Iseki TH24
The Iseki TH24 is a tractor produced by Iseki. It is equipped with a 89.3 ci 1.5 L engine. The listed engine power is Diesel (listed): 23.7 hp / 17.7 kW. Transmission: 12 forward and reverse. Operating weight: 1896 to 2348 pounds.
Engine Power
Diesel (listed): 23.7 hp / 17.7 kW
Fuel & Capacities
6.6 gal
25.0 L
Transmission
12 forward and reverse
Operating Weight
1896 to 2348 pounds
Overview
![]() | 2004 - 2010
TH SeriesCompact Utility tractor
TH Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Iseki TH24 Engine | |
|---|---|
Iseki 1.5L 3-cyl diesel | |
Fuel tank | 6.6 gal
25.0 L |
Engine details ... | |
Iseki TH24 Transmission | |
|---|---|
12-speed gear | |
Transmission details ... |
Iseki TH24 Power | |
|---|---|
Engine | 23.7 hp
17.7 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Wet disc brakes | |
Two-post folding ROPS. Cab optional with air-conditioning. |
Tractor hitch | |
|---|---|
Rear Type | JIS0 |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 523@2500 |
829@2500 | |
1218@2500 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 57.1 inches
145 cm |
Weight | 1896 to 2348 pounds |
Front tire | 6-14 |
Rear tire | 9.5-22 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
![]() | |
Operator's Manual TH Series (1716-912-003-5G) published in 2004 | |
TH Series - Sial Hunter published in 2006, by Iseki |
Engine
Engine Detail — 89.3 ci / 1.5 L Diesel
Manufacturer | Iseki E3CF |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 89.3 ci
1.5 L |
Bore/Stroke | 3.39x3.30 inches
86 x 84 mm |
Power | 23.7 hp
17.7 kW |
Rated RPM | 2500 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — 12 forward and reverse gear
Type | gear |
Gears | 12 forward and reverse |
Clutch | dry disc |
Four gears in three ranges with mechanical shuttle. | |
![]() | |
Dimensions
Iseki TH24 Tires | |
|---|---|
Standard tires (ag) | Front: 6-14. Rear: 9.5-22 |
Dimensions | |
|---|---|
Wheelbase | 57.1 inches
145 cm |
ROPS Length | 105.9 inches
268 cm |
Cab Length | 108.3 inches
275 cm |
ROPS Width | 46.5 inches
118 cm |
Cab Width | 49 inches
124 cm |
Height (ROPS) | 75.6 inches
192 cm |
ROPS Weight | 1896 lbs
860 kg |
Cab Weight | 2348 lbs
1065 kg |
Ground clearance | 13.6 inches
34 cm |
Front tread | 37.8 inches
96 cm |
Rear tread | 34.7/40.8 inches
88/103 cm |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki TH24 based on its 23.7 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TH24.
Estimated Continuous Field Runtime: 5.4 hrs
Approximately 5.4 hours of continuous field operation at ~75% rated power on a full tank (6.6 gal / 25 L).
Estimated 75% Load Fuel Burn~1.2 gal/hr (4.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki TH24 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TH24.
Converted Equivalents:
Horsepower (HP)23.7 hp
Kilowatts (kW)17.7 kW
Metric Horsepower (PS / CV)24 PS
Direct Competitor Comparison
Compare Iseki TH24 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki TH24
Engine Power:Diesel (listed): 23.7 hp / 17.7 kW
★ Baseline Reference
Related models
Iseki TL1900
- Power:
- 19
- Production years:
- 1980 - 1985
Iseki TF193
- Power:
- 19.2
Iseki TM3200
- Power:
- 19.2
- Production years:
- 2004 - 2010
Iseki TM3215
- Power:
- 19.2
- Production years:
- 2010 - 2020
Iseki RTS20
- Power:
- 19.7
- Production years:
- 2016 - 2023



