Deutz-Allis 6265
The Deutz-Allis 6265 is a tractor produced by Deutz Allis. It is equipped with a 230 ci 3.8 L engine. The listed engine power is Diesel (listed): 70 hp / 52.2 kW. Transmission: Triple-range. Operating weight: 6922 to 8333 pounds.
Engine Power
Diesel (listed): 70 hp / 52.2 kW
Fuel & Capacities
24 gal
90.8 L
Transmission
Triple-range
Operating Weight
6922 to 8333 pounds
Overview
 | 1986 - 1989
6200 SeriesUtility tractor
6200 Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Deutz-Allis |
Utility tractor | |
Built in Germany | |
Variants | |
|---|---|
DX 3.70 | similar Deutz-Fahr model |
Deutz-Allis 6265 Engine | |
|---|---|
Deutz 3.8L 4-cyl diesel | |
Engine details ...  |
Deutz-Allis 6265 Transmission | |
|---|---|
12-speed partially synchronized | |
Transmission details ...  |
Deutz-Allis 6265 Power | |
|---|---|
Engine | 70 hp
52.2 kW |
PTO (claimed) | 65 hp
48.5 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Differential lock | mechanical rear |
Power steering | |
Hydraulic drum brakes | |
Four-post ROPS. StarCab optional. | |
Capacity | |
|---|---|
ROPS Fuel | 24 gal
90.8 L |
Cab Fuel | 28 gal
106.0 L |
Hydraulic system | 4 gal
15.1 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 4 gal
15.1 L |
Pressure | 2358 psi
162.6 bar |
Valves | 1 to 3 |
Pump flow | 11.4 gpm
43.1 lpm |
Total flow | 17.7 gpm
67.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift | 7275 lbs
3299 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540 (1.375) |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 91.5 inches
232 cm |
4WD Wheelbase | 94 inches
238 cm |
Weight | 6922 to 8333 pounds |
Front tire | 10.00-16 |
2WD Rear tire | 18.4-30 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
References | |
|---|---|
 | |
6265/6275 published in 1986, by Deutz-Allis | |
6265/6275 published in 1987, by Deutz-Allis |
Engine
Engine Detail — 230 ci / 3.8 L Diesel
Manufacturer | Deutz F4L 912 |
Fuel Type | Diesel |
Configuration | 4-cylinder, air-cooled |
Displacement | 230 ci
3.8 L |
Bore/Stroke | 3.94x4.72 inches
100 x 120 mm |
Power | 70 hp
52.2 kW |
Rated RPM | 2350 |
Starter volts | 12 |
Oil capacity | 10.5 qts
9.9 L |
Transmission
Transmission — Triple-range
Transmission | Triple-range |
Type | partially synchronized |
Gears | 12 forward and 4 reverse |
Clutch | dry disc |
Four synchronized gears in three ranges, plus reverse range. | |
Dimensions
Deutz-Allis 6265 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 10.00-16. Rear: 18.4-30 |
4WD Standard tires (ag) | Front: 12.4-24. Rear: 18.4-30 |
2WD Optional tires (ag) | Front: 11.00-16. Rear: 16.9-34 |
Dimensions | |
|---|---|
2WD Wheelbase | 91.5 inches
232 cm |
4WD Wheelbase | 94 inches
238 cm |
Width | 82.3 inches
209 cm |
Height (ROPS) | 97.3 inches
247 cm |
Height (cab) | 101.3 inches
257 cm |
Rear tread | 59 to 78.8 inches
149 to 200 cm |
Deutz-Allis 6265 Weight | |
|---|---|
2WD ROPS | 6922 lbs
3139 kg |
4WD ROPS | 7429 lbs
3369 kg |
2WD Cab | 7826 lbs
3549 kg |
4WD Cab | 8333 lbs
3779 kg |
Photos
Deutz-Allis 6265 with 465 front-end loader.
Recommended Implements & Sizing Guide
Engineering recommendations for Deutz Allis Deutz-Allis 6265 based on its 70 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Allis Deutz-Allis 6265.
Estimated Continuous Field Runtime: 6.6 hrs
Approximately 6.6 hours of continuous field operation at ~75% rated power on a full tank (24 gal / 90.8 L).
Estimated 75% Load Fuel Burn~3.6 gal/hr (13.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Deutz Allis Deutz-Allis 6265 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Allis Deutz-Allis 6265.
Converted Equivalents:
Horsepower (HP)70 hp
Kilowatts (kW)52.2 kW
Metric Horsepower (PS / CV)71 PS
Direct Competitor Comparison
Compare Deutz-Allis 6265 against same-era industry alternatives in the same horsepower class.
Current Model
Deutz Allis
Deutz-Allis 6265
Engine Power:Diesel (listed): 70 hp / 52.2 kW
★ Baseline Reference
Related models
Deutz-Allis 6150
- Power:
- 60
Deutz-Allis 6260
- Power:
- 61
- Production years:
- 1986 - 1990
Deutz-Allis 6060
- Power:
- 70.9
- Production years:
- 1985 - 1988
Deutz-Allis 6275
- Power:
- 75
- Production years:
- 1986 - 1990
Deutz-Allis 6070
- Power:
- 78.6
- Production years:
- 1985 - 1988