John Deere 4110
The John Deere 4110 is a tractor produced by John Deere. It is equipped with a 61.4 ci 1.0 L engine. The listed engine power is Diesel (net): 19 hp / 14.2 kW; Diesel (gross): 20 hp / 14.9 kW. Transmission: infinite forward and reverse (2-range). Operating weight: 780 lbs 353 kg.
Engine Power
Diesel (net): 19 hp / 14.2 kW; Diesel (gross): 20 hp / 14.9 kW
Fuel & Capacities
5.8 gal
22.0 L
Transmission
infinite forward and reverse (2-range)
Operating Weight
1517 lbs
688 kg
Overview
![]() | 2002 - 2006
4000 Ten Compact SeriesCompact Utility tractorYanmar built
4000 Ten Compact Series
Compact Utility tractor
Yanmar built |
|---|
Production | |
|---|---|
Distributor | John Deere |
Manufacturer | Yanmar |
Compact Utility tractor | |
Built in Japan | |
John Deere 4110 Engine | |
|---|---|
Yanmar 1.0L 3-cyl diesel | |
Engine details ... |
John Deere 4110 Power | |
|---|---|
Engine (gross) | 20 hp
14.9 kW |
Engine (net) | 19 hp
14.2 kW |
PTO (claimed) | 17 hp
12.7 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Final drives | spur gear |
Differential lock | mechanical rear |
Steering | power |
Two-post folding ROPS. | |
Capacity | |
|---|---|
Fuel | 5.8 gal
22.0 L |
Hydraulic system | 3.6 gal
13.6 L |
Front axle | 3.6 qts
3.4 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 3.6 gal
13.6 L |
Valves | 5 |
Pump flow | 5.1 gpm
19.3 lpm |
Tractor hitch | |
|---|---|
Rear Type | I |
Rear lift (at 24"/610mm) | 1150 lbs
521 kg |
Power Take-off (PTO) | |
|---|---|
Gear Rear PTO | transmission |
Hydro Rear PTO | independent |
Rear PTO Type | 540 |
Mid PTO | indpendent |
Mid PTO Type | 2100 |
Dimensions & Tires | |
|---|---|
Wheelbase | 58 inches
147 cm |
Weight | 1517 to 1579 pounds |
Front tire | 5.00-12 |
Rear tire | 9.5-16 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 20 |
Battery CCA | 435 |
Battery volts | 12 |
References | |
|---|---|
![]() | |
Operator's Manual 410 and 420 Loaders (OMC49370) published in 2005 | |
4000 TEN Series 18 To 48 HP published in 2001, by John Deere | |
The New John Deere 4000 TEN Series Tractors published in 2002 | |
4000 TEN Series - The tractor redefined published in 2001, by John Deere | |
4000 TEN Series Product Information Handbook published in 2003, by John Deere | |
Commercial & Consumer Equipment Purchase Guide published in 2005, by John Deere |
Engine
Engine Detail — 61.4 ci / 1.0 L Diesel
Manufacturer | Yanmar 3TNE74 |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 61.4 ci
1.0 L |
Bore/Stroke | 2.91x3.07 inches
74 x 78 mm |
Power (net) | 19 hp
14.2 kW |
Power (gross) | 20 hp
14.9 kW |
Air cleaner | dry |
Rated RPM | 2650 |
Starter volts | 12 |
Coolant capacity | 2.5 qts
2.4 L |
Oil capacity | 2.3 qts
2.2 L |
Transmission
Transmission options | |
|---|---|
8-speed unsynchronized gear | |
hydrostatic |
Transmission — 8 forward and 4 reverse unsynchronized gear
Type | unsynchronized gear | ||||
Gears | 8 forward and 4 reverse | ||||
Oil capacity | 14.4 qts
13.6 L | ||||
Oil type | 122o↔0oF [50o↔-17oC] : HY-GARD 80o↔-40oF [26o↔-40oC] : Low-viscosity HY-GARD | 122o↔0oF [50o↔-17oC] | : HY-GARD | 80o↔-40oF [26o↔-40oC] | : Low-viscosity HY-GARD |
122o↔0oF [50o↔-17oC] | : HY-GARD | ||||
