Fahr D30L
The Fahr D30L is a tractor produced by Fahr. It is equipped with a 162.3 ci 2.7 L engine. The listed engine power is Diesel (listed): 30 hp / 22.4 kW. Transmission: Fahr F12N.
Engine Power
Diesel (listed): 30 hp / 22.4 kW
Fuel & Capacities
Diesel
Transmission
Fahr F12N
Overview
 | 1951 - 1953 |
|---|
Production | |
|---|---|
Manufacturer | Fahr |
Total built | 1042 |
Fahr D30L Engine | |
|---|---|
Deutz 2.7L 2-cyl diesel | |
Engine details ...  |
Fahr D30L Transmission | |
|---|---|
5-speed gear | |
Transmission details ...  |
Fahr D30L Power | |
|---|---|
Engine | 30 hp
22.4 kW |
Mechanical | |
|---|---|
Two-wheel drive | |
Manual steering | |
Open operator station. |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 |
Dimensions & Tires | |
|---|---|
Wheelbase | 72.6 inches
184 cm |
Full dimensions and tires ...  | |
Engine
Engine Detail — 162.3 ci / 2.7 L Diesel
Manufacturer | Deutz F2L514 |
Fuel Type | Diesel |
Configuration | 2-cylinder, air-cooled |
Displacement | 162.3 ci
2.7 L |
Bore/Stroke | 4.33x5.51 inches
110 x 140 mm |
Power | 30 hp
22.4 kW |
Transmission
Transmission — Fahr F12N
Transmission | Fahr F12N |
Type | gear |
Gears | 5 forward and 1 reverse |
Dimensions
Fahr D30L Tires |
|---|
Dimensions | |
|---|---|
Wheelbase | 72.6 inches
184 cm |
Length | 117.7 inches
298 cm |
Width | 62.5 inches
158 cm |
Height | 70.1 inches
178 cm |
Recommended Implements & Sizing Guide
Engineering recommendations for Fahr D30L based on its 30 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Fahr D30L.
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Fahr D30L Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Fahr D30L.
Converted Equivalents:
Horsepower (HP)30 hp
Kilowatts (kW)22.4 kW
Metric Horsepower (PS / CV)30.4 PS
Direct Competitor Comparison
Compare Fahr D30L against same-era industry alternatives in the same horsepower class.
Current Model
Fahr
Fahr D30L
Engine Power:Diesel (listed): 30 hp / 22.4 kW
★ Baseline Reference
Related models
Fahr D180H
- Power:
- 24
- Production years:
- 1954 - 1959
Fahr D181
- Power:
- 24
- Production years:
- 1955 - 1958
Fahr D133N
- Power:
- 25
- Production years:
- 1959 - 1961
Fahr D133T
- Power:
- 25
- Production years:
- 1959 - 1961
Fahr D22
- Power:
- 25
- Production years:
- 1949 - 1951