Erkunt Kismet 55E

The Erkunt Kismet 55E is a tractor produced by Erkunt. It is equipped with a 169.7 ci 2.8 L engine. The listed engine power is Diesel (listed): 56.7 hp / 42.3 kW. Transmission: 8 forward and reverse. Operating weight: 4630 to 5027 pounds.

Engine Power

Diesel (listed): 56.7 hp / 42.3 kW

Fuel & Capacities

14.5 gal 54.9 L

Transmission

8 forward and reverse

Operating Weight

4630 to 5027 pounds

Overview

	2010 - Utility tractor
2010 -
Utility tractor

Production
Manufacturer	Erkunt
Utility tractor
Built in Ankara, Turkey

Erkunt Kismet 55E Engine
Sonalika ITL 2.8L 3-cyl diesel
Fuel tank	14.5 gal 54.9 L
Engine details ...

Erkunt Kismet 55E Transmission
8-speed mechanical shuttle
Transmission details ...

Erkunt Kismet 55E Power
Engine	56.7 hp 42.3 kW

Mechanical
Two- or four-wheel drive
Two-post folding ROPS.

Hydraulics
Pressure	2756 psi 190.0 bar
Valves	2
Pump flow	7.1 gpm 26.9 lpm

Tractor hitch
Rear lift	4850 lbs 2199 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540

Dimensions & Tires
2WD Wheelbase	76.7 inches 194 cm
4WD Wheelbase	81.1 inches 205 cm
Weight	4630 to 5027 pounds
Front tire	5.50-16
2WD Rear tire	13.6-24
Full dimensions and tires ...

References

Kismet Field Series published by Erkunt

Engine

Engine Detail — 169.7 ci / 2.8 L Diesel

Manufacturer	Sonalika ITL 3100-FLT
Configuration	turbocharged intercooled diesel, 3-cylinder, liquid-cooled
Displacement	169.7 ci 2.8 L
Bore/Stroke	3.94x4.65 inches 100 x 118 mm
Emissions	Stage IIIA
Power	56.7 hp 42.3 kW
Rated RPM	2100
Torque	169.6 lb-ft 230.0 Nm
Torque RPM	1300
Starter type	electric

Transmission

Transmission — 8 forward and reverse mechanical shuttle

Type	mechanical shuttle
Gears	8 forward and reverse
Four gears in two ranges with left-hand shuttle.

Dimensions

Erkunt Kismet 55E Tires
2WD Standard tires (ag)	Front: 5.50-16. Rear: 13.6-24
4WD Standard tires (ag)	Front: 280/70R18. Rear: 380/85R28
4WD Standard tires (ag)	Front: 280/70R16. Rear: 12.4-28
4WD Standard tires (ag)	Front: 280/70R16. Rear: 13.6x28

Dimensions
2WD Wheelbase	76.7 inches 194 cm
4WD Wheelbase	81.1 inches 205 cm
2WD Length	139.6 inches 354 cm
4WD Length	142.4 inches 361 cm
Width	68.7 inches 174 cm
2WD Height (ROPS)	88.3 inches 224 cm
4WD Height (ROPS)	91.3 inches 231 cm
2WD Weight	4630 lbs 2100 kg
4WD Weight	5027 lbs 2280 kg

Photos

Erkunt Kismet 55E tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Erkunt Kismet 55E based on its 56.7 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	Small Square Baler (14x18")小方捆打捆机 (36x46 cm)	Medium Duty	Classic 2-string baler for horse and small livestock hay.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Erkunt Kismet 55E.

Estimated Continuous Field Runtime: 4.9 hrs

Approximately 4.9 hours of continuous field operation at ~75% rated power on a full tank (14.5 gal / 54.9 L).

Estimated 75% Load Fuel Burn~2.9 gal/hr (11.2 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours