Iseki TS3510
The Iseki TS3510 is a tractor produced by Iseki. It is equipped with a 108.4 ci 1.8 L engine. The listed engine power is Diesel (listed): 34.5 hp / 25.7 kW. Transmission: 16 forward and 4 reverse. Operating weight: 3000 lbs 1360 kg.
Engine Power
Diesel (listed): 34.5 hp / 25.7 kW
Fuel & Capacities
7.9 gal
29.9 L
Transmission
16 forward and 4 reverse
Operating Weight
3000 lbs
1360 kg
Overview
 | 1976 - 1980
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Variants | |
|---|---|
TS3510F | 4WD |
Iseki TS3510 Engine | |
|---|---|
Isuzu 1.8L 3-cyl diesel | |
Fuel tank | 7.9 gal
29.9 L |
Engine details ...  | |
Iseki TS3510 Power | |
|---|---|
Engine | 34.5 hp
25.7 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Wet disc brakes | |
Open operator station. |
Tractor hitch | |
|---|---|
Rear Type | I |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 582@2400 |
714@2400 | |
914@2400 | |
1429@2400 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 68.9 inches
175 cm |
Weight | 3000 lbs
1360 kg |
Front tire | 5.50-16 |
Rear tire | 13.6/12-24 |
Full dimensions and tires ...  | |
References | |
|---|---|
 | |
Technical Annual published in 1983, by Power Farming | |
TS & TX Series published in 1975, by Iseki | |
TS3510-TS2810-TS2510 published in 1976, by Iseki | |
TS3510 published by Iseki | |
TS3510 |
Engine
Engine Detail — 108.4 ci / 1.8 L Diesel
Manufacturer | Isuzu 3AB1 |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Sales documents from Australia and New Zealand show the 1.5L Isuzu 3AD1 installed on the TS3510, also at 35 horsepower. European and Japanese sources show the larger 3AB1. | |
Displacement | 108.4 ci
1.8 L |
Bore/Stroke | 3.39x4.02 inches
86 x 102 mm |
Power | 34.5 hp
25.7 kW |
Rated RPM | 2400 |
Torque | 79.6 lb-ft
107.9 Nm |
Torque RPM | 1600 |
Starter type | electric |
Transmission
Transmission options | |
|---|---|
8-speed gear | |
16-speed creeper |
Transmission — 8 forward and 2 reverse gear
Type | gear |
Gears | 8 forward and 2 reverse |
 | |
Transmission | |
Type | creeper |
Gears | 16 forward and 4 reverse |
Dimensions
Iseki TS3510 Tires | |
|---|---|
Ag front | 5.50-16 |
Ag rear | 13.6/12-24 |
Dimensions | |
|---|---|
Wheelbase | 68.9 inches
175 cm |
Length | 122.4 inches
310 cm |
Width | 60.6 inches
153 cm |
Height | 85.6 inches
217 cm |
Weight | 3000 lbs
1360 kg |
Ground clearance | 15 inches
38 cm |
Front tread | 46.1 to 54 inches
117 to 137 cm |
Rear tread | 47.2 to 57.1 inches
119 to 145 cm |
Photos
Iseki TS3510 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki TS3510 based on its 34.5 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TS3510.
Estimated Continuous Field Runtime: 4.4 hrs
Approximately 4.4 hours of continuous field operation at ~75% rated power on a full tank (7.9 gal / 29.9 L).
Estimated 75% Load Fuel Burn~1.8 gal/hr (6.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki TS3510 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TS3510.
Converted Equivalents:
Horsepower (HP)34.5 hp
Kilowatts (kW)25.7 kW
Metric Horsepower (PS / CV)35 PS
Direct Competitor Comparison
Compare Iseki TS3510 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki TS3510
Engine Power:Diesel (listed): 34.5 hp / 25.7 kW
★ Baseline Reference
General OrdnanceMarket Competitor
General Ordnance 14-28
Engine Power:31.1
Production Years:1919 - 1920
Related models
Iseki AT280
- Power:
- 27.6
- Production years:
- 2010 - 2012
Iseki TA287
- Power:
- 27.6
- Production years:
- 1989 - 1992
Iseki TF327
- Power:
- 27.6
- Production years:
- 2003 - 2013
Iseki TH4290
- Power:
- 27.6
- Production years:
- 2004 - 2008
Iseki TS2800
- Power:
- 28