Hinomoto Hombre E280

The Hinomoto Hombre E280 is a tractor produced by Hinomoto. It is equipped with a 90.1 ci 1.5 L engine. The listed engine power is Diesel (listed): 27.6 hp / 20.6 kW. Transmission: 12 forward and 3 reverse. Operating weight: 2233 lbs 1012 kg.

Engine Power

Diesel (listed): 27.6 hp / 20.6 kW

Fuel & Capacities

7.1 gal 26.9 L

Transmission

12 forward and 3 reverse

Operating Weight

2233 lbs 1012 kg

Overview

	1979 - 1982 E100 SeriesCompact Utility tractor E100 Series Compact Utility tractor

Production
Manufacturer	Hinomoto
Compact Utility tractor
Built in Japan

Variants
5030	similar Allis Chalmers model
9528	similar Simplicity model

Hinomoto E280 Engine
Toyosha 1.5L 2-cyl diesel
Fuel tank	7.1 gal 26.9 L
Engine details ...

Hinomoto E280 Transmission
12-speed gear
Transmission details ...

Hinomoto E280 Power
Engine	27.6 hp 20.6 kW

Mechanical
Two-wheel drive
Differential lock	mechanical rear
Manual steering
Open operator station.

Hydraulics
Type	open center
Pressure	1700 psi 117.2 bar
Pump flow	5.44 gpm 20.6 lpm

Tractor hitch
Rear Type	I
Control	position control with optional draft control
Rear lift (at ends)	1594 lbs 723 kg

Power Take-off (PTO)
Rear PTO	transmssion
Rear PTO Type	540 (1.375)
Front PTO	independent OptOptional
Clutch	electric

Dimensions & Tires
Wheelbase	61.6 inches 156 cm
Weight	2233 lbs 1012 kg
Front tire	5.00-15
Rear tire	12.4-24
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

Red Book 1979 published by Implement & Tractor
E230 - E280 published in 1979, by Hinomoto

Engine

Engine Detail — 90.1 ci / 1.5 L Diesel

Manufacturer	Toyosha S-148
Fuel Type	Diesel
Configuration	2-cylinder, liquid-cooled
Displacement	90.1 ci 1.5 L
Bore/Stroke	3.82x3.94 inches 97 x 100 mm
Power	27.6 hp 20.6 kW
Fuel system	indirect injection
Air cleaner	dry
Pre-heating	glow plugs
Compression	23:1
Rated RPM	2500
Starter	electric
Starter volts	12
Oil capacity	4.2 qts 4.0 L
Coolant capacity	6.6 qts 6.2 L

Transmission

Transmission — 12 forward and 3 reverse gear

Type	gear
Gears	12 forward and 3 reverse
Oil capacity	22 qts 20.8 L
Four gears, plus reverse, in three ranges.

Dimensions

Hinomoto E280 Tires
Standard tires (ag)	Front: 5.00-15. Rear: 12.4-24
Lawn/turf front	20x8.00-10
Lawn/turf rear	13.6-16

Dimensions
Wheelbase	61.6 inches 156 cm
Length	105.3 inches 267 cm
Width	53.7 inches 136 cm
Height (steering wheel)	53.9 inches 136 cm
Height (exhaust)	77.4 inches 196 cm
Weight	2233 lbs 1012 kg
Clearance (front axle)	14.6 inches 37 cm
Clearance (drawbar)	14.8 inches 37 cm
Flange rear axle
Front tread	40.9 to 50.1 inches 103 to 127 cm
Rear tread	41.1 to 62.7 inches 104 to 159 cm

Photos

Hinomoto Hombre E280 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Hinomoto Hombre E280 based on its 27.6 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	5 ft (60 in)1.5 m	Medium Duty	Pasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep	54 to 60 in135 - 150 cm	Medium Duty	Thorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Hinomoto Hombre E280.

Estimated Continuous Field Runtime: 4.9 hrs

Approximately 4.9 hours of continuous field operation at ~75% rated power on a full tank (7.1 gal / 26.9 L).

Estimated 75% Load Fuel Burn~1.4 gal/hr (5.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours