International Harvester DGD-4

The International Harvester DGD-4 is a tractor produced by International Harvester. It is equipped with a 132.7 ci 2.2 L engine. The listed engine power is Diesel (listed): 30 hp / 22.4 kW. Transmission: 5 forward and 1 reverse. Operating weight: 2855 lbs 1295 kg.

Engine Power

Diesel (listed): 30 hp / 22.4 kW

Fuel & Capacities

8.7 gal 32.9 L

Transmission

5 forward and 1 reverse

Operating Weight

2855 lbs 1295 kg

Overview

	1953 - 1956 Row-Crop tractor

Production
Manufacturer	International Harvester
Row-Crop tractor
Built in Neuss, Germany
Total built	8,130

International Harvester DGD-4 Engine
International Harvester 2.2L 4-cyl diesel
Fuel tank	8.7 gal 32.9 L
Engine details ...

International Harvester DGD-4 Transmission
5-speed gear
Transmission details ...

International Harvester DGD-4 Power
Engine	30 hp 22.4 kW

Mechanical
Two-wheel drive
Differential lock	mechanical rear
Disc brakes
Open operator station.

Tractor hitch
Rear Type	II/I

Power Take-off (PTO)
Rear PTO Type	540 (1.375)

Dimensions & Tires
Weight	2855 lbs 1295 kg
Front tire	4.00-19
Rear tire	10-28
Full dimensions and tires ...

Belt Pulley
Diameter	9.5 inches 24 cm
Width	6.375 inches 16 cm
RPM	1325

References

DGD 4 published in 1953, by International Harvester

Engine

Engine Detail — 132.7 ci / 2.2 L Diesel

Manufacturer	International Harvester DD-132
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	132.7 ci 2.2 L
Bore/Stroke	3.252x4.00 inches 83 x 102 mm
Power	30 hp 22.4 kW
Compression	19:1
Rated RPM	1750
Starter volts	12
Oil capacity	6.9 qts 6.5 L
Coolant capacity	13.7 qts 13.0 L

Transmission

Transmission — 5 forward and 1 reverse gear

Type	gear
Gears	5 forward and 1 reverse
With 10-28 rear tires.

Dimensions

International Harvester DGD-4 Tires
Ag front	4.00-19
Ag rear	10-28
Ag front	5.50-16
	6.00-16
Ag rear	8-36
	9-36
	11-28

Dimensions
Length	111.5 inches 283 cm
Width	64.25 inches 163 cm
Height	52.25 inches 132 cm
Weight	2855 lbs 1295 kg
Front tread	49.25 to 80.75 inches 125 to 205 cm
Rear tread	49.25 to 74.75 inches 125 to 189 cm

Photos

International Harvester DGD-4

Recommended Implements & Sizing Guide

Engineering recommendations for International Harvester DGD-4 based on its 30 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	5 ft (60 in)1.5 m	Medium Duty	Pasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep	54 to 60 in135 - 150 cm	Medium Duty	Thorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for International Harvester DGD-4.

Estimated Continuous Field Runtime: 5.6 hrs

Approximately 5.6 hours of continuous field operation at ~75% rated power on a full tank (8.7 gal / 32.9 L).

Estimated 75% Load Fuel Burn~1.6 gal/hr (5.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours