IMT 5100
The IMT 5100 is a tractor produced by Imt. It is equipped with a 353.7 ci 5.8 L engine. The listed engine power is Diesel (listed): 105 hp / 78.3 kW. Transmission: 10 forward and 2 reverse. Operating weight: 13230 lbs 6001 kg.
Engine Power
Diesel (listed): 105 hp / 78.3 kW
Fuel & Capacities
68.7 gal
260.0 L
Transmission
10 forward and 2 reverse
Operating Weight
13230 lbs
6001 kg
Overview
 | 1982 - ???? | 1982 - ???? |
|---|
1982 - ???? |
|---|
Production | |
|---|---|
Manufacturer | IMT |
Built in Belgrade, Yugoslavia | |
Variants | |
|---|---|
5100 | 2WD |
5106 | 4WD |
IMT 5100 Engine | |
|---|---|
IMR 5.8L 6-cyl diesel | |
Fuel tank | 68.7 gal
260.0 L |
Engine details ...  | |
IMT 5100 Transmission | |
|---|---|
10-speed gear | |
Transmission details ...  |
IMT 5100 Power | |
|---|---|
Engine | 105 hp
78.3 kW |
Mechanical | |
|---|---|
Two-wheel drive | |
Power steering | |
Disc brakes | |
Cab standard. |
Hydraulics | |
|---|---|
Total flow | 9.3 gpm
35.2 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift | 7717.5 lbs
3500 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 108.3 inches
275 cm |
Weight | 13230 lbs
6001 kg |
Front tire | 11.00-16 |
Rear tire | 18.4-38 |
Full dimensions and tires ...  | |
References | |
|---|---|
 | |
Traktori 5100 5106 5130 5136 (019645) |
Engine
| 1982 - ???? | 1982 - ???? |
|---|
1982 - ???? |
|---|
Engine Detail — 353.7 ci / 5.8 L Diesel
Manufacturer | IMR S 46/T |
Fuel Type | Diesel |
Configuration | 6-cylinder |
Displacement | 353.7 ci
5.8 L |
Bore/Stroke | 3.87x5.00 inches
98 x 127 mm |
Power | 105 hp
78.3 kW |
Air cleaner | liquid |
Compression | 16:1 |
Rated RPM | 2250 |
Firing order | 1-5-3-6-2-4 |
Transmission
| 1982 - ???? | 1982 - ???? |
|---|
1982 - ???? |
|---|
Transmission — 10 forward and 2 reverse gear
Type | gear |
Gears | 10 forward and 2 reverse |
 | |
Dimensions
| 1982 - ???? | 1982 - ???? |
|---|
1982 - ???? |
|---|
IMT 5100 Tires | |
|---|---|
Ag front | 11.00-16 |
Ag rear | 18.4-38 |
Dimensions | |
|---|---|
Wheelbase | 108.3 inches
275 cm |
Length | 190.2 inches
483 cm |
Width | 86.7 inches
220 cm |
Height (cab) | 111.0 inches
281 cm |
Height (exhaust) | 112.6 inches
286 cm |
Weight | 13230 lbs
6001 kg |
Photos
IMT 5100 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Imt 5100 based on its 105 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Imt 5100.
Estimated Continuous Field Runtime: 12.6 hrs
Approximately 12.6 hours of continuous field operation at ~75% rated power on a full tank (68.7 gal / 260.1 L).
Estimated 75% Load Fuel Burn~5.5 gal/hr (20.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Imt 5100 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Imt 5100.
Converted Equivalents:
Horsepower (HP)105 hp
Kilowatts (kW)78.3 kW
Metric Horsepower (PS / CV)106.5 PS
Direct Competitor Comparison
Compare IMT 5100 against same-era industry alternatives in the same horsepower class.
Current Model
Imt
IMT 5100
Engine Power:Diesel (listed): 105 hp / 78.3 kW
★ Baseline Reference