Farmtrac 775DTC
The Farmtrac 775DTC is a tractor produced by Farmtrac. It is equipped with a 244 ci 4.0 L engine. The listed engine power is Diesel (listed): 75 hp / 55.9 kW. Transmission: shuttle. Operating weight: 6,829 lbs 3097 kg.
Engine Power
Diesel (listed): 75 hp / 55.9 kW
Fuel & Capacities
17.2 gal
65.1 L
Transmission
shuttle
Operating Weight
6,829 lbs
3097 kg
Overview
 | 2006 - 2008
7 SeriesFarm/Agricultural tractorSAME built
7 Series
Farm/Agricultural tractor
SAME built |
|---|
Production | |
|---|---|
Distributor | Farmtrac |
Manufacturer | SAME |
Farm/Agricultural tractor | |
Built in Italy | |
Farmtrac 775DTC Engine | |
|---|---|
Deutz-Fahr 4.0L 4-cyl diesel | |
Fuel tank | 17.2 gal
65.1 L |
Engine details ...  | |
Farmtrac 775DTC Transmission | |
|---|---|
15-speed | |
Transmission details ...  |
Farmtrac 775DTC Power | |
|---|---|
Engine | 75 hp
55.9 kW |
PTO (claimed) | 66 hp
49.2 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Steering | hydrostatic power |
Hydraulic wet disc brakes | |
ROPS | |
Hydraulics | |
|---|---|
Valves | 2 |
Pump flow | 14.3 gpm
54.1 lpm |
Total flow | 19.8 gpm
74.9 lpm |
Steering flow | 5.5 gpm
20.8 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift (at ends) | 6,476 lbs
2937 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Weight | 6,829 lbs
3097 kg |
Front tire | 12.4x24 |
Rear tire | 16.9x30 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Charging system | alternator |
Charging amps | 65 |
Battery CCA | 800 |
Battery volts | 12 |
Engine
Engine Detail — 244 ci / 4.0 L Diesel
Manufacturer | Deutz-Fahr |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 244 ci
4.0 L |
Power | 75 hp
55.9 kW |
Air cleaner | dry |
Starter volts | 12 |
Transmission
Transmission — shuttle
Transmission | shuttle |
Gears | 15 forward and reverse |
Dimensions
Farmtrac 775DTC Tires | |
|---|---|
Ag front | 12.4x24 |
Ag rear | 16.9x30 |
Ag front | 13.6x24 |
Ag rear | 18.4x30 |
Dimensions | |
|---|---|
Length | 158 inches
401 cm |
Width | 76 inches
193 cm |
Height | 93 inches
236 cm |
Operating weight | 6,829 lbs
3097 kg |
Photos
Farmtrac 775DTC tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Farmtrac 775DTC based on its 75 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Farmtrac 775DTC.
Estimated Continuous Field Runtime: 4.4 hrs
Approximately 4.4 hours of continuous field operation at ~75% rated power on a full tank (17.2 gal / 65.1 L).
Estimated 75% Load Fuel Burn~3.9 gal/hr (14.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Farmtrac 775DTC Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Farmtrac 775DTC.
Converted Equivalents:
Horsepower (HP)75 hp
Kilowatts (kW)55.9 kW
Metric Horsepower (PS / CV)76 PS
Direct Competitor Comparison
Compare Farmtrac 775DTC against same-era industry alternatives in the same horsepower class.
Current Model
Farmtrac
Farmtrac 775DTC
Engine Power:Diesel (listed): 75 hp / 55.9 kW
★ Baseline Reference
Related models
Farmtrac 665
- Power:
- 60
- Production years:
- 2005 - 2008
Farmtrac 70
- Power:
- 60
- Production years:
- 2002 - 2003
Farmtrac 8060
- Power:
- 60
- Production years:
- 2007 - 2017
Farmtrac 680
- Power:
- 68
Farmtrac 675
- Power:
- 72.4
- Production years:
- 2002 - 2008