John Deere 5100MH

The John Deere 5100MH is a tractor produced by John Deere. It is equipped with a 276 ci 4.5 L engine. The listed engine power is Diesel (gross): 100 hp / 74.6 kW. Transmission: PowrReverser. Operating weight: 8300 to 9300 pounds.

Engine Power

Diesel (gross): 100 hp / 74.6 kW

Fuel & Capacities

37 gal 140.0 L

Transmission

PowrReverser

Operating Weight

8300 to 9300 pounds

Overview

	2012 - 2024 Model year 2012-20132014-2024 5M SeriesHigh-Clearance tractor 5M Series High-Clearance tractor

Production
Manufacturer	John Deere
High-Clearance tractor

John Deere 5100MH Engine
John Deere 4.5L 4-cyl diesel
Engine details ...

John Deere 5100MH Power
Engine (gross)	100 hp 74.6 kW
PTO (claimed)	85 hp 63.4 kW

Mechanical
Four-wheel drive
Final drives	inboard planetary
Power steering
Hydraulic wet disc brakes
Two-post ROPS. Cab optional.

Capacity
Fuel	37 gal 140.0 L
Hydraulic system	14 gal 53.0 L

Hydraulics
Type	open center
Capacity	14 gal 53.0 L
Pressure	2900 psi 200.0 bar
SCV flow	18.4 gpm 69.6 lpm
Total flow	24.7 gpm 93.5 lpm
Steering flow	6.3 gpm 23.8 lpm
Steering press.	1950 psi 134.5 bar

Tractor hitch
Rear Type	II

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic
Rear PTO Type	540/540E
Engine RPM	540@2100
	540E@1645

Dimensions & Tires
Wheelbase	90.6 inches 230 cm
Weight	8300 to 9300 pounds
Front tire	230/95R40
Rear tire	230/95R40
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	90
	120 *Available as a field-installed option.
Battery CCA	950
Battery volts	12

References

Specialty Tractors published in 2012, by John Deere

Engine

Engine Detail — 276 ci / 4.5 L Diesel

Manufacturer	John Deere
Configuration	turbocharged aftercooled diesel, 4-cylinder, liquid-cooled inline
Displacement	276 ci 4.5 L
Bore/Stroke	4.19x5.00 inches 106 x 127 mm
Emission control	Interim Tier IV
Rated Power (gross)	100 hp 74.6 kW
Rated RPM	2200
Idle RPM	900-2300
Starter	electric
Starter volts	12
Oil capacity	13.6 qts 12.9 L
Coolant capacity	20 qts 18.9 L

Transmission

Transmission options
12-speed
16-speed

Transmission — SyncShuttle Plus

Transmission	SyncShuttle Plus
Gears	12 forward and 4 reverse
Four gears (1-4) in three ranges (A-C), plus reverse range. Synchronized gear shifts and synchronized forward/reverse shifting.

Transmission — PowrReverser

Transmission	PowrReverser
Gears	16 forward and reverse
Four gears (1-4) in four ranges (A-D) with left-hand reverser lever. Gear shifts and ranges C/D shifts are synchronized. Power shuttle shifting.

Dimensions

John Deere 5100MH Tires
Ag front	230/95R40
Ag rear	230/95R40

Dimensions
Wheelbase	90.6 inches 230 cm
ROPS Shipping weight	8300 lbs 3764 kg
Cab Shipping weight	9300 lbs 4218 kg
Clearance (front axle)	23.4 inches 59 cm
Flange rear axle

John Deere 5100MH Height
Steering wheel	77 inches 195 cm
Hood	75 inches 190 cm
ROPS	110 inches 279 cm
Cab	110.7 inches 281 cm

Recommended Implements & Sizing Guide

Engineering recommendations for John Deere 5100MH based on its 100 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 5100MH.

Estimated Continuous Field Runtime: 7.1 hrs

Approximately 7.1 hours of continuous field operation at ~75% rated power on a full tank (37 gal / 140.1 L).

Estimated 75% Load Fuel Burn~5.2 gal/hr (19.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours