Iseki TA263
The Iseki TA263 is a tractor produced by Iseki. It is equipped with a 91.4 ci 1.5 L engine. The listed engine power is Diesel (listed): 25.6 hp / 19.1 kW. Transmission: 16 forward and reverse. Operating weight: 2260 to 2954 pounds.
Engine Power
Diesel (listed): 25.6 hp / 19.1 kW
Fuel & Capacities
5.6 gal
21.2 L
Transmission
16 forward and reverse
Operating Weight
2260 to 2954 pounds
Overview
![]() | 1989 - 1992
Landleader TA7 SeriesCompact Utility tractor
Landleader TA7 Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Variants | |
|---|---|
TA263F | 4WD |
Iseki TA263 Engine | |
|---|---|
Iseki 1.5L 3-cyl diesel | |
Fuel tank | 5.6 gal
21.2 L |
Engine details ... | |
Iseki TA263 Transmission | |
|---|---|
16-speed | |
Transmission details ... |
Iseki TA263 Power | |
|---|---|
Engine | 25.6 hp
19.1 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Open operator station. Cab optional. |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 565@2500 |
733@2500 | |
1060@2500 | |
1244@2500 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 60.6 inches
153 cm |
Weight | 2260 to 2954 pounds |
Front tire | 4.00-15 |
2WD Rear tire | 9.5-24 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
![]() | |
Land Leader 7 Series published in 1993, by Iseki |
Engine
Engine Detail — 91.4 ci / 1.5 L Diesel
Manufacturer | Iseki E3ADI |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 91.4 ci
1.5 L |
Bore/Stroke | 3.43x3.31 inches
87 x 84 mm |
Power | 25.6 hp
19.1 kW |
Rated RPM | 2500 |
Starter | electric |
Starter volts | 12 |
Oil capacity | 5.1 qts
4.8 L |
Iseki TA263 Engine | |
|---|---|
![]() |
Transmission
Transmission — 16 forward and reverse
Gears | 16 forward and reverse |
Four gears (1-4) in four ranges with shuttle shift. | |
![]() | |
Dimensions
Iseki TA263 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 4.00-15. Rear: 9.5-24 |
4WD Standard tires (ag) | Front: 7-14. Rear: 9.5-24 |
Dimensions | |
|---|---|
Wheelbase | 60.6 inches
153 cm |
Length | 114.4 inches
290 cm |
Width | 49.2 inches
124 cm |
Height (steering wheel) | 55.7 inches
141 cm |
Height (cab) | 77.2 inches
196 cm |
Ground clearance | 11.6 inches
29 cm |
2WD Front tread | 37.8/41.7 inches
96/105 cm |
4WD Front tread | 42.1 inches
106 cm |
Rear tread | 38.6/44.5 inches
98/113 cm |
Iseki TA263 Weight | |
|---|---|
2WD Open | 2260 lbs
1025 kg |
4WD Open | 2469 lbs
1119 kg |
2WD Cab | 2745 lbs
1245 kg |
4WD Cab | 2954 lbs
1339 kg |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki TA263 based on its 25.6 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TA263.
Estimated Continuous Field Runtime: 4.2 hrs
Approximately 4.2 hours of continuous field operation at ~75% rated power on a full tank (5.6 gal / 21.2 L).
Estimated 75% Load Fuel Burn~1.3 gal/hr (5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki TA263 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TA263.
Converted Equivalents:
Horsepower (HP)25.6 hp
Kilowatts (kW)19.1 kW
Metric Horsepower (PS / CV)26 PS
Direct Competitor Comparison
Compare Iseki TA263 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki TA263
Engine Power:Diesel (listed): 25.6 hp / 19.1 kW
★ Baseline Reference
Related models
Iseki TF21F
- Power:
- 20.7
- Production years:
- 1995 - 2005
Iseki TL2101
- Power:
- 20.7
- Production years:
- 1980 - 1985
Iseki TPC213
- Power:
- 20.7
- Production years:
- 2019 - 2026
Iseki TU2100
- Power:
- 20.7
- Production years:
- 1981 - 1984
Iseki TU2101
- Power:
- 20.7
- Production years:
- 1984 - 1994




