International Harvester 244

The International Harvester 244 is a tractor produced by International Harvester. It is equipped with a 59.74 ci 1.0 L engine. The listed engine power is Diesel (listed): 21 hp / 15.7 kW. Transmission: 9 forward and 3 reverse. Operating weight: 1716 lbs 778 kg.

Engine Power

Diesel (listed): 21 hp / 15.7 kW

Fuel & Capacities

5.5 gal 20.8 L

Transmission

9 forward and 3 reverse

Operating Weight

1716 lbs 778 kg

Overview

	1982 - 1984 Compact Utility tractorMitsubishi built Compact Utility tractor Mitsubishi built

Production
Distributor	International Harvester
Manufacturer	Mitsubishi
Compact Utility tractor
Built in Japan

International Harvester 244 Engine
Mitsubishi 1.0L 3-cyl diesel
Engine details ...

International Harvester 244 Transmission
9-speed gear
Transmission details ...

International Harvester 244 Power
Engine	21 hp 15.7 kW
PTO (claimed)	18 hp 13.4 kW

Mechanical
Two- or four-wheel drive
Two-post ROPS. ROPS canopy optional.

Capacity
Fuel	5.5 gal 20.8 L
Hydraulic system	6.6 gal 25.0 L

Hydraulics
Capacity	6.6 gal 25.0 L

Tractor hitch
Rear Type	I

Power Take-off (PTO)
Rear PTO	live
Rear PTO Type	540/1250

Dimensions & Tires
Wheelbase	60 inches 152 cm
Weight	1716 lbs 778 kg
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

Buyer's Guide 1982 published by International Harvester
200 Series Tractors published by International Harvester
New International Tractors published by International Harvester

Engine

Engine Detail — 59.74 ci / 1.0 L Diesel

Manufacturer	Mitsubishi
Fuel Type	Diesel
Configuration	3-cylinder, liquid-cooled
Displacement	59.74 ci 1.0 L
Bore/Stroke	2.87x3.07 inches 73 x 78 mm
Power	21 hp 15.7 kW
Rated RPM	2700
Starter volts	12
Oil capacity	4.4 qts 4.2 L
Coolant capacity	5.2 qts 4.9 L

Transmission

Transmission — 9 forward and 3 reverse gear

Type	gear
Gears	9 forward and 3 reverse
Oil capacity	26.4 qts 25.0 L
Three gears, plus reverse, in three ranges.
With 9.5-24 rear tires.

Dimensions

International Harvester 244 Tires

Dimensions
Wheelbase	60 inches 152 cm
Length	113 inches*With 3-point 287 cm
Width	43.7 inches*Minimum 110 cm
Height (steering wheel)	53 inches 134 cm
Shipping weight	1716 lbs*Two-wheel drive 778 kg
Ground clearance	13.6 inches (frame) 34 cm

Photos

International 244 with center-mount mower.

Recommended Implements & Sizing Guide

Engineering recommendations for International Harvester 244 based on its 21 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	4 ft (48 in)1.2 m	Light Duty	Pasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep	42 to 48 in105 - 120 cm	Light Duty	Covers compact tractor tire width.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for International Harvester 244.

Estimated Continuous Field Runtime: 5 hrs

Approximately 5 hours of continuous field operation at ~75% rated power on a full tank (5.5 gal / 20.8 L).

Estimated 75% Load Fuel Burn~1.1 gal/hr (4.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours