Craftsman Professional 917.20417 Z7400

The Craftsman Professional 917.20417 Z7400 is a tractor produced by Craftsman Professional Lawn Tractors. It is equipped with a 747 cc 45.6 ci engine. The listed engine power is Gasoline (gross): 26 hp / 19.4 kW. Transmission: Hydro Gear ZT-3100. Operating weight: 700 lbs 317 kg.

Engine Power

Gasoline (gross): 26 hp / 19.4 kW

Fuel & Capacities

5 gal 18.9 L

Transmission

Hydro Gear ZT-3100

Operating Weight

700 lbs 317 kg

Overview

	2014 Z7000 SeriesZero-turn mowerHusqvarna built Z7000 Series Zero-turn mower Husqvarna built

Production
Distributor	Craftsman Professional (a part of Sears)
Manufacturer	Husqvarna
Zero-turn mower
Original price was $5300 in 2014

Craftsman Professional 917.20417 Engine
26HP Kohler 747cc 2-cyl gasoline
Fuel tank	5 gal 18.9 L
Engine details ...

Craftsman Professional 917.20417 Transmission
hydrostatic
Transmission details ...

Mechanical
Two-wheel drive
Steering	differential hydrostatic
Open operator station.

Power Take-off (PTO)
Mid PTO	independent
Clutch	Electric

Dimensions & Tires
Wheelbase	50 inches 127 cm
Weight	700 lbs 317 kg
Front tire	13x6.5x5
Rear tire	22x9.5
Full dimensions and tires ...

Electrical
Ground	negative
Charging amps	15
Battery volts	12

Engine

Engine Detail — 747 cc / 45.6 ci Gasoline

Manufacturer	Kohler KT-745
Fuel Type	Gasoline
Configuration	2-cylinder 4-valve, air-cooled vertical-shaft V-Twin
Displacement	747 cc 45.6 ci
Bore/Stroke	3.3x2.7 inches 84 x 69 mm
Power (gross)	26 hp 19.4 kW
Starter	electric
Starter volts	12
Oil change	100 h

Transmission

Transmission — Hydro Gear ZT-3100

Transmission	Hydro Gear ZT-3100
Type	hydrostatic
Gears	infinite forward and reverse
Oil capacity	2 qts (each) 1.9 L
Oil type	20W50
Oil change	200 h

	20W50

Dimensions

Craftsman Professional 917.20417 Tires
Lawn/turf front	13x6.5x5
Lawn/turf rear	22x9.5

Dimensions
Wheelbase	50 inches 127 cm
Length	75.5 inches 191 cm
Width	49 inches 124 cm
Height	42 inches 106 cm
Weight	700 lbs 317 kg
Front axle	Caster wheels

Attachments

54" Mower deck
Type	mid-mount Craftsman
	3-blade with Manual lift
Cutting width	54 inches 137 cm
Overall width	67.5 inches 171 cm
Cut height	1.5 to 4.5 inch 3 to 11 cm

Photos

Craftsman Professional 917.20417 Z7400 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Craftsman Professional Lawn Tractors Craftsman Professional 917.20417 Z7400 based on its 26 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	5 ft (60 in)1.5 m	Medium Duty	Pasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep	54 to 60 in135 - 150 cm	Medium Duty	Thorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Craftsman Professional Lawn Tractors Craftsman Professional 917.20417 Z7400.

Estimated Continuous Field Runtime: 3.7 hrs

Approximately 3.7 hours of continuous field operation at ~75% rated power on a full tank (5 gal / 18.9 L).

Estimated 75% Load Fuel Burn~1.4 gal/hr (5.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours

Craftsman Professional Lawn Tractors Craftsman Professional 917.20417 Z7400 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Craftsman Professional Lawn Tractors Craftsman Professional 917.20417 Z7400.

Enter value:

Unit:

Converted Equivalents:

Horsepower (HP)26 hp

Kilowatts (kW)19.4 kW

Metric Horsepower (PS / CV)26.4 PS

Direct Competitor Comparison

Compare Craftsman Professional 917.20417 Z7400 against same-era industry alternatives in the same horsepower class.

Current Model

Craftsman Professional Lawn Tractors