Deutz-Fahr D 6207
The Deutz-Fahr D 6207 is a tractor produced by Deutz Fahr. It is equipped with a 230 ci 3.8 L engine. The listed engine power is Diesel (listed): 60 hp / 44.7 kW. Transmission: TW50.41. Operating weight: 6174 to 6835 pounds.
Engine Power
Diesel (listed): 60 hp / 44.7 kW
Fuel & Capacities
18.5 gal
70.0 L
Transmission
TW50.41
Operating Weight
6174 to 6835 pounds
Overview
 | 1980 - 1984
07 SeriesUtility tractor
07 Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Deutz-Fahr |
Utility tractor | |
Deutz-Fahr D 6207 Engine | |
|---|---|
Deutz 3.8L 4-cyl diesel | |
Fuel tank | 18.5 gal
70.0 L |
Engine details ...  | |
Deutz-Fahr D 6207 Transmission | |
|---|---|
9-speed synchronized | |
Transmission details ...  |
Deutz-Fahr D 6207 Power | |
|---|---|
Engine | 60 hp
44.7 kW |
Drawbar (tested) | 50.75 hp
37.8 kW |
PTO (tested) | 60.23 hp
44.9 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Power steering | |
Disc brakes | |
Four-post ROPS. Cab available with heat. |
Hydraulics | |
|---|---|
Type | open center |
Pump flow | 11.1 gpm
42.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | position and draft control |
Rear lift | 5300 lbs
2404 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Engine RPM | 540@1889 |
1000@1875 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 85.83 inches
218 cm |
Weight | 6174 to 6835 pounds |
Front tire | 7.50-18 |
2WD Rear tire | 13.6-36 |
Full dimensions and tires ...  | |
Engine
Engine Detail — 230 ci / 3.8 L Diesel
Manufacturer | Deutz F4L 912 |
Fuel Type | Diesel |
Configuration | 4-cylinder, air-cooled |
Displacement | 230 ci
3.8 L |
Bore/Stroke | 3.94x4.72 inches
100 x 120 mm |
Power | 60 hp
44.7 kW |
Air cleaner | dry |
Rated RPM | 2050 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — TW50.41
Transmission | TW50.41 |
Type | synchronized |
Gears | 9 forward and 4 reverse |
Clutch | dry dsic |
Dimensions
Deutz-Fahr D 6207 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 7.50-18. Rear: 13.6-36 |
4WD Standard tires (ag) | Front: 10.5-20. Rear: 13.6-36 |
Dimensions | |
|---|---|
Wheelbase | 85.83 inches
218 cm |
Length | 148.03 inches
375 cm |
Height | 97.64 inches
248 cm |
Deutz-Fahr D 6207 Weight | |
|---|---|
6174 lbs (2WD)
2800 kg | |
6835 lbs (4WD)
3100 kg | |
Ballasted | 8780 lbs*Two-wheel drive ROPS with rear iron and fluid plus front iron.
3982 kg |
Tests
Nebraska Tractor Test 1219 | |
|---|---|
Diesel 8-speed 2WD
September 3 - 15, 1976
Link: Nebraska Tractor Test 1219 file | |
PTO performance | |
Power at rated engine speed | 60.23 hp
44.9 kW |
Fuel use | 3.4 gal/hour
12.9 l/hour |
Power at rated PTO speed | 57.00 hp
42.5 kW |
Fuel use | 3.2 gal/hour
12.1 l/hour |
Drawbar performance | |
Max power | 50.75 hp
37.8 kW |
Fuel use | 3.4 gal/hour
12.9 l/hour |
Gear 4L used for power test. | |
Max pull | 6944 lbs
3149 kg |
Gear 2L used for pull test. | |
Photos
Deutz-Fahr D 6207
Recommended Implements & Sizing Guide
Engineering recommendations for Deutz Fahr Deutz-Fahr D 6207 based on its 60 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr D 6207.
Estimated Continuous Field Runtime: 5.9 hrs
Approximately 5.9 hours of continuous field operation at ~75% rated power on a full tank (18.5 gal / 70 L).
Estimated 75% Load Fuel Burn~3.1 gal/hr (11.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Deutz Fahr Deutz-Fahr D 6207 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr D 6207.
Converted Equivalents:
Horsepower (HP)60 hp
Kilowatts (kW)44.7 kW
Metric Horsepower (PS / CV)60.8 PS
Direct Competitor Comparison
Compare Deutz-Fahr D 6207 against same-era industry alternatives in the same horsepower class.
Current Model
Deutz Fahr
Deutz-Fahr D 6207
Engine Power:Diesel (listed): 60 hp / 44.7 kW
★ Baseline Reference
Related models
Deutz-Fahr 4050E
- Power:
- 49.4
- Production years:
- 2018 - 2026
Deutz-Fahr 4050E Keyline
- Power:
- 49.4
- Production years:
- 2018 - 2026
Deutz-Fahr Agrokid 230
- Power:
- 49.6
- Production years:
- 2007 - 2017
Deutz-Fahr Intrac 2002
- Power:
- 50.3
- Production years:
- 1972 - 1974
Deutz-Fahr D 5207
- Power:
- 51
- Production years:
- 1980 - 1984