Erkunt Kiymet 95M

The Erkunt Kiymet 95M is a tractor produced by Erkunt. It is equipped with a 268.5 ci 4.4 L engine. The listed engine power is Diesel (listed): 91.2 hp / 68.0 kW. Transmission: 16 forward and reverse. Operating weight: 6702 lbs 3040 kg.

Engine Power

Diesel (listed): 91.2 hp / 68.0 kW

Fuel & Capacities

18.5 gal 70.0 L

Transmission

16 forward and reverse

Operating Weight

6702 lbs 3040 kg

Overview

	2010 - Orchard/Vineyard tractor
2010 -
Orchard/Vineyard tractor

Production
Manufacturer	Erkunt
Orchard/Vineyard tractor
Built in Ankara, Turkey

Erkunt Kiymet 95M Engine
Perkins 4.4L 4-cyl diesel
Fuel tank	18.5 gal 70.0 L
Engine details ...

Erkunt Kiymet 95M Transmission
16-speed power shuttle
Transmission details ...

Erkunt Kiymet 95M Power
Engine	91.2 hp 68.0 kW

Mechanical
Four-wheel drive
Two-post mid-mount ROPS.

Hydraulics
Pressure	2611 psi 180.0 bar
Valves	6
Pump flow	14.5 gpm 54.9 lpm

Tractor hitch
Rear lift	7055 lbs 3200 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	430/540/540E/1000

Dimensions & Tires
Wheelbase	89.8 inches 228 cm
Weight	6702 lbs 3040 kg
Front tire	280/70R18
4WD Rear tire	380/70R28
Full dimensions and tires ...

References

Orchard published by Erkunt

Engine

Engine Detail — 268.5 ci / 4.4 L Diesel

Manufacturer	Perkins 1104D-44T
Configuration	turbocharged intercooled diesel, 4-cylinder, liquid-cooled
Displacement	268.5 ci 4.4 L
Bore/Stroke	4.13x5.00 inches 105 x 127 mm
Emissions	Stage IIIA
Power	91.2 hp 68.0 kW
Rated RPM	2200
Torque	287.7 lb-ft 390.1 Nm
Torque RPM	1400
Starter type	electric

Transmission

Transmission — 16 forward and reverse power shuttle

Type	power shuttle
Gears	16 forward and reverse

Dimensions

Erkunt Kiymet 95M Tires
4WD Standard tires (ag)	Front: 280/70R18. Rear: 380/70R28
4WD Standard tires (ag)	Front: 260/70R16. Rear: 380/70R24

Dimensions
Wheelbase	89.8 inches 228 cm
Length	163 inches 414 cm
Width	66.1 inches 167 cm
Height (ROPS)	61 inches 154 cm
Weight	6702 lbs 3040 kg
Front tread	53.2 inches 135 cm
Rear tread	51.2 inches 130 cm

Photos

Erkunt Kiymet 95M tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Erkunt Kiymet 95M based on its 91.2 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Erkunt Kiymet 95M.

Estimated Continuous Field Runtime: 3.9 hrs

Approximately 3.9 hours of continuous field operation at ~75% rated power on a full tank (18.5 gal / 70 L).

Estimated 75% Load Fuel Burn~4.7 gal/hr (18 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours