Fiat 980
The Fiat 980 is a tractor produced by Fiat. It is equipped with a 316.21 ci 5.2 L engine. The listed engine power is Diesel (listed): 98 hp / 73.1 kW. Transmission: 16 forward and 4 reverse. Operating weight: 7628 to 8289 pounds.
Engine Power
Diesel (listed): 98 hp / 73.1 kW
Fuel & Capacities
30.6 gal
115.8 L
Transmission
16 forward and 4 reverse
Operating Weight
7628 to 8289 pounds
Overview
![]() | 1979 - 1984 |
|---|
Production | |
|---|---|
Manufacturer | Fiat |
Fiat 980 Engine | |
|---|---|
Fiat 5.2L 6-cyl diesel | |
Fuel tank | 30.6 gal
115.8 L |
Engine details ... | |
Fiat 980 Power | |
|---|---|
Engine | 98 hp
73.1 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Power steering | |
Wet disc brakes | |
Open operator station. ROPS and cab available. |
Hydraulics | |
|---|---|
Type | open center |
Pump flow | 10.9 gpm
41.3 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | position and draft control |
Rear lift | 7056 lbs
3200 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 (1.375) |
Engine RPM | 540@2124 |
1000@2400 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 100 inches
254 cm |
Weight | 7628 to 8289 pounds |
Front tire | 7.50-20 |
2WD 12.4/11-28:16.9/14-38 4WD} Rear tire | 16.9/14-38 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Charging system | alternator |
Battery volts | 12 |
Engine
Engine Detail — 316.21 ci / 5.2 L Diesel
Manufacturer | Fiat 8065 |
Fuel Type | Diesel |
Configuration | 6-cylinder, liquid-cooled |
Displacement | 316.21 ci
5.2 L |
Bore/Stroke | 3.937x4.33 inches
100 x 110 mm |
Power | 98 hp
73.1 kW |
Air cleaner | oil bath |
Compression | 17:1 |
Rated RPM | 2400 |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
12-speed synchronized | |
16-speed creeper |
Transmission — 12 forward and 3 reverse synchronized
Type | synchronized |
Gears | 12 forward and 3 reverse |
Clutch | dry disc |
Transmission | |
Type | creeper |
Gears | 16 forward and 4 reverse |
Dimensions
Fiat 980 Tires | |
|---|---|
2WD 12.4/11-28 Standard tires (ag) | Front: 7.50-20. Rear: 16.9/14-38 |
Dimensions | |
|---|---|
Wheelbase | 100 inches
254 cm |
Length | 157.5 inches
400 cm |
Height | 104.3 inches
264 cm |
2WD Weight | 7628 lbs
3460 kg |
4WD Weight | 8289 lbs
3759 kg |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Fiat 980 based on its 98 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Fiat 980.
Estimated Continuous Field Runtime: 6 hrs
Approximately 6 hours of continuous field operation at ~75% rated power on a full tank (30.6 gal / 115.8 L).
Estimated 75% Load Fuel Burn~5.1 gal/hr (19.3 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Fiat 980 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Fiat 980.
Converted Equivalents:
Horsepower (HP)98 hp
Kilowatts (kW)73.1 kW
Metric Horsepower (PS / CV)99.4 PS
Direct Competitor Comparison
Compare Fiat 980 against same-era industry alternatives in the same horsepower class.
Current Model
Fiat
Fiat 980
Engine Power:Diesel (listed): 98 hp / 73.1 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 766
Engine Power:88.6
Production Years:1971 - 1976
Related models
Fiat 80-65
- Power:
- 78.9
- Production years:
- 1985 - 1989
Fiat 80-66S
- Power:
- 78.9
- Production years:
- 1992 - 1996
Fiat 80-75
- Power:
- 78.9
- Production years:
- 1989 - 1992
Fiat 80-76
- Power:
- 78.9
- Production years:
- 1990 - 1992
Fiat 80-88
- Power:
- 78.9
- Production years:
- 1990 - 1995


