Deutz-Fahr 4050E
The Deutz-Fahr 4050E is a tractor produced by Deutz Fahr. It is equipped with a 183.1 ci 3.0 L engine. The listed engine power is Diesel (listed): 49.4 hp / 36.8 kW. Transmission: 15 forward and reverse. Operating weight: 5516 to 6504 pounds.
Engine Power
Diesel (listed): 49.4 hp / 36.8 kW
Fuel & Capacities
18.5 gal
70.0 L
Transmission
15 forward and reverse
Operating Weight
5516 to 6504 pounds
Overview
 | 2018 -
4E SeriesUtility tractor |
|---|---|
2018 - | |
4E Series | |
Utility tractor | |
Production | |
|---|---|
Manufacturer | Deutz-Fahr |
Utility tractor | |
Deutz-Fahr 4050E Engine | |
|---|---|
SDF 3.0L 3-cyl diesel | |
Fuel tank | 18.5 gal
70.0 L |
Engine details ...  | |
Deutz-Fahr 4050E Transmission | |
|---|---|
15-speed partially synchronized | |
Transmission details ...  |
Deutz-Fahr 4050E Power | |
|---|---|
Engine | 49.4 hp
36.8 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Differential lock | mechanical |
Power steering | |
Wet disc brakes | |
Open operator station. Cab optional. | |
Hydraulics | |
|---|---|
Type | open center |
Valves | 2 |
Pump flow | 11.1 gpm
42.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift | 5512 lbs
2500 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/540E |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 80.4 inches
204 cm |
4WD Wheelbase | 77.8 inches
197 cm |
Weight | 5516 to 6504 pounds |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
 | |
4050E - 4065E - 4075E - 485E - 4080.4E - 4090.4E - 4100.4E published in 2019, by Deutz-Fahr |
Engine
Engine Detail — 183.1 ci / 3.0 L Diesel
Manufacturer | SDF 1000.3 WT |
Configuration | turbocharged diesel, 3-cylinder, liquid-cooled |
Displacement | 183.1 ci
3.0 L |
Bore/Stroke | 4.13x4.56 inches
105 x 116 mm |
Emissions | Stage IIIA |
Power | 49.4 hp
36.8 kW |
Torque | 157.1 lb-ft
213.0 Nm |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — 15 forward and reverse partially synchronized
Type | partially synchronized |
Gears | 15 forward and reverse |
Five synchronized gears in three ranges with shuttle. | |
Dimensions
Deutz-Fahr 4050E Tires |
|---|
Dimensions | |
|---|---|
2WD Wheelbase | 80.4 inches
204 cm |
4WD Wheelbase | 77.8 inches
197 cm |
Width | 70.2 inches
178 cm |
Deutz-Fahr 4050E Weight | |
|---|---|
2WD Open | 5516 lbs
2502 kg |
4WD Open | 6173 lbs
2800 kg |
2WD Cab | 5842 lbs
2649 kg |
4WD Cab | 6504 lbs
2950 kg |
2WD Max capacity | 8378 lbs
3800 kg |
4WD Max capacity | 10582 lbs
4799 kg |
Photos
Deutz-Fahr 4050E tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Deutz Fahr Deutz-Fahr 4050E based on its 49.4 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | Small Square Baler (14x18")小方捆打捆机 (36x46 cm) | Medium Duty | Classic 2-string baler for horse and small livestock hay. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr 4050E.
Estimated Continuous Field Runtime: 7.2 hrs
Approximately 7.2 hours of continuous field operation at ~75% rated power on a full tank (18.5 gal / 70 L).
Estimated 75% Load Fuel Burn~2.6 gal/hr (9.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Deutz Fahr Deutz-Fahr 4050E Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr 4050E.
Converted Equivalents:
Horsepower (HP)49.4 hp
Kilowatts (kW)36.8 kW
Metric Horsepower (PS / CV)50.1 PS
Direct Competitor Comparison
Compare Deutz-Fahr 4050E against same-era industry alternatives in the same horsepower class.
Current Model
Deutz Fahr
Deutz-Fahr 4050E
Engine Power:Diesel (listed): 49.4 hp / 36.8 kW
★ Baseline Reference
Related models
Deutz-Fahr D 4507
- Power:
- 40
- Production years:
- 1980 - 1990
Deutz-Fahr Agrokid 40
- Power:
- 40.2
- Production years:
- 2003 - 2006
Deutz-Fahr Agrokid 45
- Power:
- 41.6
- Production years:
- 1997 - 2002
Deutz-Fahr Agrokid 220
- Power:
- 42.2
- Production years:
- 2007 - 2017
Deutz-Fahr 4046E Keyline
- Power:
- 44.3
- Production years:
- 2018 - 2026