Deutz-Fahr 8280 TTV

The Deutz-Fahr 8280 TTV is a tractor produced by Deutz Fahr. It is equipped with a 369.7 ci 6.1 L engine. The listed engine power is Diesel (gross): 268 hp / 199.8 kW. Transmission: SDF T7780. Operating weight: 20944 lbs 9500 kg.

Engine Power

Diesel (gross): 268 hp / 199.8 kW

Fuel & Capacities

133.4 gal 504.9 L

Transmission

SDF T7780

Operating Weight

20944 lbs 9500 kg

Overview

	2020 - Row-Crop tractor
2020 -
Row-Crop tractor

Production
Manufacturer	Deutz-Fahr
Row-Crop tractor

Deutz-Fahr 8280 TTV Engine
Deutz 6.1L 6-cyl diesel
Fuel tank	133.4 gal 504.9 L
Exhaust fluid (DEF)	9.3 gal 35.2 L
Engine details ...

Deutz-Fahr 8280 TTV Transmission
continuously-variable transmission
Transmission details ...

Deutz-Fahr 8280 TTV Power
Engine (gross)	268 hp 199.8 kW
Engine (max)	287 hp 214.0 kW

Mechanical
Four-wheel drive
Differential lock	electro-hydraulic front and rear
Power steering
Wet disc brakes
Trailer brakes	hydraulic OptOptional
	pneumatic OptOptional
Cab standard with air-conditioning.

Hydraulics
Type	closed center
Rear valves	4 or 5
Front valves	1 or 2
Steering flow	15.3 gpm 57.9 lpm

Tractor hitch
Rear lift	24471 lbs 11100 kg
Front lift	12015 lbs 5450 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540E/1000/1000E
Front PTO	independent OptOptional
Front PTO Type	1000/1000E

Dimensions & Tires
Wheelbase	114.9 inches 291 cm
Weight	20944 lbs 9500 kg
Front tire	540/65R34
Rear tire	650/85R38
Full dimensions and tires ...

Electrical
Charging system	alternator
Charging amps	200
Charging volts	12
Battery volts	12

References

The New 8280 TTV. published in 2020, by Deutz-Fahr

Engine

Engine Detail — 369.7 ci / 6.1 L Diesel

Manufacturer	Deutz TTCD 6.4 L4
Configuration	turbocharged diesel, 6-cylinder, liquid-cooled
Displacement	369.7 ci 6.1 L
Bore/Stroke	3.98x4.96 inches 101 x 126 mm
Emissions	Stage 5
Rated Power (gross)	268 hp 199.8 kW
Maximum Power (gross)	287 hp 214.0 kW
Cooling system	electronic-viscous fan
Rated RPM	2100
Torque	904 lb-ft 1225.8 Nm
Torque RPM	1500
Starter	electric
Starter volts	12

Deutz-Fahr 8280 TTV Engine

Transmission

Transmission — SDF T7780

Transmission	SDF T7780
Type	continuously-variable transmission
Gears	infinite forward and reverse

Dimensions

Deutz-Fahr 8280 TTV Tires
Standard tires (ag)	Front: 540/65R34. Rear: 650/85R38
Optional tires (ag)	Front: 650/85R38. Rear: 900/60R38

Dimensions
Wheelbase	114.9 inches 291 cm
Length	200.8 inches 510 cm
Width	100.4 inches*Minimum width. 255 cm
Height	129.9 inches 329 cm
Ground clearance	18.9 inches 48 cm

Deutz-Fahr 8280 TTV Weight
	20944 lbs 9500 kg
Max capacity	35274 lbs*Maximum at 60 KPH. 16000 kg
Max front axle	14110 lbs*Maximum at 60 KPH. 6400 kg
Max rear axle	24251 lbs*Maximum at 60 KPH. 11000 kg

Photos

Deutz-Fahr 8280 TTV tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Deutz Fahr Deutz-Fahr 8280 TTV based on its 268 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁	Commercial / Field Scale	High horsepower articulated/4WD field plowing.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙	Commercial / Field Scale	Broad-acre grain tillage for high-drawbar tractors.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr 8280 TTV.

Estimated Continuous Field Runtime: 9.6 hrs

Approximately 9.6 hours of continuous field operation at ~75% rated power on a full tank (133.4 gal / 505 L).

Estimated 75% Load Fuel Burn~13.9 gal/hr (52.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours

Deutz Fahr Deutz-Fahr 8280 TTV Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr 8280 TTV.

Enter value:

Unit:

Converted Equivalents:

Horsepower (HP)268 hp

Kilowatts (kW)199.8 kW

Metric Horsepower (PS / CV)271.7 PS

Direct Competitor Comparison

Compare Deutz-Fahr 8280 TTV against same-era industry alternatives in the same horsepower class.

Current Model

Deutz Fahr