International Harvester 234
The International Harvester 234 is a tractor produced by International Harvester. It is equipped with a 51.8 ci 0.8 L engine. The listed engine power is Diesel (listed): 18 hp / 13.4 kW. Transmission: infinite forward and reverse. Operating weight: 1205 lbs 546 kg.
Engine Power
Diesel (listed): 18 hp / 13.4 kW
Fuel & Capacities
4.8 gal
18.2 L
Transmission
infinite forward and reverse
Operating Weight
1205 lbs
546 kg
Overview
 | 1982 - 1984
Compact Utility tractorMitsubishi built
Compact Utility tractor
Mitsubishi built |
|---|
Production | |
|---|---|
Distributor | International Harvester |
Manufacturer | Mitsubishi |
Compact Utility tractor | |
Built in Japan | |
International Harvester 234 Engine | |
|---|---|
Mitsubishi 0.8L 3-cyl diesel | |
Engine details ...  |
International Harvester 234 Power | |
|---|---|
Engine | 18 hp
13.4 kW |
PTO (claimed) | 15.2 hp
11.3 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
two-post ROPS; canopy optional |
Capacity | |
|---|---|
Fuel | 4.8 gal
18.2 L |
Hydraulic system | 3.1 gal
11.7 L |
Hydraulics | |
|---|---|
Capacity | 3.1 gal
11.7 L |
Tractor hitch | |
|---|---|
Rear Type | 1 |
Power Take-off (PTO) | |
|---|---|
Rear PTO | transmission |
Rear PTO Type | 540 |
Front PTO | independent OptOptional |
Front PTO Type | 2700 |
Dimensions & Tires | |
|---|---|
Wheelbase | 56 inches
142 cm |
Weight | 1205 lbs
546 kg |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
 | |
Buyer's Guide 1982 published by International Harvester | |
200 Series Tractors published by International Harvester | |
New International Tractors published by International Harvester |
Engine
Engine Detail — 51.8 ci / 0.8 L Diesel
Manufacturer | Mitsubishi |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 51.8 ci
0.8 L |
Bore/Stroke | 2.68x3.07 inches
68 x 78 mm |
Power | 18 hp
13.4 kW |
Rated RPM | 2700 |
Starter volts | 12 |
Oil capacity | 3.2 qts
3.0 L |
Coolant capacity | 5.2 qts
4.9 L |
Transmission
Transmission options | |
|---|---|
6-speed gear | |
hydrostatic |
Transmission — 6 forward and 2 reverse gear
Type | gear |
Gears | 6 forward and 2 reverse |
Oil capacity | 12.4 qts
11.7 L |
Three gears plus reverse with high and low ranges. | |
With 8.00-18 rear tires. | |
 | |
Transmission — infinite forward and reverse hydrostatic
Type | hydrostatic |
Gears | infinite forward and reverse |
Dimensions
International Harvester 234 Tires |
|---|
Dimensions | |
|---|---|
Wheelbase | 56 inches
142 cm |
Length | 103.4 inches
262 cm |
Width | 36.9 inches
93 cm |
2WD Height (steering wheel) | 46.4 inches
117 cm |
4WD Height (steering wheel) | 46.6 inches
118 cm |
2WD Shipping weight | 1205 lbs
546 kg |
2WD Ground clearance | 11.2 inches
28 cm |
4WD Ground clearance | 8.5 inches
21 cm |
Rear tread | 29.1 to 35 inches
73 to 88 cm |
Photos
International Harvester 234
International Harvester 234 hydro operator station and controls.
Recommended Implements & Sizing Guide
Engineering recommendations for International Harvester 234 based on its 18 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for International Harvester 234.
Estimated Continuous Field Runtime: 5.1 hrs
Approximately 5.1 hours of continuous field operation at ~75% rated power on a full tank (4.8 gal / 18.2 L).
Estimated 75% Load Fuel Burn~0.9 gal/hr (3.5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
International Harvester 234 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for International Harvester 234.
Converted Equivalents:
Horsepower (HP)18 hp
Kilowatts (kW)13.4 kW
Metric Horsepower (PS / CV)18.2 PS
Direct Competitor Comparison
Compare International Harvester 234 against same-era industry alternatives in the same horsepower class.
Current Model
International Harvester
International Harvester 234
Engine Power:Diesel (listed): 18 hp / 13.4 kW
★ Baseline Reference
Related models
International Harvester D-215
- Power:
- 15
- Production years:
- 1962 - 1964
International Harvester 154 Lo-Boy
- Power:
- 15.6
- Production years:
- 1968 - 1974
International Harvester 185 Lo-Boy
- Power:
- 15.6
- Production years:
- 1974 - 1976
International Harvester Type A 15HP
- Power:
- 16.7
- Production years:
- 1908 - 1911
International Harvester D-217
- Power:
- 17
- Production years:
- 1956 - 1962