Fendt 380GTA

The Fendt 380GTA is a tractor produced by Fendt. It is equipped with a 249.3 ci 4.1 L engine. The listed engine power is Diesel (listed): 93.7 hp / 69.9 kW. Transmission: 21 forward and 6 reverse. Operating weight: 8774 lbs 3979 kg.

Engine Power
Diesel (listed): 93.7 hp / 69.9 kW
Fuel & Capacities
21.1 gal 79.9 L
Transmission
21 forward and 6 reverse
Operating Weight
8774 lbs 3979 kg

Overview

Fendt 380GTA tractor photo
1998 - 2004 Allrad-GT SeriesTool Carrier tractor Allrad-GT Series Tool Carrier tractor
Production
Manufacturer
Fendt
Tool Carrier tractor
Variants
380GTA
standard chassis
380GHA
high-crop chassis
Fendt 380GTA Engine
KHD 4.1L 4-cyl diesel
Fuel tank
21.1 gal 79.9 L
Engine details ...
Fendt 380GTA Transmission
21-speed
Transmission details ...
Fendt 380GTA Power
Engine
93.7 hp 69.9 kW
Mechanical
Four-wheel drive
Power steering
Hydraulic disc brakes
Cab standard with heater.
Hydraulics
Pump flow
10.6 gpm 40.1 lpm
Total flow
18 gpm 68.1 lpm
Steering flow
7.4 gpm 28.0 lpm
Tractor hitch
Rear Type
II
Rear lift
9656 lbs 4379 kg
Front Hitch
II
Front lift
4811 lbs 2182 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540/750
540/1000
Front PTO
independent
Front PTO Type
1000
Dimensions & Tires
Wheelbase
98.4 inches 249 cm
Weight
8774 lbs 3979 kg
Front tire
12.4R24
Rear tire
16.9R34
Full dimensions and tires ...
Electrical
Charging system
alternator
Charging amps
55
Charging volts
14
Battery AH
110

Engine

Engine Detail — 249.3 ci / 4.1 L Diesel

Manufacturer
KHD
Configuration
turbocharged diesel, 4-cylinder, air-cooled
Displacement
249.3 ci 4.1 L
Bore/Stroke
4.02x4.92 inches 102 x 125 mm
Power
93.7 hp 69.9 kW
Rated RPM
2400
Torque
256.7 lb-ft 348.1 Nm
Torque RPM
1500

Transmission

Transmission — 21 forward and 6 reverse

Gears
21 forward and 6 reverse
Three gears (1-3) plus reverse (R) in two ranges with three-speed electric shift. An additional three overdrive speeds are available on the gear shift.

Dimensions

Fendt 380GTA Tires
Standard tires (ag)
Front: 12.4R24. Rear: 16.9R34
Optional tires (ag)
Front: 12.4R24. Rear: 13.6R38
Dimensions
Wheelbase
98.4 inches 249 cm
Length
167.3 inches 424 cm
Width
76.8 inches 195 cm
Height
103.2 inches 262 cm
Shipping weight
8774 lbs 3979 kg
Max weight
15432 lbs 6999 kg
Ground clearance
18.1 inches 45 cm
Front tread
61.8 to 70.9 inches 156 to 180 cm
Rear tread
65.4 to 78.7 inches 166 to 199 cm

Attachments

Attachment overview
Fendt 3 loader
Fendt 3S loader

Photos

Fendt 380GTA tractor photo

Fendt 380GTA tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Fendt 380GTA based on its 93.7 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)Heavy DutyHeavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing
7 to 8 ft (84-96 in)2.1 - 2.4 mHeavy DutyHeavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep
78 to 84 in200 - 215 cmHeavy DutyHeavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage
10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙Heavy DutyAggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage
4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机Heavy DutySilage and dry hay; 540 RPM PTO with slip-clutch.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Fendt 380GTA.

Estimated Continuous Field Runtime: 4.3 hrs

Approximately 4.3 hours of continuous field operation at ~75% rated power on a full tank (21.1 gal / 79.9 L).

Estimated 75% Load Fuel Burn~4.9 gal/hr (18.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Fendt 380GTA Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Fendt 380GTA.

Converted Equivalents:

Horsepower (HP)93.7 hp
Kilowatts (kW)69.9 kW
Metric Horsepower (PS / CV)95 PS

Direct Competitor Comparison

Compare Fendt 380GTA against same-era industry alternatives in the same horsepower class.

Current Model
Fendt

Fendt 380GTA

Engine Power:Diesel (listed): 93.7 hp / 69.9 kW
★ Baseline Reference
DeereMarket Competitor

Deere 2541

Engine Power:84.5
Production Years:1982 - 1987
CaseIHMarket Competitor

CaseIH JXU 85

Engine Power:84.5
Production Years:2008 - 2012
KubotaMarket Competitor

Kubota M8540

Engine Power:84.6
Production Years:2007 - 2013
Deutz-FahrMarket Competitor

Deutz-Fahr Intrac 2005

Engine Power:84.8
Production Years:1974 - 1975