Iseki AT25
The Iseki AT25 is a tractor produced by Iseki. It is equipped with a 91.4 ci 1.5 L engine. The listed engine power is Diesel (listed): 24.7 hp / 18.4 kW. Transmission: 24 forward and reverse. Operating weight: 2899 to 3153 pounds.
Engine Power
Diesel (listed): 24.7 hp / 18.4 kW
Fuel & Capacities
9.25 gal
35.0 L
Transmission
24 forward and reverse
Operating Weight
2899 to 3153 pounds
Overview
![]() | 2004 - 2009
AT SeriesCompact Utility tractor
AT Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Iseki AT25 Engine | |
|---|---|
Iseki 1.5L 3-cyl diesel | |
Fuel tank | 9.25 gal
35.0 L |
Engine details ... | |
Iseki AT25 Power | |
|---|---|
Engine | 24.7 hp
18.4 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Wet disc brakes | |
Two-post ROPS. Cab optional. |
Tractor hitch | |
|---|---|
Rear Type | I |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 569@2500 |
765@2500 | |
942@2500 | |
1227@2500 | |
-765@2500 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 65.6 inches
166 cm |
Weight | 2899 to 3153 pounds |
Front tire | 7-16 |
Rear tire | 11.2-24 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
![]() | |
AT published in 2008, by Iseki |
Engine
Engine Detail — 91.4 ci / 1.5 L Diesel
Manufacturer | Iseki E3CD |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 91.4 ci
1.5 L |
Bore/Stroke | 3.425x3.31 inches
87 x 84 mm |
Power | 24.7 hp
18.4 kW |
Rated RPM | 2500 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
16-speed | |
24-speed |
Transmission — 16 forward and reverse
Gears | 16 forward and reverse |
Clutch | dry disc |
Transmission — 24 forward and reverse
Gears | 24 forward and reverse |
Dimensions
Iseki AT25 Tires | |
|---|---|
Standard tires (ag) | Front: 7-16. Rear: 11.2-24 |
Dimensions | |
|---|---|
Wheelbase | 65.6 inches
166 cm |
Length | 118.5 inches
300 cm |
Width | 52.8 inches
134 cm |
Height (ROPS) | 78.2 inches
198 cm |
Height (cab) | 78.2 inches
198 cm |
ROPS Weight | 2899 lbs
1314 kg |
Cab Weight | 3153 lbs
1430 kg |
Ground clearance | 14 inches
35 cm |
Front tread | 42.9 inches
108 cm |
Rear tread | 41.3 to 54 inches
104 to 137 cm |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki AT25 based on its 24.7 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki AT25.
Estimated Continuous Field Runtime: 7.2 hrs
Approximately 7.2 hours of continuous field operation at ~75% rated power on a full tank (9.3 gal / 35 L).
Estimated 75% Load Fuel Burn~1.3 gal/hr (4.9 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki AT25 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki AT25.
Converted Equivalents:
Horsepower (HP)24.7 hp
Kilowatts (kW)18.4 kW
Metric Horsepower (PS / CV)25 PS
Direct Competitor Comparison
Compare Iseki AT25 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki AT25
Engine Power:Diesel (listed): 24.7 hp / 18.4 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester Farmall
Engine Power:22.3
Production Years:1924 - 1932
Related models
Iseki TU320
- Power:
- 20
Iseki TF21F
- Power:
- 20.7
- Production years:
- 1995 - 2005
Iseki TL2101
- Power:
- 20.7
- Production years:
- 1980 - 1985
Iseki TPC213
- Power:
- 20.7
- Production years:
- 2019 - 2026
Iseki TU2100
- Power:
- 20.7
- Production years:
- 1981 - 1984


