Iseki TH4260
The Iseki TH4260 is a tractor produced by Iseki. It is equipped with a 82.3 ci 1.3 L engine. The listed engine power is Diesel (listed): 23.7 hp / 17.7 kW. Transmission: hydrostatic. Operating weight: 2105 to 2161 pounds.
Engine Power
Diesel (listed): 23.7 hp / 17.7 kW
Fuel & Capacities
6.1 gal
23.1 L
Transmission
hydrostatic
Operating Weight
2105 to 2161 pounds
Overview
![]() | 2004 - 2008
TH SeriesCompact Utility tractor
TH Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Iseki TH4260 Engine | |
|---|---|
Iseki 1.3L 3-cyl diesel | |
Fuel tank | 6.1 gal
23.1 L |
Engine details ... | |
Iseki TH4260 Transmission | |
|---|---|
9-speed | |
Transmission details ... |
Iseki TH4260 Power | |
|---|---|
Engine | 23.7 hp
17.7 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Differential lock | mechanical rear |
Power steering | |
Wet disc brakes | |
Two-post folding ROPS. | |
Hydraulics | |
|---|---|
Type | open center |
Total flow | 7.4 gpm
28.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | I |
Rear lift (at ends) | 2425 lbs
1099 kg |
Power Take-off (PTO) | |
|---|---|
Hydro Rear PTO | independent |
Clutch | electro-hydraulic |
Gear Rear PTO Type | 540 |
Hydro Rear PTO Type | 540/1000 |
Engine RPM | 540@2324 |
1000@2381 | |
Front PTO Type | 2000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 65.6 inches
166 cm |
Weight | 2105 to 2161 pounds |
Front tire | 7-14 |
Rear tire | 9.5-24 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 40 |
Battery volts | 12 |
References | |
|---|---|
![]() | |
Iseki Product Guide published in 2005 |
Engine
Engine Detail — 82.3 ci / 1.3 L Diesel
Manufacturer | Iseki |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 82.3 ci
1.3 L |
Power | 23.7 hp
17.7 kW |
Fuel system | indirect injection |
Rated RPM | 2500 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — 9 forward and 3 reverse
Gears | 9 forward and 3 reverse |
Transmission — hydrostatic
Transmission | hydrostatic |
Gears | infinite forward and reverse |
![]() | |
Dimensions
Iseki TH4260 Tires | |
|---|---|
Ag front | 7-14 |
Ag rear | 9.5-24 |
Lawn/turf front | 24x8.50-12 |
Lawn/turf rear | 315/80D-16 |
Lawn/turf front | 26x12.00-12 |
Lawn/turf rear | 13.6-16 |
Dimensions | |
|---|---|
Wheelbase | 65.6 inches
166 cm |
Length | 115.2 inches
292 cm |
Gear Width | 52.4 inches
133 cm |
Hydro Width | 49.6 inches
125 cm |
Height (steering wheel) | 54 inches
137 cm |
Height (ROPS) | 92.5 inches
234 cm |
Gear Weight | 2105 lbs
954 kg |
Hydro Weight | 2161 lbs
980 kg |
Ground clearance | 7.7 inches
19 cm |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki TH4260 based on its 23.7 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TH4260.
Estimated Continuous Field Runtime: 4.9 hrs
Approximately 4.9 hours of continuous field operation at ~75% rated power on a full tank (6.1 gal / 23.1 L).
Estimated 75% Load Fuel Burn~1.2 gal/hr (4.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki TH4260 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TH4260.
Converted Equivalents:
Horsepower (HP)23.7 hp
Kilowatts (kW)17.7 kW
Metric Horsepower (PS / CV)24 PS
Direct Competitor Comparison
Compare Iseki TH4260 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki TH4260
Engine Power:Diesel (listed): 23.7 hp / 17.7 kW
★ Baseline Reference
Related models
Iseki TL1900
- Power:
- 19
- Production years:
- 1980 - 1985
Iseki TF193
- Power:
- 19.2
Iseki TM3200
- Power:
- 19.2
- Production years:
- 2004 - 2010
Iseki TM3215
- Power:
- 19.2
- Production years:
- 2010 - 2020
Iseki RTS20
- Power:
- 19.7
- Production years:
- 2016 - 2023



