Deutz-Allis 8010

The Deutz-Allis 8010 is a tractor produced by Deutz Allis. It is equipped with a 301 ci 4.9 L engine. The rated power output is 107.38 hp 80.1 kW. Transmission: Power Shift. Operating weight: 12630 to 13600 pounds.

Overview

	1985 - 1988 Row-Crop tractor
1985 - 1988
Row-Crop tractor

Series map: 80108030119.3hp*148.6hp*8010↓ 1982-1985*Estimated engine power for comparison only.

Note: the Deutz-Allis model 8010 is the same as the Allis Chalmers 8010. The following data is from the 8010 listing.

Production
Manufacturer	Deutz-Allis
Row-Crop tractor
Built in West Allis, Wisconsin, USA
Total built	1,832
Original price	$46,176

Deutz-Allis 8010 Engine
Allis Chalmers 4.9L 6-cyl diesel
Engine details ...

Deutz-Allis 8010 Power
Drawbar (tested)	91.46 hp 68.2 kW
PTO (tested)	107.38 hp 80.1 kW
Performance test details ...

Mechanical
Two- or four-wheel drive
Differential lock	electro-hydraulic rear
Steering	hydrostatic power
Differential hydraulic wet discs brakes
Acousta cab standard with heat and air-conditioning. Optional radio and cassette tape player.

Capacity
Fuel	60 gal 227.1 L
	25 gal (optional tank) 94.6 L
Rear diff.	66.8 qts 63.2 L

Hydraulics
Type	load-sensitive
Valves	2 or 3
Pump flow	22 gpm 83.3 lpm
	13.5 gpm (transmission) 51.1 lpm
Total flow	45 gpm 170.3 lpm
Steering flow	9.5 gpm 36.0 lpm

Tractor hitch
Rear Type	II
Rear lift (at 24"/610mm)	6,680 lbs 3030 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000

Dimensions & Tires
2WD Wheelbase	106 inches 269 cm
4WD Wheelbase	96 inches 243 cm
Weight	12630 to 13600 pounds
Front tire	10.00-16
Rear tire	18.4-38
Full dimensions and tires ...

Electrical
Charging system	alternator
Charging amps	100
Battery volts	12

Engine

Series map: 80108030119.3hp*148.6hp*8010↓ 1982-1985*Estimated engine power for comparison only.

Note: the Deutz-Allis model 8010 is the same as the Allis Chalmers 8010. The following data is from the 8010 listing.

Engine Detail — 301 ci / 4.9 L Diesel

Manufacturer	Allis Chalmers 649T
Configuration	turbocharged diesel, 6-cylinder, liquid-cooled inline
Displacement	301 ci 4.9 L
Bore/Stroke	3.875x4.25 inches 98 x 108 mm
Air cleaner	dry
Compression	15.5:1
Rated RPM	2300
Firing order	1-5-3-6-2-4
Starter volts	12
Oil capacity	16 qts 15.1 L
Coolant capacity	26 qts 24.6 L

Transmission

Series map: 80108030119.3hp*148.6hp*8010↓ 1982-1985*Estimated engine power for comparison only.

Note: the Deutz-Allis model 8010 is the same as the Allis Chalmers 8010. The following data is from the 8010 listing.

Transmission options
16-speed partial power shift
20-speed partial power shift
12-speed Allis-Chalmers

Transmission — Allis-Chalmers Power Director

Transmission	Allis-Chalmers Power Director
Type	partial power shift
Gears	16 forward and 4 reverse
Oil capacity	29.6 qts 28.0 L
Four gears (1-4) in two ranges (slow/fast) with a two-speed power shift (low/high) controlled by left-hand lever.
With 18.4x38 rear tires.

Transmission — Allis-Chalmers Power Director

Transmission	Allis-Chalmers Power Director
Type	partial power shift
Gears	20 forward and 4 reverse
Oil capacity	29.6 qts 28.0 L
Five gears (1-5) in two ranges (slow/fast) with a two-speed power shift (low/high) controlled by left-hand lever.
With 18.4x38 rear tires.

Transmission — Power Shift

Transmission	Power Shift
Type	Allis-Chalmers
Gears	12 forward and 2 reverse
Oil capacity	29.6 qts 28.0 L
Six power shift gears (1-6) in two ranges (slow/fast). Clutch must be used to shift range. Pressing the clutch pedal half-way automatically downshifts from 5th/6th to 4th gear.
With 18.4x38 rear tires.

Dimensions

Series map: 80108030119.3hp*148.6hp*8010↓ 1982-1985*Estimated engine power for comparison only.

Note: the Deutz-Allis model 8010 is the same as the Allis Chalmers 8010. The following data is from the 8010 listing.

Deutz-Allis 8010 Tires
Ag front	10.00-16 (2WD)
	13.6-28 (4WD)
Ag rear	18.4-38
Ag front	11.00-16 (2WD)
	14L-16 (2WD)
	18.4-16 (2WD)
	14.9-28 (4WD)
	14.9-24 (4WD)
Ag rear	20.8-38
	18.4-42
	16.9-38

Dimensions
2WD Wheelbase	106 inches 269 cm
4WD Wheelbase	96 inches 243 cm
Length	187 inches 474 cm
Width	92.6 inches 235 cm
2WD Weight	12,630 lbs 5728 kg
4WD Weight	13,600 lbs 6168 kg
4WD 21 2WD} Clearance (front axle)	17.5 inches 44 cm
Clearance (rear axle)	28 inches 71 cm

Deutz-Allis 8010 Height
Hood	69 inches 175 cm
Cab	114 inches 289 cm
Exhaust	113 inches 287 cm

Tests

Series map: 80108030119.3hp*148.6hp*8010↓ 1982-1985*Estimated engine power for comparison only.

Note: the Deutz-Allis model 8010 is the same as the Allis Chalmers 8010. The following data is from the 8010 listing.

Nebraska Tractor Test 1446
Diesel 12-speed 2WD August 30 - September 10, 1982 Link: Nebraska Tractor Test 1446 file
PTO performance
Power at rated engine speed	107.38 hp 80.1 kW
Fuel use	7.3 gal/hour 27.6 l/hour
Power at rated PTO speed	109.55 hp 81.7 kW
Fuel use	7.3 gal/hour 27.6 l/hour
Drawbar performance
Max power	91.46 hp 68.2 kW
Fuel use	7.3 gal/hour 27.6 l/hour
Gear 2F used for power test.
Max pull	9,102 lbs 4128 kg
Gear 3S used for pull test.

Photos

Deutz-Allis 8010