Deutz-Allis 6070
The Deutz-Allis 6070 is a tractor produced by Deutz Allis. It is equipped with a 200 ci 3.3 L engine. The listed engine power is 70.78 hp 52.8 kW. Transmission: 12 forward and 3 reverse. Drive type: 4x2 2WD. Operating weight: 6100 to 7285 pounds.
Engine Power
70.78 hp
52.8 kW
Drive & Traction
4x2 2WD
Fuel & Capacities
32 gal
121.1 L
Transmission
12 forward and 3 reverse
Operating Weight
6100 to 7285 pounds
Overview
 | 1985 - 1988
Row-Crop tractor |
|---|
Series map: 6060607070.9hp*78.6hp*6070↓ 1984-1985*Estimated engine power for comparison only.
Note: the Deutz-Allis model 6070 is the same as the Allis Chalmers 6070. The following data is from the 6070 listing. |
Production | |
|---|---|
Manufacturer | Deutz-Allis |
Row-Crop tractor | |
Built in West Allis, Wisconsin, USA | |
Total built | 972 |
Original price | $24,225 |
Deutz-Allis 6070 Engine | |
|---|---|
Allis Chalmers 3.3L 4-cyl diesel | |
Engine details ...  |
Deutz-Allis 6070 Transmission | |
|---|---|
12-speed synchronized | |
Transmission details ...  |
Deutz-Allis 6070 Power | |
|---|---|
Drawbar (tested) | 58.35 hp
43.5 kW |
PTO (tested) | 70.78 hp
52.8 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Drive | 4x2 2WD |
4x4 MFWD 4WD (optional) | |
Steering | hydrostatic power |
Differential hydraulic wet disc brakes | |
Four-post ROPS canopy. Optional cab and air-conditioning. | |
Capacity | |
|---|---|
Fuel | 32 gal
121.1 L |
Rear diff. | 37 qts
35.0 L |
Hydraulics | |
|---|---|
Type | open center |
Valves | 1 |
Pump flow | 11.4 gpm
43.1 lpm |
Total flow | 19 gpm
71.9 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift (at 24"/610mm) | 3,500 lbs
1587 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540 |
Dimensions & Tires | |
|---|---|
Wheelbase | 93 inches (2WD)
236 cm |
91.9 inches (4WD)
233 cm | |
Weight | 6100 to 7285 pounds |
Front tire | 7.50-16 |
Rear tire | 16.9-28 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Charging system | alternator |
Charging amps | 72 |
Battery volts | 12 |
Engine
Series map: 6060607070.9hp*78.6hp*6070↓ 1984-1985*Estimated engine power for comparison only.
Note: the Deutz-Allis model 6070 is the same as the Allis Chalmers 6070. The following data is from the 6070 listing. |
Engine Detail — 200 ci / 3.3 L Diesel
Manufacturer | Allis Chalmers 433T |
Configuration | turbocharged diesel, 4-cylinder, liquid-cooled inline |
Displacement | 200 ci
3.3 L |
Bore/Stroke | 3.875x4.25 inches
98 x 108 mm |
Air cleaner | paper element with pre-cleaner |
Compression | 15.1:1 |
Rated RPM | 2300 |
Starter volts | 12 |
Oil capacity | 10 qts
9.5 L |
Coolant capacity | 17 qts
16.1 L |
Transmission
Series map: 6060607070.9hp*78.6hp*6070↓ 1984-1985*Estimated engine power for comparison only.
Note: the Deutz-Allis model 6070 is the same as the Allis Chalmers 6070. The following data is from the 6070 listing. |
Transmission — 12 forward and 3 reverse synchronized
Type | synchronized |
Gears | 12 forward and 3 reverse |
Oil capacity | 12 qts
11.4 L |
Four gears, plus reverse, in three ranges. Synchronized shifting with clutch. | |
 | |
Dimensions
Series map: 6060607070.9hp*78.6hp*6070↓ 1984-1985*Estimated engine power for comparison only.
Note: the Deutz-Allis model 6070 is the same as the Allis Chalmers 6070. The following data is from the 6070 listing. |
Deutz-Allis 6070 Tires | |
|---|---|
Ag front | 7.50-16 (2WD) |
11.2-24 (4WD) | |
Ag rear | 16.9-28 (2WD) |
18.4-28 (4WD) | |
Dimensions | |
|---|---|
Wheelbase | 93 inches (2WD)
236 cm |
91.9 inches (4WD)
233 cm | |
Length | 146.5 inches
372 cm |
Width | 68.5 inches
173 cm |
Clearance (front axle) | 18.1 inches (4WD)
45 cm |
20.4 inches (2WD)
51 cm | |
Clearance (rear axle) | 26.7 inches
67 cm |
Front tread | 56 to 79 inches
142 to 200 cm |
Rear tread | 60 to 86 inches
152 to 218 cm |
Deutz-Allis 6070 Weight | |
|---|---|
Shipping | 6,100 lbs
2766 kg |
Operating | 7,285 lbs
3304 kg |
Ballasted | 10,515 lbs
4769 kg |
Deutz-Allis 6070 Height | |
|---|---|
Hood | 69.4 inches
176 cm |
ROPS | 107.7 inches
273 cm |
Cab | 103.2 inches
262 cm |
Exhaust | 110.2 inches
279 cm |
Tests
Series map: 6060607070.9hp*78.6hp*6070↓ 1984-1985*Estimated engine power for comparison only.
Note: the Deutz-Allis model 6070 is the same as the Allis Chalmers 6070. The following data is from the 6070 listing. |
Nebraska Tractor Test 1545 | |
|---|---|
Diesel 12-speed 2WD
October 19 - 26, 1984
Link: Nebraska Tractor Test 1545 file | |
PTO performance | |
Power at rated engine speed | 70.78 hp
52.8 kW |
Fuel use | 4.4 gal/hour
16.7 l/hour |
Power at rated PTO speed | 71.01 hp
53.0 kW |
Fuel use | 4.3 gal/hour
16.3 l/hour |
Drawbar performance | |
Max power | 58.35 hp
43.5 kW |
Fuel use | 4.4 gal/hour
16.7 l/hour |
Gear 3I used for power test. | |
Max pull | 7,997 lbs
3627 kg |
Gear 1I used for pull test. | |
Photos
Deutz-Allis 6070 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Deutz Allis Deutz-Allis 6070 based on its 70.78 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Allis Deutz-Allis 6070.
Estimated Continuous Field Runtime: 8.7 hrs
Approximately 8.7 hours of continuous field operation at ~75% rated power on a full tank (32 gal / 121.1 L).
Estimated 75% Load Fuel Burn~3.7 gal/hr (13.9 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Deutz Allis Deutz-Allis 6070 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Allis Deutz-Allis 6070.
Converted Equivalents:
Horsepower (HP)70.8 hp
Kilowatts (kW)52.8 kW
Metric Horsepower (PS / CV)71.8 PS
Direct Competitor Comparison
Compare Deutz-Allis 6070 against same-era industry alternatives in the same horsepower class.
Current Model
Deutz Allis
Deutz-Allis 6070
Engine Power:70.78 hp
52.8 kW
★ Baseline Reference
Related models
Deutz-Allis 6150
- Power:
- 60
Deutz-Allis 6260
- Power:
- 61
- Production years:
- 1986 - 1990
Deutz-Allis 6265
- Power:
- 70
- Production years:
- 1986 - 1989
Deutz-Allis 6060
- Power:
- 70.9
- Production years:
- 1985 - 1988
Deutz-Allis 6275
- Power:
- 75
- Production years:
- 1986 - 1990