Iseki AT240
The Iseki AT240 is a tractor produced by Iseki. It is equipped with a 91.4 ci 1.5 L engine. The listed engine power is Diesel (listed): 23.7 hp / 17.7 kW. Transmission: 16 forward and reverse. Operating weight: 2866 to 3175 pounds.
Engine Power
Diesel (listed): 23.7 hp / 17.7 kW
Fuel & Capacities
9.25 gal
35.0 L
Transmission
16 forward and reverse
Operating Weight
2866 to 3175 pounds
Overview
![]() | 2010 - 2012
AT SeriesCompact Utility tractor
AT Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Iseki AT240 Engine | |
|---|---|
Iseki 1.5L 3-cyl diesel | |
Fuel tank | 9.25 gal
35.0 L |
Engine details ... | |
Iseki AT240 Transmission | |
|---|---|
16-speed | |
Transmission details ... |
Iseki AT240 Power | |
|---|---|
Engine | 23.7 hp
17.7 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Wet disc brakes | |
Two-post ROPS. Cab optional with air-conditioning. |
Tractor hitch | |
|---|---|
Rear Type | I |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 569@2500 |
765@2500 | |
942@2500 | |
1227@2500 | |
-765@2500 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 64.4 inches
163 cm |
Weight | 2866 to 3175 pounds |
Front tire | 7-14 |
Rear tire | 9.5-24 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
![]() | |
AT published in 2013, by Iseki |
Engine
Engine Detail — 91.4 ci / 1.5 L Diesel
Manufacturer | Iseki E3CD |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 91.4 ci
1.5 L |
Bore/Stroke | 3.425x3.31 inches
87 x 84 mm |
Power | 23.7 hp
17.7 kW |
Rated RPM | 2500 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — 16 forward and reverse
Gears | 16 forward and reverse |
Clutch | dry disc |
Dimensions
Iseki AT240 Tires | |
|---|---|
Standard tires (ag) | Front: 7-14. Rear: 9.5-24 |
Dimensions | |
|---|---|
Wheelbase | 64.4 inches
163 cm |
Length | 118.9 inches
302 cm |
Width | 50.4 inches
128 cm |
Height (ROPS) | 77.2 inches
196 cm |
Height (cab) | 77.6 inches
197 cm |
ROPS Weight | 2866 lbs
1300 kg |
Cab Weight | 3175 lbs
1440 kg |
Ground clearance | 12.6 inches
32 cm |
Front tread | 37.8 inches
96 cm |
Rear tread | 39.8/46.1 inches
101/117 cm |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki AT240 based on its 23.7 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki AT240.
Estimated Continuous Field Runtime: 7.5 hrs
Approximately 7.5 hours of continuous field operation at ~75% rated power on a full tank (9.3 gal / 35 L).
Estimated 75% Load Fuel Burn~1.2 gal/hr (4.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki AT240 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki AT240.
Converted Equivalents:
Horsepower (HP)23.7 hp
Kilowatts (kW)17.7 kW
Metric Horsepower (PS / CV)24 PS
Direct Competitor Comparison
Compare Iseki AT240 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki AT240
Engine Power:Diesel (listed): 23.7 hp / 17.7 kW
★ Baseline Reference
Related models
Iseki TL1900
- Power:
- 19
- Production years:
- 1980 - 1985
Iseki TF193
- Power:
- 19.2
Iseki TM3200
- Power:
- 19.2
- Production years:
- 2004 - 2010
Iseki TM3215
- Power:
- 19.2
- Production years:
- 2010 - 2020
Iseki RTS20
- Power:
- 19.7
- Production years:
- 2016 - 2023


