Iseki TS3110
The Iseki TS3110 is a tractor produced by Iseki. It is equipped with a 91.4 ci 1.5 L engine. The listed engine power is Diesel (listed): 30.6 hp / 22.8 kW. Transmission: 18 forward and 6 reverse. Operating weight: 2513 to 2976 pounds.
Engine Power
Diesel (listed): 30.6 hp / 22.8 kW
Fuel & Capacities
7.9 gal
29.9 L
Transmission
18 forward and 6 reverse
Operating Weight
2513 to 2976 pounds
Overview
 | 1976 - 1980
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Variants | |
|---|---|
TS3110F | 4WD |
Iseki TS3110 Engine | |
|---|---|
Iseki 1.5L 3-cyl diesel | |
Fuel tank | 7.9 gal
29.9 L |
Engine details ...  | |
Iseki TS3110 Power | |
|---|---|
Engine | 30.6 hp
22.8 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive |
Tractor hitch | |
|---|---|
Rear Type | I |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 630@2500 |
773@2500 | |
990@2500 | |
1547@2500 | |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 68.9 inches
175 cm |
4WD Wheelbase | 70.1 inches
178 cm |
Weight | 2513 to 2976 pounds |
Front tire | 5.00-15 |
2WD Rear tire | 12.4/11-24 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
 | |
TS3110 published by Iseki |
Engine
Engine Detail — 91.4 ci / 1.5 L Diesel
Manufacturer | Iseki |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 91.4 ci
1.5 L |
Power | 30.6 hp
22.8 kW |
Rated RPM | 2500 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
9-speed | |
18-speed creeper |
Transmission — 9 forward and 3 reverse
Gears | 9 forward and 3 reverse |
 | |
Transmission | |
Type | creeper |
Gears | 18 forward and 6 reverse |
Dimensions
Iseki TS3110 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 5.00-15. Rear: 12.4/11-24 |
4WD Standard tires (ag) | Front: 6.00-16. Rear: 12.4/11-24 |
Dimensions | |
|---|---|
2WD Wheelbase | 68.9 inches
175 cm |
4WD Wheelbase | 70.1 inches
178 cm |
Length | 122.1 inches
310 cm |
Width | 57.9 inches
147 cm |
Height | 78.4 inches
199 cm |
2WD Weight | 2513 lbs
1139 kg |
4WD Weight | 2976 lbs
1349 kg |
2WD Ground clearance | 14.2 inches
36 cm |
4WD Ground clearance | 12.6 inches
32 cm |
Photos
Iseki TS3110
Iseki TS3110
Iseki TS3110
Iseki TS3110, right-rear view.
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki TS3110 based on its 30.6 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TS3110.
Estimated Continuous Field Runtime: 5 hrs
Approximately 5 hours of continuous field operation at ~75% rated power on a full tank (7.9 gal / 29.9 L).
Estimated 75% Load Fuel Burn~1.6 gal/hr (6 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki TS3110 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TS3110.
Converted Equivalents:
Horsepower (HP)30.6 hp
Kilowatts (kW)22.8 kW
Metric Horsepower (PS / CV)31 PS
Direct Competitor Comparison
Compare Iseki TS3110 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki TS3110
Engine Power:Diesel (listed): 30.6 hp / 22.8 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 323
Engine Power:27.6
Production Years:1966 - 1975
Related models
Iseki AT25
- Power:
- 24.7
- Production years:
- 2004 - 2009
Iseki RTS25
- Power:
- 24.7
- Production years:
- 2016 - 2023
Iseki RTS255
- Power:
- 24.7
- Production years:
- 2023 - 2026
Iseki TG253
- Power:
- 24.7
- Production years:
- 1994 - 2004
Iseki TH25
- Power:
- 24.7
- Production years:
- 2004 - 2010