International Harvester F-240

The International Harvester F-240 is a tractor produced by International Harvester. It is equipped with a 128 ci 2.1 L engine. The listed engine power is Diesel (listed): 30 hp / 22.4 kW. Transmission: 6 forward and 2 reverse. Operating weight: 3527 to 4455 pounds.

Engine Power

Diesel (listed): 30 hp / 22.4 kW

Fuel & Capacities

11.4 gal 43.1 L

Transmission

6 forward and 2 reverse

Operating Weight

3527 to 4455 pounds

Overview

	1962 - 1965 Utility tractor

Production
Manufacturer	International Harvester
Utility tractor
Built in Saint Dizier, France

Variants
Standard	utility
Vineyard	narrow
Farmall	row-crop

International Harvester F-240 Engine
International Harvester 2.1L 4-cyl diesel
Fuel tank	11.4 gal 43.1 L
Engine details ...

International Harvester F-240 Transmission
6-speed gear
Transmission details ...

International Harvester F-240 Power
Engine	30 hp 22.4 kW

Mechanical
Two-wheel drive
Differential lock	mechanical rear
Manual steering
Disc brakes
Open operator station.

Tractor hitch
Rear Type	I

Power Take-off (PTO)
Rear PTO Type	540

Dimensions & Tires
Wheelbase	85.4 inches 216 cm
Weight	3527 to 4455 pounds
Front tire	4.50-16
Rear tire	11-28
Full dimensions and tires ...

References

Farmall F 240 - F 270 published in 1962, by International Harvester
F 240 published in 1962, by International Harvester

Engine

Engine Detail — 128 ci / 2.1 L Diesel

Manufacturer	International Harvester FD-128
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	128 ci 2.1 L
Bore/Stroke	3.19x4.00 inches 81 x 102 mm
Power	30 hp 22.4 kW
Fuel system	indirect injection
Rated RPM	1800
Starter	electric
Starter volts	12
Oil capacity	6.6 qts 6.2 L
Coolant capacity	13 qts 12.3 L

Transmission

Transmission — 6 forward and 1 reverse gear

Type	gear
Gears	6 forward and 1 reverse
Oil capacity	37.5 qts 35.5 L
With 9-36 rear tires.

Transmission — 6 forward and 2 reverse gear

Type	gear
Gears	6 forward and 2 reverse
With 11-36 rear tires.

Dimensions

International Harvester F-240 Tires
Ag front	4.50-16
Standard Ag rear	11-28
Farmall Ag rear	11-36
Vineyard Ag rear	11-24
Ag front	6.00-16
Ag rear	10-28
	9-36
	10-36
	9-24
	13-24
	9-28

Dimensions
Wheelbase	85.4 inches 216 cm
Standard Length	113.4 inches 288 cm
Farmall Length	124.8 inches 316 cm
Vineyard Length	112.2 inches 284 cm
Width	87 inches 220 cm
Height	50 inches 127 cm
Ground clearance	16.1 inches 40 cm
Front tread	49.2 to 74.8 inches 124 to 189 cm
Rear tread	50 to 74.8 inches 127 to 189 cm

International Harvester F-240 Weight
Standard	3638 lbs 1650 kg
Farmall	4455 lbs 2020 kg
Vineyard	3527 lbs 1599 kg

Photos

International Harvester F-240 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for International Harvester F-240 based on its 30 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	5 ft (60 in)1.5 m	Medium Duty	Pasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep	54 to 60 in135 - 150 cm	Medium Duty	Thorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for International Harvester F-240.

Estimated Continuous Field Runtime: 7.3 hrs

Approximately 7.3 hours of continuous field operation at ~75% rated power on a full tank (11.4 gal / 43.2 L).

Estimated 75% Load Fuel Burn~1.6 gal/hr (5.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours