Deutz-Fahr M600
The Deutz-Fahr M600 is a tractor produced by Deutz Fahr. It is equipped with a 369.6 ci 6.1 L engine. The listed engine power is Diesel (listed): 121 hp / 90.2 kW. Transmission: ZF 7200. Operating weight: 12040 lbs 5461 kg.
Engine Power
Diesel (listed): 121 hp / 90.2 kW
Fuel & Capacities
71.3 gal
269.9 L
Transmission
ZF 7200
Operating Weight
12040 lbs
5461 kg
Overview
 | 2007 - 2009
Agrotron M Series |
|---|
Production | |
|---|---|
Manufacturer | Deutz-Fahr |
Deutz-Fahr M600 Engine | |
|---|---|
Deutz 6.1L 6-cyl diesel | |
Engine details ...  |
Deutz-Fahr M600 Power | |
|---|---|
Engine | 121 hp
90.2 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Wet disc brakes | |
Cab standard with air-conditioning. |
Capacity | |
|---|---|
Fuel | 71.3 gal
269.9 L |
Hydraulic system | 10.6 gal
40.1 L |
Hydraulics | |
|---|---|
Type | open center |
load sensing OptOptional | |
Capacity | 10.6 gal
40.1 L |
Pressure | 2900 psi
200.0 bar |
Rear valves | 4 |
Pump flow | 21.9 gpm*Open center
82.9 lpm |
31.7 gpm*Load sensing
120.0 lpm | |
Steering flow | 11 gpm
41.6 lpm |
Steering press. | 2600 psi
179.3 bar |
Tractor hitch | |
|---|---|
Rear Type | III/II |
Control | position and draft control |
Rear lift | 13640 lbs
6187 kg |
20240 lbsOptOptional
9180 kg | |
Front Hitch | II |
Front lift | 8800 lbs
3991 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Engine RPM | 540@1995 |
540E@1610 | |
1000@1995 | |
1000E@1610 | |
Front PTO | independent OptOptional |
Front PTO Type | 1000 |
Engine RPM | 1000@1960 |
Dimensions & Tires | |
|---|---|
Wheelbase | 104.3 inches
264 cm |
Weight | 12040 lbs
5461 kg |
Front tire | 16.9R24 |
Rear tire | 18.4R38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Charging system | alternator |
Charging amps | 150 |
Battery volts | 12 |
Battery AH | 143 |
190 OptOptional | |
Engine
Engine Detail — 369.6 ci / 6.1 L Diesel
Manufacturer | Deutz |
Configuration | turbocharged intercooled diesel, 6-cylinder 12-valve, liquid-cooled |
Displacement | 369.6 ci
6.1 L |
Bore/Stroke | 3.98x4.96 inches
101 x 126 mm |
Power | 121 hp
90.2 kW |
Maximum Power | 132 hp
98.4 kW |
Rated RPM | 2100 |
Torque | 388.7 lb-ft
527.1 Nm |
Torque RPM | 1100 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
24-speed partial power shift | |
40-speed creeper |
Transmission — ZF 7200
Transmission | ZF 7200 |
Type | partial power shift |
Gears | 24 forward and reverse |
Clutch | wet disc |
Four power shift gears in six synchronized ranges with power shuttle. | |
Transmission — 40 forward and reverse creeper
Manufacturer | ZF |
Type | creeper |
Gears | 40 forward and reverse |
Clutch | wet disc |
Optional creeper provides an additional four ranges (with four speeds each) to the main transmission. | |
Dimensions
Deutz-Fahr M600 Tires | |
|---|---|
Standard tires (ag) | Front: 16.9R24. Rear: 18.4R38 |
Dimensions | |
|---|---|
Wheelbase | 104.3 inches
264 cm |
Length | 180.7 inches
458 cm |
Height (cab) | 115 inches
292 cm |
Weight | 12040 lbs
5461 kg |
Photos
Deutz-Fahr M600 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Deutz Fahr Deutz-Fahr M600 based on its 121 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr M600.
Estimated Continuous Field Runtime: 11.3 hrs
Approximately 11.3 hours of continuous field operation at ~75% rated power on a full tank (71.3 gal / 269.9 L).
Estimated 75% Load Fuel Burn~6.3 gal/hr (23.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Deutz Fahr Deutz-Fahr M600 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr M600.
Converted Equivalents:
Horsepower (HP)121 hp
Kilowatts (kW)90.2 kW
Metric Horsepower (PS / CV)122.7 PS
Direct Competitor Comparison
Compare Deutz-Fahr M600 against same-era industry alternatives in the same horsepower class.
Current Model
Deutz Fahr
Deutz-Fahr M600
Engine Power:Diesel (listed): 121 hp / 90.2 kW
★ Baseline Reference
Related models
Deutz-Fahr DX 6.05
- Power:
- 98
- Production years:
- 1987 - 1991
Deutz-Fahr Intrac 6.05
- Power:
- 98
- Production years:
- 1987 - 1988
Deutz-Fahr Agroplus 100
- Power:
- 99
- Production years:
- 1997 - 2004
Deutz-Fahr 4.78
- Power:
- 100
- Production years:
- 1993 - 1995
Deutz-Fahr 6.06
- Power:
- 100
- Production years:
- 1990 - 1995