International Harvester A-976
The International Harvester A-976 is a tractor produced by International Harvester. It is equipped with a 358 ci 5.9 L engine. The listed engine power is Diesel (listed): 134 hp / 99.9 kW. Transmission: International Harvester Torque Amplifier. Operating weight: 11000 lbs 4989 kg.
Engine Power
Diesel (listed): 134 hp / 99.9 kW
Transmission
International Harvester Torque Amplifier
Operating Weight
11000 lbs
4989 kg
Overview
 | 1976 - 1978
66A SeriesRow-Crop tractor
66A Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | International Harvester |
Row-Crop tractor | |
Built in Geelong, Australia | |
International Harvester A-976 Engine | |
|---|---|
International Harvester 5.9L 6-cyl diesel | |
Engine details ...  |
International Harvester A-976 Transmission | |
|---|---|
16-speed two-speed power shift | |
Transmission details ...  |
International Harvester A-976 Power | |
|---|---|
Engine | 134 hp
99.9 kW |
PTO (claimed) | 112 hp
83.5 kW |
Mechanical | |
|---|---|
Two-wheel drive | |
Final drives | bull gear |
Power steering | |
Open operator station. Cab optional. | |
Tractor hitch | |
|---|---|
Rear Type | II |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 (1.375) |
Dimensions & Tires | |
|---|---|
Wheelbase | 104.8 inches
266 cm |
Weight | 11000 lbs
4989 kg |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
 | |
International Harvester Australia: Geelong Works by Sarah Tomac* | |
Technical Annual published in 1977, by Power Farming | |
*Publication contains known errors. |
Engine
Engine Detail — 358 ci / 5.9 L Diesel
Manufacturer | International Harvester DT-358 |
Configuration | turbocharged diesel, 6-cylinder, liquid-cooled inline |
Displacement | 358 ci
5.9 L |
Bore/Stroke | 3.875x5.0625 inches
98 x 129 mm |
Power | 134 hp
99.9 kW |
Rated RPM | 2500 |
Torque | 327 lb-ft
443.4 Nm |
Torque RPM | 1600 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — International Harvester Torque Amplifier
Transmission | International Harvester Torque Amplifier |
Type | two-speed power shift |
Gears | 16 forward and 8 reverse |
Clutch | 356mm dry disc |
Dimensions
International Harvester A-976 Tires |
|---|
Dimensions | |
|---|---|
Wheelbase | 104.8 inches
266 cm |
Length | 159.4 inches
404 cm |
Width | 97.6 inches
247 cm |
Height (steering wheel) | 86.1 inches
218 cm |
Shipping weight | 11000 lbs
4989 kg |
Photos
International Harvester A-976
Recommended Implements & Sizing Guide
Engineering recommendations for International Harvester A-976 based on its 134 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for International Harvester A-976.
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
International Harvester A-976 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for International Harvester A-976.
Converted Equivalents:
Horsepower (HP)134 hp
Kilowatts (kW)99.9 kW
Metric Horsepower (PS / CV)135.9 PS
Direct Competitor Comparison
Compare International Harvester A-976 against same-era industry alternatives in the same horsepower class.
Current Model
International Harvester
International Harvester A-976
Engine Power:Diesel (listed): 134 hp / 99.9 kW
★ Baseline Reference
Related models
International Harvester 1046
- Power:
- 108.5
- Production years:
- 1971 - 1978
International Harvester 856
- Power:
- 111.6
- Production years:
- 1967 - 1971
International Harvester TD-18A
- Power:
- 112.2
- Production years:
- 1949 - 1958
International Harvester Hydro 186
- Power:
- 115.6
- Production years:
- 1976 - 1981
International Harvester Hydro 100
- Power:
- 115.7
- Production years:
- 1973 - 1976