Erkunt Bereket 60E

The Erkunt Bereket 60E is a tractor produced by Erkunt. It is equipped with a 169.7 ci 2.8 L engine. The listed engine power is Diesel (listed): 56.7 hp / 42.3 kW. Transmission: 12 forward and reverse. Operating weight: 5346 to 6581 pounds.

Engine Power

Diesel (listed): 56.7 hp / 42.3 kW

Fuel & Capacities

18.5 gal 70.0 L

Transmission

12 forward and reverse

Operating Weight

5346 to 6581 pounds

Overview

	2010 - Utility tractor
2010 -
Utility tractor

Production
Manufacturer	Erkunt
Utility tractor
Built in Ankara, Turkey

Erkunt Bereket 60E Engine
Sonalika ITL 2.8L 3-cyl diesel
Fuel tank	18.5 gal 70.0 L
Engine details ...

Erkunt Bereket 60E Transmission
12-speed sync shuttle
Transmission details ...

Erkunt Bereket 60E Power
Engine	56.7 hp 42.3 kW

Mechanical
Two- or four-wheel drive
Two-post folding ROPS. Cab optional.

Hydraulics
Pressure	2756 psi 190.0 bar
Valves	4
Pump flow	5.8 gpm 22.0 lpm

Tractor hitch
Rear lift	4850 lbs 2199 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/540E

Dimensions & Tires
2WD Wheelbase	80.7 inches 204 cm
4WD Wheelbase	84.7 inches 215 cm
Weight	5346 to 6581 pounds
Front tire	7.50-16
4WD Rear tire	12.4/11-36
Full dimensions and tires ...

References

E Series published by Erkunt

Engine

Engine Detail — 169.7 ci / 2.8 L Diesel

Manufacturer	Sonalika ITL 3100-FLT
Configuration	turbocharged intercooled diesel, 3-cylinder, liquid-cooled
Displacement	169.7 ci 2.8 L
Bore/Stroke	3.94x4.65 inches 100 x 118 mm
Emissions	Stage IIIA
Power	56.7 hp 42.3 kW
Rated RPM	2100
Torque	169.6 lb-ft 230.0 Nm
Torque RPM	1300
Starter type	electric

Transmission

Transmission — 12 forward and reverse sync shuttle

Type	sync shuttle
Gears	12 forward and reverse

Dimensions

Erkunt Bereket 60E Tires
4WD Standard tires (ag)	Front: 7.50-16. Rear: 12.4/11-36
4WD Standard tires (ag)	Front: 280/70R20. Rear: 13.6-28
4WD Standard tires (ag)	Front: 9.5R24. Rear: 12.4/11-36

Dimensions
2WD Wheelbase	80.7 inches 204 cm
4WD Wheelbase	84.7 inches 215 cm
2WD Length	152.4 inches 387 cm
4WD Length	156.3 inches 397 cm
Width	73.2 inches 185 cm
Height (ROPS)	104.9 inches 266 cm
Height (cab)	102.5 inches 260 cm

Erkunt Bereket 60E Weight
2WD ROPS	5346 lbs 2424 kg
4WD ROPS	5919 lbs 2684 kg
2WD Cab	6008 lbs 2725 kg
4WD Cab	6581 lbs 2985 kg

Photos

Erkunt Bereket 60E tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Erkunt Bereket 60E based on its 56.7 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	Small Square Baler (14x18")小方捆打捆机 (36x46 cm)	Medium Duty	Classic 2-string baler for horse and small livestock hay.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Erkunt Bereket 60E.

Estimated Continuous Field Runtime: 6.3 hrs

Approximately 6.3 hours of continuous field operation at ~75% rated power on a full tank (18.5 gal / 70 L).

Estimated 75% Load Fuel Burn~2.9 gal/hr (11.2 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours