John Deere 2941

The John Deere 2941 is a tractor produced by John Deere. It is equipped with a 235.6 ci 3.9 L engine. The listed engine power is Diesel (listed): 95.2 hp / 71.0 kW. Transmission: 8 forward and 4 reverse. Operating weight: 9435 lbs 4279 kg.

Engine Power
Diesel (listed): 95.2 hp / 71.0 kW
Transmission
8 forward and 4 reverse
Operating Weight
9435 lbs (4WD ROPS) 4279 kg

Overview

John Deere 2941 tractor photo
1982 - 1987 41 SeriesUtility tractor 41 Series Utility tractor
Production
Manufacturer
John Deere
Utility tractor
Built in Nigel, South Africa
John Deere 2941 Engine
ADE 3.9L 4-cyl diesel
Engine details ...
John Deere 2941 Transmission
8-speed
Transmission details ...
John Deere 2941 Power
Engine
95.2 hp 71.0 kW
Mechanical
Two- or four-wheel drive
Power steering
Open operator station.
Power Take-off (PTO)
Rear PTO Type
540/1000
Dimensions & Tires
Weight
9435 lbs 4279 kg
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Battery volts
12

Engine

Engine Detail — 235.6 ci / 3.9 L Diesel

Manufacturer
ADE
Configuration
turbocharged diesel, 4-cylinder, liquid-cooled
Displacement
235.6 ci 3.9 L
Bore/Stroke
3.875x5.00 inches 98 x 127 mm
Power
95.2 hp 71.0 kW
Rated RPM
2300
Starter volts
12

Transmission

Transmission — 8 forward and 4 reverse

Gears
8 forward and 4 reverse

Dimensions

John Deere 2941 Tires
Dimensions
Operating weight
9435 lbs (4WD ROPS) 4279 kg
Ballasted weight
10650 lbs 4830 kg

Recommended Implements & Sizing Guide

Engineering recommendations for John Deere 2941 based on its 95.2 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)Heavy DutyHeavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing
10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼Heavy DutyWide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep
78 to 84 in200 - 215 cmHeavy DutyHeavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage
10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙Heavy DutyAggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage
5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机Heavy DutyHigh density baling; requires minimum 85 PTO HP.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 2941.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

John Deere 2941 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 2941.

Converted Equivalents:

Horsepower (HP)95.2 hp
Kilowatts (kW)71 kW
Metric Horsepower (PS / CV)96.5 PS

Direct Competitor Comparison

Compare John Deere 2941 against same-era industry alternatives in the same horsepower class.

Current Model
John Deere

John Deere 2941

Engine Power:Diesel (listed): 95.2 hp / 71.0 kW
★ Baseline Reference
KubotaMarket Competitor

Kubota MD87

Engine Power:85.8
Production Years:1995 - 2001
Massey FergusonMarket Competitor

Massey Ferguson 3308

Engine Power:86
Production Years:2021 - 2026
FordMarket Competitor

Ford 6610

Engine Power:86
Production Years:1988 - 1991
CaseIHMarket Competitor

CaseIH CS 86

Engine Power:86
Production Years:1995 - 2003