International Harvester D-430

The International Harvester D-430 is a tractor produced by International Harvester. It is equipped with a 132.7 ci 2.2 L engine. The listed engine power is Diesel (listed): 30 hp / 22.4 kW. Transmission: 6 forward and 1 reverse. Operating weight: 3085 lbs 1399 kg.

Engine Power

Diesel (listed): 30 hp / 22.4 kW

Fuel & Capacities

7.9 gal 29.9 L

Transmission

6 forward and 1 reverse

Operating Weight

3085 lbs 1399 kg

Overview

	1956 - 1962

Production
Manufacturer	International Harvester
Built in Neuss, Germany
Total built	18,231

International Harvester D-430 Engine
International Harvester 2.2L 4-cyl diesel
Fuel tank	7.9 gal 29.9 L
Engine details ...

International Harvester D-430 Transmission
6-speed gear
Transmission details ...

International Harvester D-430 Power
Engine	30 hp 22.4 kW

Mechanical
Two-wheel drive
Manual steering
Open operator station.

Tractor hitch
Rear Type	II OptOptional

Power Take-off (PTO)
Rear PTO Type	540 (1.375)

Dimensions & Tires
Wheelbase	74 inches 187 cm
Weight	3085 lbs 1399 kg
Front tire	5.00x16
Rear tire	10x28
Full dimensions and tires ...

Belt Pulley
Diameter	9.5 inches 24 cm
Width	6.375 inches 16 cm
RPM	1325

References

D-430 Farmall Diesel Tractor published by International Harvester

Engine

Engine Detail — 132.7 ci / 2.2 L Diesel

Manufacturer	International Harvester DD-132
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	132.7 ci 2.2 L
Bore/Stroke	3.25x4.00 inches 83 x 102 mm
Power	30 hp 22.4 kW
Compression	19:1
Rated RPM	1750
Starter	electric
Starter volts	12
Oil capacity	7 qts 6.6 L
Coolant capacity	14.8 qts 14.0 L

Transmission

Transmission — 6 forward and 1 reverse gear

Type	gear
Gears	6 forward and 1 reverse
Oil capacity	25.4 qts 24.0 L
With 10x28 rear tires.

Dimensions

International Harvester D-430 Tires
Ag front	5.00x16
Ag rear	10x28
Ag front	5.50x16
	6.00x16
Ag rear	11x28
	9x36

Dimensions
Wheelbase	74 inches 187 cm
Length	115.25 inches 292 cm
Width	64.625 inches 164 cm
Height	61.25 inches 155 cm
Weight	3085 lbs 1399 kg
Ground clearance	15.125 inches 38 cm
Front tread	49.25 to 80.75 inches 125 to 205 cm
Rear tread	49.25 to 74.75 inches 125 to 189 cm

Photos

International Harvester D-430

Recommended Implements & Sizing Guide

Engineering recommendations for International Harvester D-430 based on its 30 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	5 ft (60 in)1.5 m	Medium Duty	Pasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep	54 to 60 in135 - 150 cm	Medium Duty	Thorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for International Harvester D-430.

Estimated Continuous Field Runtime: 5.1 hrs

Approximately 5.1 hours of continuous field operation at ~75% rated power on a full tank (7.9 gal / 29.9 L).

Estimated 75% Load Fuel Burn~1.6 gal/hr (5.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours