J.I. Case 4496
The J.I. Case 4496 is a tractor produced by J I Case. It is equipped with a 673 ci 11.0 L engine. The listed engine power is Diesel (listed): 213 hp / 158.8 kW. Transmission: 12 forward and 4 reverse. Drive type: 4x4 4WD.
Engine Power
Diesel (listed): 213 hp / 158.8 kW
Drive & Traction
4x4 4WD
Fuel & Capacities
132.1 gal
500.0 L
Transmission
12 forward and 4 reverse
Overview
 | 1981 - 1983
Four-wheel Drive (4WD) tractor |
|---|
Production | |
|---|---|
Manufacturer | J.I. Case |
Four-wheel Drive (4WD) tractor | |
Built in Brazil | |
J.I. Case 4496 Engine | |
|---|---|
Scania 11.0L 6-cyl diesel | |
Fuel tank | 132.1 gal
500.0 L |
Engine details ...  | |
J.I. Case 4496 Transmission | |
|---|---|
12-speed partial power shift | |
Transmission details ...  |
J.I. Case 4496 Power | |
|---|---|
Engine | 213 hp
158.8 kW |
PTO (claimed) | 176 hp
131.2 kW |
Mechanical | |
|---|---|
Drive | 4x4 4WD |
Steering | hydrostatic power, four-wheel steering |
Hydraulic dry disc brakes | |
Cab standard wth air-conditioning. | |
Tractor hitch | |
|---|---|
Rear Type | III (optional) |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
Front tire | 23.1x30 |
Rear tire | 23.1x30 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Charging system | alternator |
Charging amps | 72 |
Engine
Engine Detail — 673 ci / 11.0 L Diesel
Manufacturer | Scania D11 |
Fuel Type | Diesel |
Configuration | 6-cylinder, liquid-cooled |
Displacement | 673 ci
11.0 L |
Bore/Stroke | 5.00x5.71 inches
127 x 145 mm |
Power | 213 hp
158.8 kW |
Compression | 16:1 |
Rated RPM | 2200 |
Starter type | electric |
Transmission
Transmission — 12 forward and 4 reverse partial power shift
Type | partial power shift |
Gears | 12 forward and 4 reverse |
Four ranges with three power shift gears in each range. | |
Dimensions
J.I. Case 4496 Tires | |
|---|---|
Standard tires (ag) | Front: 23.1x30. Rear: 23.1x30 |
Optional tires (ag) | Front: 18.4x34. Rear: 18.4x34 |
Dimensions |
|---|
Recommended Implements & Sizing Guide
Engineering recommendations for J I Case J.I. Case 4496 based on its 213 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for J I Case J.I. Case 4496.
Estimated Continuous Field Runtime: 11.9 hrs
Approximately 11.9 hours of continuous field operation at ~75% rated power on a full tank (132.1 gal / 500.1 L).
Estimated 75% Load Fuel Burn~11.1 gal/hr (41.9 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
J I Case J.I. Case 4496 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for J I Case J.I. Case 4496.
Converted Equivalents:
Horsepower (HP)213 hp
Kilowatts (kW)158.8 kW
Metric Horsepower (PS / CV)216 PS
Direct Competitor Comparison
Compare J.I. Case 4496 against same-era industry alternatives in the same horsepower class.
Current Model
J I Case
J.I. Case 4496
Engine Power:Diesel (listed): 213 hp / 158.8 kW
★ Baseline Reference
Related models
J.I. Case 2390
- Power:
- 178.6
- Production years:
- 1979 - 1983
J.I. Case 2394
- Power:
- 197
- Production years:
- 1984 - 1984
J.I. Case 3294
- Power:
- 197
- Production years:
- 1984 - 1985
J.I. Case 1570
- Power:
- 200
- Production years:
- 1976 - 1978
J.I. Case 2590
- Power:
- 200
- Production years:
- 1979 - 1983