Fendt Favorit 610SL

The Fendt Favorit 610SL is a tractor produced by Fendt. It is equipped with a 380.8 ci 6.2 L engine. The listed engine power is Diesel (listed): 90 hp / 67.1 kW. Transmission: 16 forward and 7 reverse. Operating weight: 10,517 lbs (2WD) 4770 kg.

Engine Power

Diesel (listed): 90 hp / 67.1 kW

Fuel & Capacities

58.7 gal 222.2 L

Transmission

16 forward and 7 reverse

Operating Weight

10,517 lbs (2WD) 4770 kg

Overview

	1976 - 1979 Favorit 600 SL Series

Production
Manufacturer	Fendt

Fendt Favorit 610SL Engine
MWM 6.2L 6-cyl diesel
Fuel tank	58.7 gal 222.2 L
Engine details ...

Fendt Favorit 610SL Power
Engine	90 hp 67.1 kW

Mechanical
Two- or four-wheel drive

Hydraulics
Pump flow	11.6 gpm 43.9 lpm

Tractor hitch
Rear lift	9922 lbs 4500 kg

Power Take-off (PTO)
Rear PTO Type	540, 1000

Dimensions & Tires
Wheelbase	107.09 inches 272 cm
Weight	10517 to 11355 pounds
Front tire	7.50-20
Rear tire	18.4-34
Full dimensions and tires ...

Engine

Engine Detail — 380.8 ci / 6.2 L Diesel

Manufacturer	MWM D226-6
Fuel Type	Diesel
Configuration	6-cylinder, liquid-cooled
Displacement	380.8 ci 6.2 L
Bore/Stroke	4.1338x4.72 inches 105 x 120 mm
Power	90 hp 67.1 kW
Rated RPM	2270
Torque	235.3 lb-ft 319.1 Nm
Torque RPM	1550

Transmission

Transmission options
12-speed
16-speed

Transmission — 12 forward and 6 reverse

Gears

12 forward and 6 reverse

Transmission — 16 forward and 7 reverse

Gears

16 forward and 7 reverse

Dimensions

Fendt Favorit 610SL Tires
Ag front	7.50-20
	11.2-28 (4WD)
Ag rear	18.4-34

Dimensions
Wheelbase	107.09 inches 272 cm
Length	182.68 inches 464 cm
Height	107.09 inches 272 cm
Weight	10,517 lbs (2WD) 4770 kg
	11,355 lbs (4WD) 5150 kg

Photos

Fendt Favorit 610SL tractor.

Recommended Implements & Sizing Guide

Engineering recommendations for Fendt Favorit 610SL based on its 90 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Fendt Favorit 610SL.

Estimated Continuous Field Runtime: 12.5 hrs

Approximately 12.5 hours of continuous field operation at ~75% rated power on a full tank (58.7 gal / 222.2 L).

Estimated 75% Load Fuel Burn~4.7 gal/hr (17.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours