Lawn/turf front	15x6-6
Lawn/turf rear	18x9.5-8

Dimensions
Weight	507 lbs 229 kg

Attachments

42" Mower deck
Type	mid-mount Craftsman
	2-blade with manual lift
Cutting width	42 inches 106 cm
Cut height	1.5 to 4 inch 3 to 10 cm
Cut positions	6

Photos

Craftsman 917.28910 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Craftsman Lawn Tractors Craftsman 917.28910 based on its 20 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	4 ft (48 in)1.2 m	Light Duty	Pasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep	42 to 48 in105 - 120 cm	Light Duty	Covers compact tractor tire width.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Craftsman Lawn Tractors Craftsman 917.28910.

Estimated Continuous Field Runtime: 1.4 hrs

Approximately 1.4 hours of continuous field operation at ~75% rated power on a full tank (1.5 gal / 5.7 L).

Estimated 75% Load Fuel Burn~1 gal/hr (3.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours

Craftsman Lawn Tractors Craftsman 917.28910 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Craftsman Lawn Tractors Craftsman 917.28910.

Enter value:

Unit:

Converted Equivalents:

Horsepower (HP)20 hp

Kilowatts (kW)14.9 kW

Metric Horsepower (PS / CV)20.3 PS

Direct Competitor Comparison

Compare Craftsman 917.28910 against same-era industry alternatives in the same horsepower class.

Current Model

Craftsman Lawn Tractors