Iseki TA267
The Iseki TA267 is a tractor produced by Iseki. It is equipped with a 91.4 ci 1.5 L engine. The listed engine power is Diesel (listed): 25.6 hp / 19.1 kW. Transmission: 16 forward and reverse. Operating weight: 2348 to 3031 pounds.
Engine Power
Diesel (listed): 25.6 hp / 19.1 kW
Fuel & Capacities
7.9 gal
29.9 L
Transmission
16 forward and reverse
Operating Weight
2348 to 3031 pounds
Overview
![]() | 1989 - 1992
Landleader TA7 SeriesCompact Utility tractor
Landleader TA7 Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Variants | |
|---|---|
TA267F | 4WD |
Iseki TA267 Engine | |
|---|---|
Iseki 1.5L 3-cyl diesel | |
Fuel tank | 7.9 gal
29.9 L |
Engine details ... | |
Iseki TA267 Transmission | |
|---|---|
16-speed | |
Transmission details ... |
Iseki TA267 Power | |
|---|---|
Engine | 25.6 hp
19.1 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Open operator station. Cab optional. |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 565@2500 |
733@2500 | |
1060@2500 | |
1244@2500 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 63.6 inches
161 cm |
Weight | 2348 to 3031 pounds |
Front tire | 5.00-15 |
2WD Rear tire | 11.2-24 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
![]() | |
Land Leader 7 Series published in 1993, by Iseki |
Engine
Engine Detail — 91.4 ci / 1.5 L Diesel
Manufacturer | Iseki E3ADI |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 91.4 ci
1.5 L |
Bore/Stroke | 3.43x3.31 inches
87 x 84 mm |
Power | 25.6 hp
19.1 kW |
Rated RPM | 2500 |
Starter | electric |
Starter volts | 12 |
Oil capacity | 5.1 qts
4.8 L |
Iseki TA267 Engine | |
|---|---|
![]() |
Transmission
Transmission — 16 forward and reverse
Gears | 16 forward and reverse |
Four gears (1-4) in four ranges with shuttle shift. | |
![]() | |
Dimensions
Iseki TA267 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 5.00-15. Rear: 11.2-24 |
4WD Standard tires (ag) | Front: 7-16. Rear: 11.2-24 |
Dimensions | |
|---|---|
Wheelbase | 63.6 inches
161 cm |
Length | 117.3 inches
297 cm |
Width | 52 inches
132 cm |
Height (steering wheel) | 56.7 inches
144 cm |
Height (cab) | 78 inches
198 cm |
Ground clearance | 13 inches
33 cm |
2WD Front tread | 38.6 to 50.4 inches
98 to 128 cm |
4WD Front tread | 42.1 inches
106 cm |
Rear tread | 40.2 to 48 inches
102 to 121 cm |
Iseki TA267 Weight | |
|---|---|
2WD Open | 2348 lbs
1065 kg |
4WD Open | 2546 lbs
1154 kg |
2WD Cab | 2833 lbs
1285 kg |
4WD Cab | 3031 lbs
1374 kg |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki TA267 based on its 25.6 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TA267.
Estimated Continuous Field Runtime: 5.9 hrs
Approximately 5.9 hours of continuous field operation at ~75% rated power on a full tank (7.9 gal / 29.9 L).
Estimated 75% Load Fuel Burn~1.3 gal/hr (5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki TA267 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TA267.
Converted Equivalents:
Horsepower (HP)25.6 hp
Kilowatts (kW)19.1 kW
Metric Horsepower (PS / CV)26 PS
Direct Competitor Comparison
Compare Iseki TA267 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki TA267
Engine Power:Diesel (listed): 25.6 hp / 19.1 kW
★ Baseline Reference
Related models
Iseki TF21F
- Power:
- 20.7
- Production years:
- 1995 - 2005
Iseki TL2101
- Power:
- 20.7
- Production years:
- 1980 - 1985
Iseki TPC213
- Power:
- 20.7
- Production years:
- 2019 - 2026
Iseki TU2100
- Power:
- 20.7
- Production years:
- 1981 - 1984
Iseki TU2101
- Power:
- 20.7
- Production years:
- 1984 - 1994