80o↔-40oF [26o↔-40oC] | : Low-viscosity HY-GARD | ||||
Unsynchronized four-speed transmission with high, low, and reverse ranges. Tractor must be stopped, and clutch used, to shift ranges and gears. | |||||
With 9.5-16 rear tires. | |||||
![]() | |||||
122o↔0oF [50o↔-17oC] | : HY-GARD |
|---|---|
80o↔-40oF [26o↔-40oC] | : Low-viscosity HY-GARD |
Transmission — infinite forward and reverse (2-range) hydrostatic
Type | hydrostatic | ||||
Gears | infinite forward and reverse (2-range) | ||||
Oil capacity | 14 qts
13.2 L | ||||
Oil type | 122o↔0oF [50o↔-17oC] : HY-GARD 80o↔-40oF [26o↔-40oC] : Low-viscosity HY-GARD | 122o↔0oF [50o↔-17oC] | : HY-GARD | 80o↔-40oF [26o↔-40oC] | : Low-viscosity HY-GARD |
122o↔0oF [50o↔-17oC] | : HY-GARD | ||||
80o↔-40oF [26o↔-40oC] | : Low-viscosity HY-GARD | ||||
The 4110 has an optional two-range hydrostatic transmission controlled by forward and reverse foot pedals. The tractor must be stopped to shift between high and low ranges. | |||||
With 9.5-16 rear tires. | |||||
![]() | |||||
122o↔0oF [50o↔-17oC] | : HY-GARD |
|---|---|
80o↔-40oF [26o↔-40oC] | : Low-viscosity HY-GARD |
Dimensions
John Deere 4110 Tires | |
|---|---|
Ag front | 5.00-12 |
Ag rear | 9.5-16 |
Lawn/turf front | 23x8.50-12 |
Lawn/turf rear | 315/75D-15 |
Industrial rear | 12-16.5 |
Dimensions | |
|---|---|
Wheelbase | 58 inches
147 cm |
Length | 103 inches
261 cm |
Width | 47 inches
119 cm |
Height (hood) | 44 inches
111 cm |
Height (ROPS) | 78.9 inches
200 cm |
Gear Operating weight | 1517 lbs
688 kg |
Hydro Operating weight | 1579 lbs
716 kg |
Ground clearance | 9.5 inches
24 cm |
Attachments
Attachment overview | |
|---|---|
54" mid-mount mower deck | |
60" mid-mount mower deck | |
Front-end loader | |
Backhoe |
John Deere 46 Backhoe | |
|---|---|
Backhoe type | John Deere 46 Backhoe |
Weight | 780 lbs
353 kg |
Transport height | 60 inches
152 cm |
Bucket width | 9 inches
22 cm |
13 inches
33 cm | |
16 inches
40 cm | |
20 inches
50 cm | |
24 inches
60 cm | |
2-Foot flat digging depth | 78 inches
198 cm |
Reach from pivot | 101 inches
256 cm |
Loading height | 60 inches
152 cm |
Bucket Rotation | 180° |
Swing Arc | 180° |
Dipperstick force | 1250 lbs
567 kg |
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 4110.
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
John Deere 4110 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 4110.
Converted Equivalents:
Horsepower (HP)0 hp
Kilowatts (kW)0 kW
Metric Horsepower (PS / CV)0 PS
Direct Competitor Comparison
Compare John Deere 4110 against same-era industry alternatives in the same horsepower class.
Current Model
John Deere
John Deere 4110
Engine Power:Diesel (net): 19 hp / 14.2 kW; Diesel (gross): 20 hp / 14.9 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 8-16
Engine Power:17.8
Production Years:1917 - 1922
Related models
John Deere 655
- Power:
- 16
- Production years:
- 1986 - 1990
John Deere B
- Power:
- 16
- Production years:
- 1935 - 1952
John Deere 650
- Power:
- 17
- Production years:
- 1981 - 1988
John Deere 20C
- Power:
- 18.5
- Production years:
- 2009 - 2011
John Deere 4010
- Power:
- 18.5
- Production years:
- 2002 - 2005



