Hinomoto Hotshot E230

The Hinomoto Hotshot E230 is a tractor produced by Hinomoto. It is equipped with a 77.1 ci 1.3 L engine. The listed engine power is Diesel (listed): 22.7 hp / 16.9 kW. Transmission: 12 forward and 3 reverse. Operating weight: 1868 lbs 847 kg.

Engine Power

Diesel (listed): 22.7 hp / 16.9 kW

Fuel & Capacities

7.1 gal 26.9 L

Transmission

12 forward and 3 reverse

Operating Weight

1868 lbs 847 kg

Overview

	1979 - 1982 E100 SeriesCompact Utility tractor E100 Series Compact Utility tractor

Production
Manufacturer	Hinomoto
Compact Utility tractor
Built in Japan

Variants
5020	similar Allis Chalmers model
9523	similar Simplicity model

Hinomoto E230 Engine
Toyosha 1.3L 2-cyl diesel
Fuel tank	7.1 gal 26.9 L
Engine details ...

Hinomoto E230 Transmission
12-speed gear
Transmission details ...

Hinomoto E230 Power
Engine	22.7 hp 16.9 kW

Mechanical
Two-wheel drive
Manual steering
Open operator station.

Hydraulics
Type	open center
Pressure	1700 psi 117.2 bar
Pump flow	5.44 gpm 20.6 lpm

Tractor hitch
Rear Type	I
Control	position control
Rear lift (at ends)	1467 lbs 665 kg

Power Take-off (PTO)
Rear PTO	transmssion
Rear PTO Type	540 (1.375)

Dimensions & Tires
Wheelbase	60 inches 152 cm
Weight	1868 lbs 847 kg
Front tire	4.00-15
Rear tire	11.2/10-24
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

Red Book 1979 published by Implement & Tractor
E230 - E280 published in 1979, by Hinomoto

Engine

Engine Detail — 77.1 ci / 1.3 L Diesel

Manufacturer	Toyosha P-126
Fuel Type	Diesel
Configuration	2-cylinder, liquid-cooled
Displacement	77.1 ci 1.3 L
Bore/Stroke	3.62x3.74 inches 92 x 95 mm
Power	22.7 hp 16.9 kW
Fuel system	indirect injection
Air cleaner	dry
Pre-heating	glow plugs
Compression	23:1
Rated RPM	2500
Starter	electric
Starter volts	12
Oil capacity	4.2 qts 4.0 L
Coolant capacity	6.6 qts 6.2 L

Transmission

Transmission — 12 forward and 3 reverse gear

Type	gear
Gears	12 forward and 3 reverse
Oil capacity	22 qts 20.8 L
Four gears, plus reverse, in three ranges.

Dimensions

Hinomoto E230 Tires
Standard tires (ag)	Front: 4.00-15. Rear: 11.2/10-24
Lawn/turf front	20x8.00-10
Lawn/turf rear	13.6-16

Dimensions
Wheelbase	60 inches 152 cm
Length	107.9 inches 274 cm
Width	50 inches 127 cm
Height (steering wheel)	53.1 inches 134 cm
Height (exhaust)	77 inches 195 cm
Weight	1868 lbs 847 kg
Flange rear axle
Front tread	37.4 inches 94 cm
Rear tread	39.2 to 51 inches 99 to 129 cm

Photos

Hinomoto Hotshot E230

Hinomoto E230 operator station and controls.

Recommended Implements & Sizing Guide

Engineering recommendations for Hinomoto Hotshot E230 based on its 22.7 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	4 ft (48 in)1.2 m	Light Duty	Pasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep	42 to 48 in105 - 120 cm	Light Duty	Covers compact tractor tire width.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Hinomoto Hotshot E230.

Estimated Continuous Field Runtime: 6 hrs

Approximately 6 hours of continuous field operation at ~75% rated power on a full tank (7.1 gal / 26.9 L).

Estimated 75% Load Fuel Burn~1.2 gal/hr (4.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours