John Deere 6920 Premium

The John Deere 6920 Premium is a tractor produced by John Deere. It is equipped with a 414.1 ci 6.8 L engine. The listed engine power is Diesel (net): 150 hp / 111.9 kW. Transmission: AutoQuad II. Operating weight: 12,965 lbs 5880 kg.

Engine Power

Diesel (net): 150 hp / 111.9 kW

Fuel & Capacities

66.1 gal 250.2 L

Transmission

AutoQuad II

Operating Weight

12,965 lbs 5880 kg

Overview

	2001 - 2006 Model year 2001-20032003-2006 6020 SeriesUtility tractor 6020 Series Utility tractor

Production
Manufacturer	John Deere
Utility tractor

John Deere 6920 Premium Engine
John Deere 6.8L 6-cyl diesel
Fuel tank	66.1 gal 250.2 L
Engine details ...

John Deere 6920 Premium Transmission
20-speed partial power shift
Transmission details ...

John Deere 6920 Premium Power
Engine (net)	150 hp 111.9 kW
PTO (claimed)	134 hp 99.9 kW

Mechanical
Four-wheel drive
Steering	hydrostatic power
Wet disc brakes
Cab standard.

Hydraulics
Type	closed center load sensing
Pressure	2900 psi 200.0 bar
Pump flow	25.4 gpm 96.1 lpm

Tractor hitch
Rear Type	II/IIIN
Rear lift	18,520 lbs 8400 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000

Dimensions & Tires
Weight	12,965 lbs 5880 kg
Front tire	16.9R28
Rear tire	20.8R38
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	90
	115
Battery volts	12

References

6020 Series published in 2003, by John Deere

Engine

Engine Detail — 414.1 ci / 6.8 L Diesel

Manufacturer	John Deere 6068T
Configuration	turbocharged intercooled diesel, 6-cylinder, liquid-cooled
Displacement	414.1 ci 6.8 L
Bore/Stroke	4.19x5.00 inches 106 x 127 mm
Rated Power (net)	150 hp 111.9 kW
Rated RPM	2100
Idle RPM	850-2250
Operating RPM	1300-2100
Torque	506.0 lb-ft 686.1 Nm
Torque RPM	1400
Firing order	1-5-3-6-2-4
Starter	electric
Starter volts	12
Intake valve clearance	0.014 inches 0.356 mm
Exhaust valve clearance	0.018 inches 0.457 mm

Transmission

Transmission — PowrQuad Plus

Transmission	PowrQuad Plus
Type	partial power shift
Gears	20 forward and reverse

Transmission — AutoQuad II

Transmission	AutoQuad II
Type	partial power shift
Gears	20 forward and reverse

Dimensions

John Deere 6920 Premium Tires
Standard tires (ag)	Front: 16.9R28. Rear: 20.8R38

Dimensions

John Deere 6920 Premium Weight
	12,965 lbs 5880 kg
Max capacity	24,250 lbs 10999 kg
Max front axle	10,140 lbs 4599 kg
	11,020 lbs (braked axle) 4998 kg
Max rear axle	17,185 lbs 7795 kg

Recommended Implements & Sizing Guide

Engineering recommendations for John Deere 6920 Premium based on its 150 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	5 to 7 Bottom (18")5 - 7 铧 (45 cm)	Commercial / Field Scale	Large acreage tillage; requires front ballast weights.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 6920 Premium.

Estimated Continuous Field Runtime: 8.5 hrs

Approximately 8.5 hours of continuous field operation at ~75% rated power on a full tank (66.1 gal / 250.2 L).

Estimated 75% Load Fuel Burn~7.8 gal/hr (29.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours