Erkunt Kismet 55E Bahce

The Erkunt Kismet 55E Bahce is a tractor produced by Erkunt. It is equipped with a 169.7 ci 2.8 L engine. The listed engine power is Diesel (listed): 56.7 hp / 42.3 kW. Transmission: 8 forward and reverse. Operating weight: 4630 to 5027 pounds.

Engine Power

Diesel (listed): 56.7 hp / 42.3 kW

Fuel & Capacities

10.6 gal 40.1 L

Transmission

8 forward and reverse

Operating Weight

4630 to 5027 pounds

Overview

	2010 - Orchard/Vineyard tractor
2010 -
Orchard/Vineyard tractor

Production
Manufacturer	Erkunt
Orchard/Vineyard tractor
Built in Ankara, Turkey

Erkunt Kismet 55E Bahce Engine
Sonalika ITL 2.8L 3-cyl diesel
Fuel tank	10.6 gal 40.1 L
Engine details ...

Erkunt Kismet 55E Bahce Transmission
8-speed mechanical shuttle
Transmission details ...

Erkunt Kismet 55E Bahce Power
Engine	56.7 hp 42.3 kW

Mechanical
Two- or four-wheel drive
Two-post mid-mount ROPS.

Hydraulics
Pressure	2756 psi 190.0 bar
Valves	4
Pump flow	6.6 gpm 25.0 lpm

Tractor hitch
Rear lift	4850 lbs 2199 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/540E

Dimensions & Tires
Weight	4630 to 5027 pounds
Front tire	6.50-16
2WD Rear tire	13.6-28
Full dimensions and tires ...

References

Kismet Garden Series published by Erkunt

Engine

Engine Detail — 169.7 ci / 2.8 L Diesel

Manufacturer	Sonalika ITL 3100-FLT
Configuration	turbocharged intercooled diesel, 3-cylinder, liquid-cooled
Displacement	169.7 ci 2.8 L
Bore/Stroke	3.94x4.65 inches 100 x 118 mm
Emissions	Stage IIIA
Power	56.7 hp 42.3 kW
Rated RPM	2100
Torque	169.6 lb-ft 230.0 Nm
Torque RPM	1300
Starter type	electric

Transmission

Transmission — 8 forward and reverse mechanical shuttle

Type	mechanical shuttle
Gears	8 forward and reverse
Four gears in two ranges with left-hand shuttle.

Dimensions

Erkunt Kismet 55E Bahce Tires
2WD Standard tires (ag)	Front: 6.50-16. Rear: 13.6-28
2WD Standard tires (ag)	Front: 6.00-16. Rear: 380/70R28
4WD Standard tires (ag)	Front: 280/70R16. Rear: 360/70R24

Dimensions
2WD Weight	4630 lbs 2100 kg
4WD Weight	5027 lbs 2280 kg
2WD Front tread	39.2 inches 99 cm
4WD Front tread	44.7 inches 113 cm
Rear tread	44.9 inches 114 cm

Photos

Erkunt Kismet 55E Bahce tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Erkunt Kismet 55E Bahce based on its 56.7 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	Small Square Baler (14x18")小方捆打捆机 (36x46 cm)	Medium Duty	Classic 2-string baler for horse and small livestock hay.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Erkunt Kismet 55E Bahce.

Estimated Continuous Field Runtime: 3.6 hrs

Approximately 3.6 hours of continuous field operation at ~75% rated power on a full tank (10.6 gal / 40.1 L).

Estimated 75% Load Fuel Burn~2.9 gal/hr (11.2 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours