Iseki AT280
The Iseki AT280 is a tractor produced by Iseki. It is equipped with a 100.5 ci 1.6 L engine. The listed engine power is Diesel (listed): 27.6 hp / 20.6 kW. Transmission: 24 forward and reverse. Operating weight: 3020 to 3351 pounds.
Engine Power
Diesel (listed): 27.6 hp / 20.6 kW
Fuel & Capacities
9.25 gal
35.0 L
Transmission
24 forward and reverse
Operating Weight
3020 to 3351 pounds
Overview
![]() | 2010 - 2012
AT SeriesCompact Utility tractor
AT Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Variants | |
|---|---|
AT280 | wheeled |
AT280C | half-track |
Iseki AT280 Engine | |
|---|---|
Iseki 1.6L 3-cyl diesel | |
Fuel tank | 9.25 gal
35.0 L |
Engine details ... | |
Iseki AT280 Power | |
|---|---|
Engine | 27.6 hp
20.6 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Wet disc brakes | |
Two-post ROPS. Cab optional with air-conditioning. |
Tractor hitch | |
|---|---|
Rear Type | I |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 569@2500 |
765@2500 | |
942@2500 | |
1227@2500 | |
-765@2500 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 66 inches
167 cm |
Weight | 3020 to 3351 pounds |
Front tire | 7-16 |
Rear tire | 12.4-24 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
![]() | |
AT published in 2013, by Iseki |
Engine
Engine Detail — 100.5 ci / 1.6 L Diesel
Manufacturer | Iseki E3CG |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 100.5 ci
1.6 L |
Bore/Stroke | 3.43x3.62 inches
87 x 92 mm |
Power | 27.6 hp
20.6 kW |
Rated RPM | 2500 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
16-speed | |
24-speed |
Transmission — 16 forward and reverse
Gears | 16 forward and reverse |
Clutch | dry disc |
Transmission — 24 forward and reverse
Gears | 24 forward and reverse |
Dimensions
Iseki AT280 Tires | |
|---|---|
Standard tires (ag) | Front: 7-16. Rear: 12.4-24 |
Dimensions | |
|---|---|
Wheelbase | 66 inches
167 cm |
Length | 120.1 inches
305 cm |
Width | 54.3 inches
137 cm |
Height (ROPS) | 77.2 inches
196 cm |
Height (cab) | 77.8 inches
197 cm |
ROPS Weight | 3020 lbs
1369 kg |
Cab Weight | 3351 lbs
1520 kg |
Ground clearance | 13.6 inches
34 cm |
Front tread | 42.9 inches
108 cm |
Rear tread | 41.3 to 53.9 inches
104 to 136 cm |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki AT280 based on its 27.6 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki AT280.
Estimated Continuous Field Runtime: 6.5 hrs
Approximately 6.5 hours of continuous field operation at ~75% rated power on a full tank (9.3 gal / 35 L).
Estimated 75% Load Fuel Burn~1.4 gal/hr (5.4 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki AT280 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki AT280.
Converted Equivalents:
Horsepower (HP)27.6 hp
Kilowatts (kW)20.6 kW
Metric Horsepower (PS / CV)28 PS
Direct Competitor Comparison
Compare Iseki AT280 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki AT280
Engine Power:Diesel (listed): 27.6 hp / 20.6 kW
★ Baseline Reference
Related models
Iseki TM3245
- Power:
- 22.3
- Production years:
- 2010 - 2020
Iseki TM223
- Power:
- 22.5
- Production years:
- 1994 - 2004
Iseki AT23
- Power:
- 22.7
- Production years:
- 2004 - 2009
Iseki TF23F
- Power:
- 22.7
- Production years:
- 1995 - 2005
Iseki TG233
- Power:
- 22.7
- Production years:
- 1994 - 2004


