Iseki TM3265
The Iseki TM3265 is a tractor produced by Iseki. It is equipped with a 91.4 ci 1.5 L engine. The listed engine power is Diesel (listed): 25.7 hp / 19.2 kW. Transmission: infinite forward and reverse (3-range). Operating weight: 1896 lbs (gear) 860 kg.
Engine Power
Diesel (listed): 25.7 hp / 19.2 kW
Fuel & Capacities
7.4 gal
28.0 L
Transmission
infinite forward and reverse (3-range)
Operating Weight
1896 lbs (gear)
860 kg
Overview
 | 2010 -
TM SeriesCompact Utility tractor |
|---|---|
2010 - | |
TM Series | |
Compact Utility tractor | |
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Iseki TM3265 Engine | |
|---|---|
Iseki 1.5L 3-cyl diesel | |
Fuel tank | 7.4 gal
28.0 L |
Engine details ...  | |
Iseki TM3265 Power | |
|---|---|
Engine | 25.7 hp
19.2 kW |
PTO (claimed) | 20.1 hp
15.0 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Differential lock | standard |
Steering | hydrostatic power |
Wet disc brakes | |
Two-post ROPS. | |
Hydraulics | |
|---|---|
Type | open center |
Pump flow | 5.52 gpm
20.9 lpm |
Tractor hitch | |
|---|---|
Rear Type | I |
Control | position control |
Rear lift | 1323 lbs
600 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent (hydro) |
Clutch | mechanical (gear) |
electro-hydraulic (hydro) | |
Rear PTO Type | 540 (1.375) |
Engine RPM | 567@2600 (gear) |
571@2600 (hydro) | |
Mid PTO Type | 2000 |
Engine RPM | 2032@2600 (gear) |
2129@2600 (hydro) | |
Dimensions & Tires | |
|---|---|
Wheelbase | 61.42 inches
156 cm |
Weight | 1896 to 1907 pounds |
Front tire | 6-12 |
Rear tire | 9.5-18 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
Engine
Engine Detail — 91.4 ci / 1.5 L Diesel
Manufacturer | Iseki E3CD |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 91.4 ci
1.5 L |
Bore/Stroke | 3.43x3.30 inches
87 x 84 mm |
Power | 25.7 hp
19.2 kW |
Rated RPM | 2600 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
8-speed gear | |
hydrostatic |
Transmission — 8 forward and reverse gear
Type | gear |
Gears | 8 forward and reverse |
Transmission — infinite forward and reverse (3-range) hydrostatic
Type | hydrostatic |
Gears | infinite forward and reverse (3-range) |
Dimensions
Iseki TM3265 Tires | |
|---|---|
Ag front | 6-12 |
Ag rear | 9.5-18 |
Lawn/turf front | 24x10.50-12 |
Lawn/turf rear | 315/75D-15 |
Dimensions | |
|---|---|
Wheelbase | 61.42 inches
156 cm |
Length | 113 inches
287 cm |
Width | 43.7 inches
110 cm |
Weight | 1896 lbs (gear)
860 kg |
1907 lbs (hydro)
865 kg | |
Ground clearance | 9.8 inches
24 cm |
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki TM3265 based on its 25.7 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TM3265.
Estimated Continuous Field Runtime: 5.5 hrs
Approximately 5.5 hours of continuous field operation at ~75% rated power on a full tank (7.4 gal / 28 L).
Estimated 75% Load Fuel Burn~1.3 gal/hr (5.1 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki TM3265 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TM3265.
Converted Equivalents:
Horsepower (HP)25.7 hp
Kilowatts (kW)19.2 kW
Metric Horsepower (PS / CV)26.1 PS
Direct Competitor Comparison
Compare Iseki TM3265 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki TM3265
Engine Power:Diesel (listed): 25.7 hp / 19.2 kW
★ Baseline Reference
Related models
Iseki TF21F
- Power:
- 20.7
- Production years:
- 1995 - 2005
Iseki TL2101
- Power:
- 20.7
- Production years:
- 1980 - 1985
Iseki TPC213
- Power:
- 20.7
- Production years:
- 2019 - 2026
Iseki TU2100
- Power:
- 20.7
- Production years:
- 1981 - 1984
Iseki TU2101
- Power:
- 20.7
- Production years:
- 1984 - 1994