J.I. Case 570

The J.I. Case 570 is a tractor produced by J I Case. It is equipped with a 188.4 ci 3.1 L engine. The listed engine power is 41.27 hp 30.8 kW. Transmission: 8 forward and reverse. Operating weight: 3,900 lbs 1769 kg.

Engine Power
41.27 hp 30.8 kW
Fuel & Capacities
Diesel
Transmission
8 forward and reverse
Operating Weight
3,900 lbs 1769 kg

Overview

J.I. Case 570 tractor photo
1970 - 1973
Production
Manufacturer
J.I. Case
Built in Racine, Wisconsin, USA
Original price
$5,700 (1973)
The J.I. Case 570 is very similar to the J.I. Case 530 series tractors it replaced.
J.I. Case 570 Power
Plows
3-4
Drawbar (tested)
37.03 hp 27.6 kW
PTO (tested)
41.27 hp 30.8 kW
Performance test details ...
Mechanical
Two-wheel drive
Steering
hydrostatic power
Open operator station.
Hydraulics
Pump flow
9.3 gpm 35.2 lpm
Tractor hitch
Rear Type
I
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540
Dimensions & Tires
Weight
3,900 lbs 1769 kg
Full dimensions and tires ...
References
570 references literature
Buyers Guide for '70 published in 1970, by J.I. Case

Engine

Engine options
J.I. Case 2.6L 4-cyl gasoline
J.I. Case 3.1L 4-cyl diesel

Engine Detail — 158.7 ci / 2.6 L Gasoline

Manufacturer
J.I. Case
Fuel Type
Gasoline
Configuration
4-cylinder, liquid-cooled
Displacement
158.7 ci 2.6 L
Bore/Stroke
3.50x4.125 inches 89 x 105 mm
Compression
7.42:1
Rated RPM
1900
Coolant capacity
14 qts 13.2 L

Engine Detail — 188.4 ci / 3.1 L Diesel

Manufacturer
J.I. Case
Fuel Type
Diesel
Configuration
4-cylinder, liquid-cooled
Displacement
188.4 ci 3.1 L
Bore/Stroke
3.8125x4.125 inches 97 x 105 mm
Air cleaner
oil bath
Compression
17.5:1
Rated RPM
1900
Starter volts
12

Transmission

Transmission options
4-speed gear
8-speed gear
8-speed mechanical shuttle

Transmission — 4 forward and 1 reverse gear

Type
gear
Gears
4 forward and 1 reverse

Transmission — 8 forward and 2 reverse gear

Type
gear
Gears
8 forward and 2 reverse

Transmission — 8 forward and reverse mechanical shuttle

Type
mechanical shuttle
Gears
8 forward and reverse

Dimensions

J.I. Case 570 Tires
Dimensions
Weight
3,900 lbs 1769 kg

Tests

Tractor Tests
NTTL 771: gasoline 12-speed 2WD
NTTL 772: diesel 12-speed 2WD
Nebraska Tractor Test 771
Gasoline 12-speed 2WD October 11 - 27, 1960 Link: Nebraska Tractor Test 771 file
PTO performance
Power at rated engine speed
39.50 hp 29.5 kW
Fuel use
3.3 gal/hour 12.5 l/hour
Power at rated PTO speed
38.22 hp 28.5 kW
Fuel use
3.1 gal/hour 11.7 l/hour
Drawbar performance
Max power
32.85 hp 24.5 kW
Fuel use
3.2 gal/hour 12.1 l/hour
Gear 5 used for power test.
Max pull
5,834 lbs 2646 kg
Gear 1 used for pull test.
Nebraska Tractor Test 772
Diesel 12-speed 2WD October 12 - 27, 1960 Link: Nebraska Tractor Test 772 file
PTO performance
Power at rated engine speed
41.27 hp 30.8 kW
Fuel use
2.5 gal/hour 9.5 l/hour
Power at rated PTO speed
39.41 hp 29.4 kW
Fuel use
2.4 gal/hour 9.1 l/hour
Drawbar performance
Max power
37.03 hp 27.6 kW
Fuel use
2.4 gal/hour 9.1 l/hour
Gear 5 used for power test.
Max pull
6,124 lbs 2777 kg
Gear 1 used for pull test.

Recommended Implements & Sizing Guide

Engineering recommendations for J I Case J.I. Case 570 based on its 41.27 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)Medium DutyStandard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing
6 ft (72 in)1.8 mMedium DutyMedium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep
66 to 72 in165 - 180 cmMedium DutyStandard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage
7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙Medium DutyField leveling and clod breaking behind plows.
Hay BalerHay & Forage
Small Square Baler (14x18")小方捆打捆机 (36x46 cm)Medium DutyClassic 2-string baler for horse and small livestock hay.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for J I Case J.I. Case 570.

Estimated Continuous Field Runtime: 1.1 hrs

Approximately 1.1 hours of continuous field operation at ~75% rated power on a full tank (2.4 gal / 9.1 L).

Estimated 75% Load Fuel Burn~2.1 gal/hr (8.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

J I Case J.I. Case 570 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for J I Case J.I. Case 570.

Converted Equivalents:

Horsepower (HP)41.3 hp
Kilowatts (kW)30.8 kW
Metric Horsepower (PS / CV)41.8 PS

Direct Competitor Comparison

Compare J.I. Case 570 against same-era industry alternatives in the same horsepower class.

Current Model
J I Case

J.I. Case 570

Engine Power:41.27 hp 30.8 kW
★ Baseline Reference
DeereMarket Competitor

Deere 2038R

Engine Power:37.3
Production Years:2017 - 2026
KubotaMarket Competitor

Kubota KL380

Engine Power:37.4
Production Years:2006 - 2007
Massey FergusonMarket Competitor

Massey Ferguson 133

Engine Power:37.5
Production Years:1969 - 1974
International HarvesterMarket Competitor

International Harvester 276

Engine Power:37.5
Production Years:1966 - 1971