Iseki TD4410

The Iseki TD4410 is a tractor produced by Iseki. It is equipped with a 121.7 ci 2.0 L engine. The listed engine power is Diesel (listed): 44 hp / 32.8 kW. Transmission: 18 forward and 6 reverse. Operating weight: 3502 to 3789 pounds.

Engine Power
Diesel (listed): 44 hp / 32.8 kW
Fuel & Capacities
13.2 gal 50.0 L
Transmission
18 forward and 6 reverse
Operating Weight
3502 to 3789 pounds

Overview

Iseki TD4410 tractor photo
Compact Utility tractor
Compact Utility tractor
Production
Manufacturer
Iseki
Compact Utility tractor
Iseki TD4410 Engine
Isuzu 2.0L 4-cyl diesel
Fuel tank
13.2 gal 50.0 L
Engine details ...
Iseki TD4410 Transmission
18-speed synchromesh
Transmission details ...
Iseki TD4410 Power
Engine
44 hp 32.8 kW
PTO (claimed)
38 hp 28.3 kW
Mechanical
Two- or four-wheel drive
Power steering
Wet disc brakes
Open operator station. Two-post fixed ROPS available.
Hydraulics
Type
open center
Pressure
2275 psi 156.9 bar
Pump flow
8.45 gpm 32.0 lpm
Tractor hitch
Rear Type
I
Control
position and draft control
Rear lift (at ends)
3250 lbs 1474 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540/1000
Engine RPM
540@2250
1000@2250
Dimensions & Tires
Wheelbase
76.3 inches 193 cm
Weight
3502 to 3789 pounds
Front tire
6.00-16
2WD Rear tire
13.6-28
Full dimensions and tires ...
References
TD4410 references literature
Model TD4410 - TD4450 published by Iseki

Engine

Engine Detail — 121.7 ci / 2.0 L Diesel

Manufacturer
Isuzu 4FC1
Fuel Type
Diesel
Configuration
4-cylinder, liquid-cooled
Displacement
121.7 ci 2.0 L
Bore/Stroke
3.31x3.54 inches 84 x 90 mm
Power
44 hp 32.8 kW
Air cleaner
dry
Rated RPM
2600
Torque
90.4 lb-ft 122.6 Nm
Torque RPM
1400
Starter
electric
Starter volts
12

Transmission

Transmission — 18 forward and 6 reverse synchromesh

Type
synchromesh
Gears
18 forward and 6 reverse
Clutch
260mm dry disc
Three gears, plus reverse in three ranges plus creeper range.
TD4410  synchromesh speeds

Dimensions

Iseki TD4410 Tires
2WD Standard tires (ag)
Front: 6.00-16. Rear: 13.6-28
4WD Standard tires (ag)
Front: 8.00-18. Rear: 13.6-28
Dimensions
Wheelbase
76.3 inches 193 cm
Length
134.2 inches 340 cm
Width
61.4 inches 155 cm
Height
86.6 inches 219 cm
Height (steering wheel)
57.8 inches 146 cm
2WD Weight
3502 lbs 1588 kg
4WD Weight
3789 lbs 1718 kg
Ground clearance
13.5 inches 34 cm
Clearance (drawbar)
12.25 inches 31 cm
2WD Front tread
45.3 to 61 inches 115 to 154 cm
4WD Front tread
43 to 63.8 inches 109 to 162 cm
Rear tread
48 to 63.8 inches 121 to 162 cm

Photos

Iseki TD4410 tractor photo

Iseki TD4410 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Iseki TD4410 based on its 44 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)Medium DutyStandard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing
6 ft (72 in)1.8 mMedium DutyMedium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep
66 to 72 in165 - 180 cmMedium DutyStandard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage
7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙Medium DutyField leveling and clod breaking behind plows.
Hay BalerHay & Forage
Small Square Baler (14x18")小方捆打捆机 (36x46 cm)Medium DutyClassic 2-string baler for horse and small livestock hay.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TD4410.

Estimated Continuous Field Runtime: 5.8 hrs

Approximately 5.8 hours of continuous field operation at ~75% rated power on a full tank (13.2 gal / 50 L).

Estimated 75% Load Fuel Burn~2.3 gal/hr (8.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Iseki TD4410 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TD4410.

Converted Equivalents:

Horsepower (HP)44 hp
Kilowatts (kW)32.8 kW
Metric Horsepower (PS / CV)44.6 PS

Direct Competitor Comparison

Compare Iseki TD4410 against same-era industry alternatives in the same horsepower class.

Current Model
Iseki

Iseki TD4410

Engine Power:Diesel (listed): 44 hp / 32.8 kW
★ Baseline Reference
Massey FergusonMarket Competitor

Massey Ferguson 1260

Engine Power:40
Production Years:1992 - 2002
International HarvesterMarket Competitor

International Harvester 383

Engine Power:40
Production Years:1982 - 1984
KiotiMarket Competitor

Kioti CK4010

Engine Power:39.6
Production Years:2015 - 2025
BobcatMarket Competitor

Bobcat CT2040

Engine Power:39.6
Production Years:2019 - 2026