Iseki TD4450

The Iseki TD4450 is a tractor produced by Iseki. It is equipped with a 144.6 ci 2.4 L engine. The listed engine power is Diesel (listed): 48 hp / 35.8 kW. Transmission: 18 forward and 6 reverse. Operating weight: 3679 to 3965 pounds.

Engine Power
Diesel (listed): 48 hp / 35.8 kW
Fuel & Capacities
13.2 gal 50.0 L
Transmission
18 forward and 6 reverse
Operating Weight
3679 to 3965 pounds

Overview

Iseki TD4450 tractor photo
Compact Utility tractor
Compact Utility tractor
Production
Manufacturer
Iseki
Compact Utility tractor
Variants
Field Boss 43
similar White model
Iseki TD4450 Engine
Isuzu 2.4L 4-cyl diesel
Fuel tank
13.2 gal 50.0 L
Engine details ...
Iseki TD4450 Transmission
18-speed synchromesh
Transmission details ...
Iseki TD4450 Power
Engine
48 hp 35.8 kW
PTO (claimed)
41 hp 30.6 kW
Mechanical
Two- or four-wheel drive
Power steering
Wet disc brakes
Open operator station. Two-post fixed ROPS available.
Hydraulics
Type
open center
Pump flow
8.45 gpm 32.0 lpm
Tractor hitch
Rear Type
I
Control
position and draft control
Rear lift (at ends)
3630 lbs 1646 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540/1000
Engine RPM
540@2250
1000@2250
Dimensions & Tires
Wheelbase
78.7 inches 199 cm
Weight
3679 to 3965 pounds
Front tire
6.00-16
2WD Rear tire
12.4-32
Full dimensions and tires ...
References
TD4450 references literature
Model TD4410 - TD4450 published by Iseki
Tractors TD4450 published by Iseki

Engine

Engine Detail — 144.6 ci / 2.4 L Diesel

Manufacturer
Isuzu C240
Fuel Type
Diesel
Configuration
4-cylinder, liquid-cooled
Displacement
144.6 ci 2.4 L
Bore/Stroke
3.39x4.02 inches 86 x 102 mm
Power
48 hp 35.8 kW
Air cleaner
dry
Rated RPM
2600
Torque
97.4 lb-ft 132.1 Nm
Torque RPM
1400
Starter
electric
Starter volts
12

Transmission

Transmission — 18 forward and 6 reverse synchromesh

Type
synchromesh
Gears
18 forward and 6 reverse
Clutch
260mm dry disc
Three gears, plus reverse in three ranges plus creeper range.
TD4450  synchromesh speeds

Dimensions

Iseki TD4450 Tires
2WD Standard tires (ag)
Front: 6.00-16. Rear: 12.4-32
4WD Standard tires (ag)
Front: 8.30-20. Rear: 12.4-32
Dimensions
Wheelbase
78.7 inches 199 cm
Length
134.2 inches 340 cm
Width
61 inches 154 cm
Height
90.2 inches 229 cm
Height (steering wheel)
59 inches 149 cm
2WD Weight
3679 lbs 1668 kg
4WD Weight
3965 lbs 1798 kg
Ground clearance
16.5 inches 41 cm
Clearance (drawbar)
15.25 inches 38 cm
2WD Front tread
45.3 to 65 inches 115 to 165 cm
4WD Front tread
43 to 63.8 inches 109 to 162 cm
Rear tread
48.75 to 64.5 inches 123 to 163 cm

Photos

Iseki TD4450 tractor photo

Iseki TD4450 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Iseki TD4450 based on its 48 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)Medium DutyStandard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing
6 ft (72 in)1.8 mMedium DutyMedium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep
66 to 72 in165 - 180 cmMedium DutyStandard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage
7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙Medium DutyField leveling and clod breaking behind plows.
Hay BalerHay & Forage
Small Square Baler (14x18")小方捆打捆机 (36x46 cm)Medium DutyClassic 2-string baler for horse and small livestock hay.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TD4450.

Estimated Continuous Field Runtime: 5.3 hrs

Approximately 5.3 hours of continuous field operation at ~75% rated power on a full tank (13.2 gal / 50 L).

Estimated 75% Load Fuel Burn~2.5 gal/hr (9.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Iseki TD4450 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TD4450.

Converted Equivalents:

Horsepower (HP)48 hp
Kilowatts (kW)35.8 kW
Metric Horsepower (PS / CV)48.7 PS

Direct Competitor Comparison

Compare Iseki TD4450 against same-era industry alternatives in the same horsepower class.

Current Model
Iseki

Iseki TD4450

Engine Power:Diesel (listed): 48 hp / 35.8 kW
★ Baseline Reference
KubotaMarket Competitor

Kubota L4330

Engine Power:43.2
Production Years:2003 - 2007
DeereMarket Competitor

Deere 1550

Engine Power:43.4
Production Years:1987 - 1994
Massey FergusonMarket Competitor

Massey Ferguson 1643

Engine Power:43.5
Production Years:2009 - 2013
International HarvesterMarket Competitor

International Harvester 500

Engine Power:43.5
Production Years:1965 - 1969